-
Notifications
You must be signed in to change notification settings - Fork 52
NI FGEN Standard Function Attributes
- NIFGEN_ATTRIBUTE_FUNC_WAVEFORM
- NIFGEN_ATTRIBUTE_FUNC_AMPLITUDE
- NIFGEN_ATTRIBUTE_FUNC_DC_OFFSET
- NIFGEN_ATTRIBUTE_FUNC_START_PHASE
- NIFGEN_ATTRIBUTE_FUNC_DUTY_CYCLE_HIGH
- NIFGEN_ATTRIBUTE_SYNC_DUTY_CYCLE_HIGH
- NIFGEN_ATTRIBUTE_SYNC_OUT_OUTPUT_TERMINAL
- NIFGEN_ATTRIBUTE_FUNC_FREQUENCY
- NIFGEN_ATTRIBUTE_FUNC_MAX_BUFFER_SIZE
- NIFGEN_ATTRIBUTE_FUNC_BUFFER_SIZE
- NIFGEN_ATTRIBUTE_FREQ_LIST_HANDLE
- NIFGEN_ATTRIBUTE_MAX_NUM_FREQ_LISTS
- NIFGEN_ATTRIBUTE_MAX_FREQ_LIST_LENGTH
- NIFGEN_ATTRIBUTE_MIN_FREQ_LIST_LENGTH
- NIFGEN_ATTRIBUTE_FREQ_LIST_DURATION_QUANTUM
- NIFGEN_ATTRIBUTE_MAX_FREQ_LIST_DURATION
- NIFGEN_ATTRIBUTE_MIN_FREQ_LIST_DURATION
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1250101 | ViInt32 | R/W | Channel | None | niFgen_ConfigureStandardWaveform |
- [niFgen_DefineUserStandardWaveform]|
Specifies which standard waveform the signal generator produces.
Use this attribute only when the NIFGEN_ATTRIBUTE_OUTPUT_MODE attribute is set to NIFGEN_VAL_OUTPUT_FUNC.
Defined Values
| NIFGEN_VAL_WFM_SINE | Sinusoid waveform |
|---|---|
| NIFGEN_VAL_WFM_SQUARE | Square waveform |
| NIFGEN_VAL_WFM_TRIANGLE | Triangle waveform |
| NIFGEN_VAL_WFM_RAMP_UP | Positive ramp waveform |
| NIFGEN_VAL_WFM_RAMP_DOWN | Negative ramp waveform |
| NIFGEN_VAL_WFM_DC | Constant voltage |
| NIFGEN_VAL_WFM_NOISE | White noise |
| NIFGEN_VAL_WFM_USER | User-defined waveform as defined with the niFgen_DefineUserStandardWaveform function |
Default Value: NIFGEN_VAL_WFM_SINE
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1250102 | ViReal64 | R/W | Channel | None | niFgen_ConfigureStandardWaveform |
Controls the amplitude of the standard waveform that the signal generator produces. This value is the amplitude at the output terminal.
For example, to produce a waveform ranging from –5.00 V to +5.00 V, set this attribute to 10.00 V.
Note: This parameter does not affect signal generator behavior when you set the waveform parameter of the niFgen_ConfigureStandardWaveform function to NIFGEN_VAL_WFM_DC.
Units: Vpk-pk
Default Value: None
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1250103 | ViReal64 | R/W | Channel | None | niFgen_ConfigureStandardWaveform |
Controls the DC offset of the standard waveform that the signal generator produces. This value is the offset at the output terminal. The value is the offset from ground to the center of the waveform that you specify with the waveform parameter of the niFgen_ConfigureStandardWaveform function.
For example, to configure a waveform with an amplitude of 10.00 V to range from 0.00 V to +10.00 V, set this attribute to 5.00 V.
Units: volts
Default Value: None
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1250105 | ViReal64 | R/W | Channel | None | niFgen_ConfigureStandardWaveform |
Controls horizontal offset of the standard waveform the signal generator produces. Specify this attribute in degrees of one waveform cycle.
