-
Notifications
You must be signed in to change notification settings - Fork 52
NI SCOPE Peer To Peer Streaming Attributes
ni-siray edited this page May 7, 2021
·
2 revisions
- NISCOPE_ATTRIBUTE_P2P_ENABLED
- NISCOPE_ATTRIBUTE_P2P_CHANNELS_TO_STREAM
- NISCOPE_ATTRIBUTE_P2P_ENDPOINT_SIZE
- NISCOPE_ATTRIBUTE_P2P_SAMPLES_AVAIL_IN_ENDPOINT
- NISCOPE_ATTRIBUTE_P2P_MOST_SAMPLES_AVAIL_IN_ENDPOINT
- NISCOPE_ATTRIBUTE_P2P_SAMPLES_TRANSFERRED
- NISCOPE_ATTRIBUTE_P2P_ENDPOINT_OVERFLOW
- NISCOPE_ATTRIBUTE_P2P_FIFO_ENDPOINT_COUNT
- NISCOPE_ATTRIBUTE_P2P_ONBOARD_MEMORY_ENABLED
- NISCOPE_ATTRIBUTE_P2P_STREAM_RELATIVE_TO
- NISCOPE_ATTRIBUTE_P2P_SAMPLES_TRANSFERRED_PER_RECORD
- NISCOPE_ATTRIBUTE_P2P_MANUAL_CONFIGURATION_ENABLED
- NISCOPE_ATTRIBUTE_P2P_DATA_TRANS_PERMISSION_ADDR
- NISCOPE_ATTRIBUTE_P2P_DATA_TRANS_PERMISSION_ADDR_TYPE
- NISCOPE_ATTRIBUTE_P2P_DESTINATION_WINDOW_ADDR
- NISCOPE_ATTRIBUTE_P2P_DESTINATION_WINDOW_ADDR_TYPE
- NISCOPE_ATTRIBUTE_P2P_DESTINATION_WINDOW_SIZE
- NISCOPE_ATTRIBUTE_P2P_NOTIFY_PUSH_MESSAGE_ON
- NISCOPE_ATTRIBUTE_P2P_NOTIFY_MESSAGE_PUSH_ADDR
- NISCOPE_ATTRIBUTE_P2P_NOTIFY_MESSAGE_PUSH_ADDR_TYPE
- NISCOPE_ATTRIBUTE_P2P_NOTIFY_MESSAGE_PUSH_VALUE
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| Boolean | R/W | Endpoint | None | None |
Specifies whether the digitizer writes data to the peer-to-peer endpoint.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|---|
| Default Value: FALSE |
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| String | R/W | Endpoint | None | None |
Specifies which channels are written to a peer-to-peer endpoint. If multiple channels are specified, the channels are interleaved by sample.
| !Note | Note This attribute can only be used with high-speed digitizers that support peer-to-peer streaming. |
|---|
| !Note | Note This attribute must either be unused or set to all enabled channels on NI 5160/5162 digitizers. |
|---|---|
| Default Value: 0 |
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt32 | RO | Endpoint | None | None |
Returns the size in samples of the peer-to-peer endpoint.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt32 | RO | Endpoint | None | None |
Returns the current number of samples available to stream from a peer-to-peer endpoint.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt32 | RO | Endpoint | None | None |
Returns the most number of samples available to stream from a peer-to-peer endpoint since the last time this attribute was read.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt64 | RO | Endpoint | None | None |
Returns the number of samples transferred through the peer-to-peer endpoint since it was last reset.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| Boolean | RO | Endpoint | None | None |
Returns TRUE if the endpoint FIFO has overflowed. Reset the endpoint to clear the overflow condition.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt32 | RO | N/A | None | None |
Returns the number of FIFO-based peer-to-peer endpoints this device supports.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| Boolean | R/W | N/A | None | None |
Specifies whether the digitizer writes data to onboard memory when a peer-to-peer endpoint is enabled.
| !Note | Note This attribute can only be used with high-speed digitizers that support peer-to-peer streaming. |
|---|
| !Note | Note This attribute is not supported on NI 5160/5162 digitizers. |
|---|
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt32 | RW | Endpoint | None | None |
Determines which trigger peer-to-peer data is streamed relative to.
| !Note | Note On the NI 5122/5622, only NISCOPE_VAL_STREAM_RELATIVE_TO_START_TRIGGER is valid for this attribute. |
|---|---|
| Default Value: NISCOPE_VAL_STREAM_RELATIVE_TO_START_TRIGGER (0) |
NISCOPE_VAL_STREAM_RELATIVE_TO_START_TRIGGER (0)
NISCOPE_VAL_STREAM_RELATIVE_TO_REFERENCE_TRIGGER (1)
NISCOPE_VAL_STREAM_RELATIVE_TO_SYNC_TRIGGER (2)
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt32 | RO | Endpoint | None | None |
Returns the number of samples transferred per record when you set the NISCOPE_ATTRIBUTE_P2P_STREAM_RELATIVE_TO attribute to NISCOPE_VAL_STREAM_RELATIVE_TO_REFERENCE_TRIGGER or NISCOPE_VAL_STREAM_RELATIVE_TO_SYNC_TRIGGER.
| !Note | Note This attribute is only supported on NI 5160/5162 digitizers. |
|---|
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| Boolean | R/W | Endpoint | None | None |
Enables/disables the advanced attributes for a peer-to-peer endpoint. These attributes cannot be used if an endpoint is being configured by NI-P2P, or a resource reservation error will occur.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt64 | RO | Endpoint | None | None |
Returns the address of a hardware register used to grant permission for the peer-to-peer endpoint to write data to another peer. The type of this address is determined by the NISCOPE_ATTRIBUTE_P2P_DATA_TRANS_PERMISSION_ADDR_TYPE attribute. Permission is granted in bytes and the register is additive.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt32 | R/W | Endpoint | None | None |
Specifies the type of address returned from the NISCOPE_ATTRIBUTE_P2P_DATA_TRANS_PERMISSION_ADDR attribute.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|---|
| Default Value: NISCOPE_VAL_ADDR_VIRTUAL |
NISCOPE_VAL_ADDR_PHYSICAL (0)
NISCOPE_VAL_ADDR_VIRTUAL (1)
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt64 | R/W | Endpoint | None | None |
Specifies the destination for data written by the peer-to-peer endpoint. The type of this address is specified by the NISCOPE_ATTRIBUTE_P2P_DESTINATION_WINDOW_ADDR_TYPE attribute.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|
A valid, non-NULL physical or virtual address.
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt32 | R/W | Endpoint | None | None |
Specifies the type of the NISCOPE_ATTRIBUTE_P2P_DESTINATION_WINDOW_ADDR attribute.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|---|
| Default Value: NISCOPE_VAL_ADDR_VIRTUAL |
NISCOPE_VAL_ADDR_PHYSICAL (0)
NISCOPE_VAL_ADDR_VIRTUAL (1)
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt64 | R/W | Endpoint | None | None |
Specifies the size, in bytes, of the destination window determined by the NISCOPE_ATTRIBUTE_P2P_DESTINATION_WINDOW_ADDR and the NISCOPE_ATTRIBUTE_P2P_DESTINATION_WINDOW_ADDR_TYPE attributes.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|
Any non-NULL value.
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt32 | R/W | Endpoint | None | None |
Specifies the event to push the NISCOPE_ATTRIBUTE_P2P_NOTIFY_MESSAGE_PUSH_VALUE attribute to the NISCOPE_ATTRIBUTE_P2P_NOTIFY_MESSAGE_PUSH_ADDR attribute. Setting this attribute to NISCOPE_VAL_NOTIFY_DONE pushes the message when the acquisition has completed.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|---|
| Default Value: NISCOPE_VAL_NOTIFY_NEVER |
NISCOPE_VAL_NOTIFY_NEVER (0)
NISCOPE_VAL_NOTIFY_DONE (1)
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt64 | R/W | Endpoint | None | None |
Specifies the address to Push Message push Value to on the event specified by the NISCOPE_ATTRIBUTE_P2P_NOTIFY_PUSH_MESSAGE_ON attribute.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|
- Peer-to-Peer Streaming
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt32 | R/W | Endpoint | None | None |
Specifies the type of the NISCOPE_ATTRIBUTE_P2P_NOTIFY_MESSAGE_PUSH_ADDR attribute.