A start phase of 180 degrees means output generation begins halfway through the waveform. A start phase of 360 degrees offsets the output by an entire waveform cycle, which is identical to a start phase of 0 degrees.
Note: This parameter does not affect signal generator behavior when you set the waveform parameter of the niFgen_ConfigureStandardWaveform function to NIFGEN_VAL_WFM_DC.
Units: Degrees of one cycle
Default Value: None
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1250106 | ViReal64 | R/W | Channel | None | None |
Controls the duty cycle of the square wave the signal generator produces. Specify this attribute as a percentage of the time the square wave is high in a cycle.
Note: This parameter only affects signal generator behavior when you set the waveform parameter of the niFgen_ConfigureStandardWaveform function to NIFGEN_VAL_WFM_SQUARE.
Units: Percentage of time the waveform is high
Default Value: 50%
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150105 | ViReal64 | R/W | N/A | None | None |
Controls the duty cycle of the square wave the signal generator produces on the SYNC OUT connector. Specify this attribute as a percentage of the time the square wave is high in each cycle.
Units: Percentage of the time the waveform is high
Default Value: 50%
| Numeric Value | Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|---|
| 1150330 | ViString | R/W | N/A | None | None |
Specifies the terminal to export the SYNC OUT signal. For a list of the terminals available on your device, refer to the Routes topic for your device or the the Device Routes tab in MAX. This attribute is not supported for all devices.
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1250104 | ViReal64 | R/W | Channel | None | niFgen_ConfigureStandardWaveform |
Controls the frequency of the standard waveform that the signal generator produces.
Notes This parameter does not affect signal generator behavior when you set the waveform parameter of the niFgen_ConfigureStandardWaveform function to NIFGEN_VAL_WFM_DC.
For NIFGEN_VAL_WFM_SINE, the range is between 0 MHz and 16 MHz, but the range is between 0 MHz and 1 MHz for all other waveforms. Units: hertz (Hz)
Default Value: None
| Numeric Value | Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|---|
| 1150239 | ViInt32 | R/W | N/A | None | None |
Specifies the maximum number of samples that can be used in the standard function waveform buffer. Increasing this value may increase the quality of the waveform. This attribute is valid only on devices that implement Standard Function output mode in software, and it is read-only for all other devices.
Note: Refer to the Standard Function Mode topic in the NI Signal Generators Help for more information about the implementation of Standard Function output mode on your device.
| Numeric Value | Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|---|
| 1150238 | ViInt32 | R/W | N/A | None | None |
Contains the number of samples used in the standard function waveform buffer. This attribute is valid only on devices that implement Standard Function output mode in software, and it is read-only for all other devices.
Note: Refer to the Standard Function Mode topic for more information about the implementation of Standard Function output mode on your device.
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150208 | ViInt32 | R/W | N/A | None | None |
Sets which frequency list the signal generator produces. Create a frequency list using the niFgen_CreateFreqList function. The niFgen_CreateFreqList function returns a handle that you can use to identify the list.
Note: You cannot change this attribute while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150209 | ViInt32 | RO | N/A | None | None |
Returns the maximum number of frequency lists the signal generator allows.
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150211 | ViInt32 | RO | N/A | None | None |
Returns the maximum number of steps that can be in a frequency list.
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150210 | ViInt32 | RO | N/A | None | None |
Returns the minimum number of frequency lists that the signal generator allows.
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150214 | ViReal64 | R/W | N/A | None | None |
Returns the quantum of which all durations must be a multiple in a frequency list.
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150213 | ViReal64 | RO | N/A | None | None |
Specifies the maximum duration of any one step in the frequency list.
Note: You cannot change this attribute while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150212 | ViReal64 | RO | N/A | None | None |
Returns the minimum duration in seconds of any one step in a frequency list.
Creating and Setting Up a gRPC Server
Session Utilities API Reference
gRPC API Differences From C API
Sharing Driver Sessions Between Clients
C API Docs
NI-DAQmx
- gRPC API Differences From C API
- Task Configuration And Control
- Channel Configuration And Creation
- Timing
- Triggering
- Read Functions
- Write Functions
- Export Hardware Signals
- Scale Configuration
- Internal Buffer Configuration
- Advanced Functions
- System Configuration
- Error Handling
- Buffer Attributes
- Calibration Info Attributes
- Channel Attributes
- Device Attributes
- Export Signal Attributes
- Persisted Channel Attributes
- Persisted Scale Attributes
- Persisted Task Attributes
- Physical Channel Attributes
- Read Attributes
- Scale Attributes
- System Attributes
- Task Attributes
- Timing Attributes
- Trigger Attributes
- Watchdog Attributes
- Write Attributes
NI-DCPOWER
- Setup Functions
- Configure Functions
- Measurement Functions
- Control Functions
- Trigger And Event
- Attribute Functions
- Query Functions
- Calibration Functions
- Utility Functions
- Supported Device
- Source Attributes
- Transient Attributes
- Voltage Attributes
- Current Attributes
- Pulse Voltage Attributes
- Pulse Current Attributes
- Cutoff Attributes
- Measurement Attributes
- Trigger Attributes Functions
- Event Attributes
- Advanced Attributes
- Inherent Ivi Attributes
- Supported Device Attributes
NI-DIGITAL PATTERN DRIVER
- Init And Close Functions
- Session Locking Functions
- Utility Functions
- Error Handling Functions
- Calibration Functions
- Attributes Functions
- Pin Map Functions
- Low Level Functions
- Low Level Action Functions
- Pin Control Functions
- Static IO Functions
- Clock Generator Functions
- Levels And Timing Functions
- TDR Functions
- PPMU Configuration Functions
- DC Voltage Functions
- DC Current Functions
- PPMU Action Functions
- Pattern Configuration Functions
- Pattern Action Functions
- History Ram Functions
- Source Memory Functions
- Capture Memory Functions
- Triggers And Events Functions
- Conditional Jump Trigger Functions
- Sequencer Flag Functions
- Sequencer Register Functions
- Match Fail Combination Functions
- Pattern Results Functions
- Sort Results Functions
- Frequency Measurement Functions
- IVI Inherent Attributes
- Specific Driver Information Attributes, Read Only
- Driver Setup Information Attributes
- Device Attributes
- Pin Control Attributes
- Level Configuration Attributes
- Trigger Configuration Attributes
- PPMU Attributes
- Patterns Attributes
- Pattern Opcode Event Attributes
- Timing Offset Attributes
- Keep Alive Attributes
- Frequency Measurement Attributes
- Clock Generator Attributes
- History RAM
- Synchronization Attributes
- TDR Endpoint Termination Attributes
NI-FGEN
- Setup Functions
- Configuration Functions
- Standard Output Functions
- Arbitrary Waveform Output Functions
- Arbitrary Sequence Output Functions
- Incremental Waveform Write Functions
- Configure Clock Functions
- Trigger And Syncronizations Functions
- 5404 Routing Functions
- Script Output Functions
- Configure Onboard Signal Processing Functions
- Configure Peer To Peer Functions
- Attribute Functions
- Waveform Control Functions
- Error Functions
- Output Attributes
- Arbitrary Waveform Attributes
- Data Transfer Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Attributes
- Standard Function Attributes
- Clock Attributes
- Event Attributes
- Triggering Attributes
- Instrument Specific Attributes
- Inherent IVI Attributes
- 5401 5411 5431
NI-RFmx Bluetooth
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Packet Attributes
- Auto Detect Signal Attributes
- Modacc Attributes
- ACP Attributes
- Twenty dB Attributes
- Frequency Range Attributes
- TXP Attributes
- Advanced Attributes
NI-RFmx NR
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attributes Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Signal Detection Attributes
- Component Carrier Attributes
- List Attributes
- Modacc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- TXP Attributes