| !Note | Note This attribute can be used only with high-speed digitizers that support peer-to-peer streaming. |
|---|---|
| Default Value: NISCOPE_VAL_ADDR_VIRTUAL |
NISCOPE_VAL_ADDR_PHYSICAL (0)
NISCOPE_VAL_ADDR_VIRTUAL (1)
| Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
| ViInt64 | R/W | Endpoint | None | None |
Specifies the value to be pushed to the NISCOPE_ATTRIBUTE_P2P_NOTIFY_MESSAGE_PUSH_ADDR attribute on the event specified by the NISCOPE_ATTRIBUTE_P2P_NOTIFY_PUSH_MESSAGE_ON attribute.
| !Note | Note This attribute is only supported by devices that support peer-to-peer streaming. |
|---|
- Peer-to-Peer Streaming
Creating and Setting Up a gRPC Server
Session Utilities API Reference
gRPC API Differences From C API
Sharing Driver Sessions Between Clients
C API Docs
NI-DAQmx
- gRPC API Differences From C API
- Task Configuration And Control
- Channel Configuration And Creation
- Timing
- Triggering
- Read Functions
- Write Functions
- Export Hardware Signals
- Scale Configuration
- Internal Buffer Configuration
- Advanced Functions
- System Configuration
- Error Handling
- Buffer Attributes
- Calibration Info Attributes
- Channel Attributes
- Device Attributes
- Export Signal Attributes
- Persisted Channel Attributes
- Persisted Scale Attributes
- Persisted Task Attributes
- Physical Channel Attributes
- Read Attributes
- Scale Attributes
- System Attributes
- Task Attributes
- Timing Attributes
- Trigger Attributes
- Watchdog Attributes
- Write Attributes
NI-DCPOWER
- Setup Functions
- Configure Functions
- Measurement Functions
- Control Functions
- Trigger And Event
- Attribute Functions
- Query Functions
- Calibration Functions
- Utility Functions
- Supported Device
- Source Attributes
- Transient Attributes
- Voltage Attributes
- Current Attributes
- Pulse Voltage Attributes
- Pulse Current Attributes
- Cutoff Attributes
- Measurement Attributes
- Trigger Attributes Functions
- Event Attributes
- Advanced Attributes
- Inherent Ivi Attributes
- Supported Device Attributes
NI-DIGITAL PATTERN DRIVER
- Init And Close Functions
- Session Locking Functions
- Utility Functions
- Error Handling Functions
- Calibration Functions
- Attributes Functions
- Pin Map Functions
- Low Level Functions
- Low Level Action Functions
- Pin Control Functions
- Static IO Functions
- Clock Generator Functions
- Levels And Timing Functions
- TDR Functions
- PPMU Configuration Functions
- DC Voltage Functions
- DC Current Functions
- PPMU Action Functions
- Pattern Configuration Functions
- Pattern Action Functions
- History Ram Functions
- Source Memory Functions
- Capture Memory Functions
- Triggers And Events Functions
- Conditional Jump Trigger Functions
- Sequencer Flag Functions
- Sequencer Register Functions
- Match Fail Combination Functions
- Pattern Results Functions
- Sort Results Functions
- Frequency Measurement Functions
- IVI Inherent Attributes
- Specific Driver Information Attributes, Read Only
- Driver Setup Information Attributes
- Device Attributes
- Pin Control Attributes
- Level Configuration Attributes
- Trigger Configuration Attributes
- PPMU Attributes
- Patterns Attributes
- Pattern Opcode Event Attributes
- Timing Offset Attributes
- Keep Alive Attributes
- Frequency Measurement Attributes
- Clock Generator Attributes
- History RAM
- Synchronization Attributes
- TDR Endpoint Termination Attributes
NI-FGEN
- Setup Functions
- Configuration Functions
- Standard Output Functions
- Arbitrary Waveform Output Functions
- Arbitrary Sequence Output Functions
- Incremental Waveform Write Functions
- Configure Clock Functions
- Trigger And Syncronizations Functions
- 5404 Routing Functions
- Script Output Functions
- Configure Onboard Signal Processing Functions
- Configure Peer To Peer Functions
- Attribute Functions
- Waveform Control Functions
- Error Functions
- Output Attributes
- Arbitrary Waveform Attributes
- Data Transfer Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Attributes
- Standard Function Attributes
- Clock Attributes
- Event Attributes
- Triggering Attributes
- Instrument Specific Attributes
- Inherent IVI Attributes
- 5401 5411 5431
NI-RFmx Bluetooth
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Packet Attributes
- Auto Detect Signal Attributes
- Modacc Attributes
- ACP Attributes
- Twenty dB Attributes