- Pvt Attributes
- Advanced Attributes
NI-RFmx LTE
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Ch Configuration Functions
- NB IoT Configuration Functions
- ModAcc Configuration Functions
- ACP Configuration Functions
- CHP Configuration Functions
- OBW Configuration Functions
- SEM Configuration Functions
- PVT Configuration Functions
- SlotPhase Configuration Functions
- SlotPower Configuration Functions
- Set And Get Attribute Functions
- ModAcc Fetch Functions
- ACP Fetch Functions
- CHP Fetch Functions
- OBW Fetch Functions
- SEM Fetch Functions
- PVT Fetch Functions
- SlotPhase Fetch Functions
- SlotPower Fetch Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Component Carrier Attributes
- ModAcc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- PVT Attributes
- SlotPhase Attributes
- SlotPower Attributes
- Advanced Attributes
NI-RFmx SpecAn
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Read Functions
- Fetch Functions
- Utility Functions
- Marker Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- ACP Attributes
- Cdf Attributes
- CHP Attributes
- Fcnt Attributes
- Harm Attributes
- OBW Attributes
- SEM Attributes
- Spectrum Attributes
- Spur Attributes
- TXP Attributes
- AMPM Attributes
- Dpd Attributes
- IQ Attributes
- IM Attributes
- NF Attributes
- Phasenoise Attributes
- PAVT Attributes
- Advanced Attributes
NI-RFmx WLAN
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch DSSS ModAcc Functions
- Fetch OFDM ModAcc Functions
- Fetch SEM Functions
- Fetch TXP Functions
- Fetch PowerRamp Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- OFDM Attributes
- Auto Detect Signal Attributes
- DSSS ModAcc Attributes
- OFDM ModAcc Attributes
- SEM Attributes
- TXP Attributes
- PowerRamp Attributes
- Advanced Attributes
NI-RFSA
- General Functions
- Configuration Functions
- Acquisition Functions
- Utility Functions
- Calibration Functions
- General Attributes
- Vertical Attributes
- Signal Path Attributes
- Acquisition Attributes
- Acquisition Attributes
- Triggers Attributes
- Events Attributes
- Device Characteristics Attributes
- Peer To Peer Streaming Attributes
- Configuration List Attributes
- Inherent IVI Properties Attributes
- De-embedding Attributes
- Self Calibration Attributes
- Factory Calibration Attributes
- External Alignment Attributes
- Device Specific Attributes
NI-RFSG
- General Functions
- Generation Configuration
- Utility Functions
- Calibration Functions
- Arb Attributes
- Clock Attributes
- Configuration List Attributes
- De-embedding Attributes
- Device Characteristics Attributes
- Device Specific Attributes
- Events Attributes
- External Calibration Attributes
- Inherent IVI Attributes Attributes
- IQ Impairment Attributes
- Load Configurations Attributes
- Modulation Attributes
- Obsolete Attributes
- Peer To Peer Attributes
- RF Attributes
- Self Calibration Attributes
- Triggers Attributes
NI-SCOPE
- Setup Functions
- Configure Functions
- Attribute Functions
- Acquisition Functions
- Measurement Functions
- Calibrate Functions
- Utility Funcitons
- Error Handling Functions
- IVI Compliance Or Obsolete Functions
- Vertical Attributes
- Horizontal Attributes
- Trigger Attributes
- Clocking Attributes
- Synchronization Attributes
- Acquisition Attributes
- Waveform Measurements Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Streaming Attributes
- Device Attributes
- IVI Or Obsolete Attributes
- Instrument Capabilities Attributes
- If Digitizer Attributes
NI-XNET
- gRPC API differences from C APIs
- General Functions
- Cluster Properties
- Database Properties
- Device Properties
- ECU Properties
- Frame Properties
- Interface Properties
- LIN Schedule Entry Properties
- LIN Schedule Properties
- PDU Properties
- Session Ethernet Properties
- Session Frame Properties
- Session Interface Properties
- Session Properties
- Session SAE J1939 Properties
- Signal Properties
- Subframe Properties
- System Properties
- IP-Stack Functions
- Socket Options
- Socket Functions