- Frequency Range Attributes
- TXP Attributes
- Advanced Attributes
NI-RFmx NR
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attributes Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Signal Detection Attributes
- Component Carrier Attributes
- List Attributes
- Modacc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- TXP Attributes
- Pvt Attributes
- Advanced Attributes
NI-RFmx LTE
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Ch Configuration Functions
- NB IoT Configuration Functions
- ModAcc Configuration Functions
- ACP Configuration Functions
- CHP Configuration Functions
- OBW Configuration Functions
- SEM Configuration Functions
- PVT Configuration Functions
- SlotPhase Configuration Functions
- SlotPower Configuration Functions
- Set And Get Attribute Functions
- ModAcc Fetch Functions
- ACP Fetch Functions
- CHP Fetch Functions
- OBW Fetch Functions
- SEM Fetch Functions
- PVT Fetch Functions
- SlotPhase Fetch Functions
- SlotPower Fetch Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Component Carrier Attributes
- ModAcc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- PVT Attributes
- SlotPhase Attributes
- SlotPower Attributes
- Advanced Attributes
NI-RFmx SpecAn
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Read Functions
- Fetch Functions
- Utility Functions
- Marker Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- ACP Attributes
- Cdf Attributes
- CHP Attributes
- Fcnt Attributes
- Harm Attributes
- OBW Attributes
- SEM Attributes
- Spectrum Attributes
- Spur Attributes
- TXP Attributes
- AMPM Attributes
- Dpd Attributes
- IQ Attributes
- IM Attributes
- NF Attributes
- Phasenoise Attributes
- PAVT Attributes
- Advanced Attributes
NI-RFmx WLAN
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch DSSS ModAcc Functions
- Fetch OFDM ModAcc Functions
- Fetch SEM Functions
- Fetch TXP Functions
- Fetch PowerRamp Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- OFDM Attributes
- Auto Detect Signal Attributes
- DSSS ModAcc Attributes
- OFDM ModAcc Attributes
- SEM Attributes
- TXP Attributes
- PowerRamp Attributes
- Advanced Attributes
NI-RFSA
- General Functions
- Configuration Functions
- Acquisition Functions
- Utility Functions
- Calibration Functions
- General Attributes
- Vertical Attributes
- Signal Path Attributes
- Acquisition Attributes
- Acquisition Attributes
- Triggers Attributes
- Events Attributes
- Device Characteristics Attributes
- Peer To Peer Streaming Attributes
- Configuration List Attributes
- Inherent IVI Properties Attributes
- De-embedding Attributes
- Self Calibration Attributes
- Factory Calibration Attributes
- External Alignment Attributes
- Device Specific Attributes
NI-RFSG
- General Functions
- Generation Configuration
- Utility Functions
- Calibration Functions
- Arb Attributes
- Clock Attributes
- Configuration List Attributes
- De-embedding Attributes
- Device Characteristics Attributes
- Device Specific Attributes
- Events Attributes
- External Calibration Attributes
- Inherent IVI Attributes Attributes
- IQ Impairment Attributes
- Load Configurations Attributes
- Modulation Attributes
- Obsolete Attributes
- Peer To Peer Attributes
- RF Attributes
- Self Calibration Attributes
- Triggers Attributes
NI-SCOPE
- Setup Functions
- Configure Functions
- Attribute Functions
- Acquisition Functions
- Measurement Functions
- Calibrate Functions
- Utility Funcitons
- Error Handling Functions
- IVI Compliance Or Obsolete Functions
- Vertical Attributes
- Horizontal Attributes
- Trigger Attributes
- Clocking Attributes
- Synchronization Attributes
- Acquisition Attributes
- Waveform Measurements Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Streaming Attributes
- Device Attributes
- IVI Or Obsolete Attributes
- Instrument Capabilities Attributes
- If Digitizer Attributes
NI-XNET
- gRPC API differences from C APIs
- General Functions
- Cluster Properties
- Database Properties
- Device Properties
- ECU Properties
- Frame Properties
- Interface Properties
- LIN Schedule Entry Properties
- LIN Schedule Properties
- PDU Properties
- Session Ethernet Properties
- Session Frame Properties
- Session Interface Properties
- Session Properties
- Session SAE J1939 Properties
- Signal Properties
- Subframe Properties
- System Properties
- IP-Stack Functions
- Socket Options
- Socket Functions