-
Notifications
You must be signed in to change notification settings - Fork 52
NI DCPOWER Pulse Voltage Attributes
- NIDCPOWER_ATTRIBUTE_PULSE_VOLTAGE_LEVEL
- NIDCPOWER_ATTRIBUTE_PULSE_BIAS_VOLTAGE_LEVEL
- NIDCPOWER_ATTRIBUTE_PULSE_VOLTAGE_LEVEL_RANGE
- NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT
- NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_HIGH
- NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_LOW
- NIDCPOWER_ATTRIBUTE_PULSE_BIAS_CURRENT_LIMIT
- NIDCPOWER_ATTRIBUTE_PULSE_BIAS_CURRENT_LIMIT_HIGH
- NIDCPOWER_ATTRIBUTE_PULSE_BIAS_CURRENT_LIMIT_LOW
- NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_RANGE
| Numeric Value | Data type |
Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150080 | ViReal64 | R/W | Channel | None | niDCPower_ConfigurePulseVoltageLevel |
Specifies the pulse voltage level, in volts, that the device attempts to generate on the specified channel(s) during the on phase of a pulse.
This attribute is applicable only if the NIDCPOWER_ATTRIBUTE_OUTPUT_FUNCTION attribute is set to NIDCPOWER_VAL_PULSE_VOLTAGE.
| ! | Note The channel must be enabled for the specified voltage level to take effect. Refer to the NIDCPOWER_ATTRIBUTE_OUTPUT_ENABLED attribute for more information about enabling the output channel. |
|---|
| !Note | Note This attribute is not supported by all devices. Refer to Supported Attributes by Device for information about supported devices. |
|---|---|
| Valid Values: The valid values for this attribute are defined by the values you specify for the NIDCPOWER_ATTRIBUTE_PULSE_VOLTAGE_LEVEL_RANGE attribute. |
| Numeric Value | Data type |
Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150082 | ViReal64 | R/W | Channel | None | niDCPower_ConfigurePulseBiasVoltageLevel |
Specifies the pulse bias voltage level, in volts, that the device attempts to generate on the specified channel(s) during the off phase of a pulse.
This attribute is applicable only if the NIDCPOWER_ATTRIBUTE_OUTPUT_FUNCTION attribute is set to NIDCPOWER_VAL_PULSE_VOLTAGE.
| ! | Note The channel must be enabled for the specified voltage level to take effect. Refer to the NIDCPOWER_ATTRIBUTE_OUTPUT_ENABLED attribute for more information about enabling the output channel. |
|---|
| !Note | Note This attribute is not supported by all devices. Refer to Supported Attributes by Device for information about supported devices. |
|---|---|
| Valid Values: The valid values for this attribute are defined by the values you specify for the NIDCPOWER_ATTRIBUTE_PULSE_VOLTAGE_LEVEL_RANGE attribute. |
| Numeric Value | Data type |
Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150084 | ViReal64 | R/W | Channel | None | niDCPower_ConfigurePulseVoltageLevelRange |
Specifies the pulse voltage level range, in volts, for the specified channel(s).
The range defines the valid values at which you can set the pulse voltage level and pulse bias voltage level.
This attribute is applicable only if the NIDCPOWER_ATTRIBUTE_OUTPUT_FUNCTION attribute is set to NIDCPOWER_VAL_PULSE_VOLTAGE.
| ! | Note The channel must be enabled for the specified pulse voltage level range to take effect. Refer to the NIDCPOWER_ATTRIBUTE_OUTPUT_ENABLED attribute for more information about enabling the output channel. |
|---|
| !Note | Note This attribute is not supported by all devices. Refer to Supported Attributes by Device for information about supported devices. |
|---|---|
| For valid ranges, refer to the ranges topic for your device in the NI DC Power Supplies and SMUs Help. |
| Numeric Value | Data type |
Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150081 | ViReal64 | R/W | Channel | None | niDCPower_ConfigurePulseCurrentLimit |
Specifies the pulse current limit, in amps, that the output cannot exceed when generating the desired pulse voltage on the specified channel(s) during the on phase of a pulse.
The limit is specified as a positive value, but symmetric positive and negative limits are enforced simultaneously.
This attribute is applicable only if the NIDCPOWER_ATTRIBUTE_OUTPUT_FUNCTION attribute is set to NIDCPOWER_VAL_PULSE_VOLTAGE and the NIDCPOWER_ATTRIBUTE_COMPLIANCE_LIMIT_SYMMETRY attribute is set to NIDCPOWER_VAL_SYMMETRIC.
| ! | Note The channel must be enabled for the specified current limit to take effect. Refer to the NIDCPOWER_ATTRIBUTE_OUTPUT_ENABLED attribute for more information about enabling the output channel. |
|---|
| !Note | Note This attribute is not supported by all devices. Refer to Supported Attributes by Device for information about supported devices. |
|---|---|
| Valid Values: The valid values for this attribute are defined by the values you specify for the NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_RANGE attribute. |
| Numeric Value | Data type |
Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150193 | ViReal64 | R/W | Channel | None | None |
Specifies the maximum current, in amps, that the output can produce when generating the desired pulse voltage on the specified channel(s) during the on phase of a pulse.
This attribute is applicable only if the NIDCPOWER_ATTRIBUTE_COMPLIANCE_LIMIT_SYMMETRY attribute is set to NIDCPOWER_VAL_ASYMMETRIC and the NIDCPOWER_ATTRIBUTE_OUTPUT_FUNCTION attribute is set to NIDCPOWER_VAL_PULSE_VOLTAGE.
You must also specify NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_LOW to complete the asymmetric range.
| !Note | Note The channel must be enabled and the output relay must be connected for the specified limit to take effect. Refer to the NIDCPOWER_ATTRIBUTE_OUTPUT_ENABLED attribute and the NIDCPOWER_ATTRIBUTE_OUTPUT_CONNECTED attribute for more information about enabling the output channel and connecting the output relay respectively. |
|---|
| !Note | Note Refer to Supported Attributes by Device for information about supported devices. |
|---|---|
| Valid Values: 1% of NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_RANGE, NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_RANGE |
- The range bounded by the limit high and limit low must include zero.
| !Note | Note The limit may be extended beyond the selected limit range if the NIDCPOWER_ATTRIBUTE_OVERRANGING_ENABLED attribute is set to VI_TRUE. |
|---|---|
| Default Value: Refer to Supported Attributes by Device for the default value by device. |
Related Topics:
Ranges
Changing Ranges
Overranging
| Numeric Value | Data type |
Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150194 | ViReal64 | R/W | Channel | None | None |
Specifies the minimum current, in amps, that the output can produce when generating the desired pulse voltage on the specified channel(s) during the on phase of a pulse.
This attribute is applicable only if the NIDCPOWER_ATTRIBUTE_COMPLIANCE_LIMIT_SYMMETRY attribute is set to NIDCPOWER_VAL_ASYMMETRIC and the NIDCPOWER_ATTRIBUTE_OUTPUT_FUNCTION attribute is set to NIDCPOWER_VAL_PULSE_VOLTAGE.
You must also specify NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_HIGH to complete the asymmetric range.
| !Note | Note The channel must be enabled and the output relay must be connected for the specified limit to take effect. Refer to the NIDCPOWER_ATTRIBUTE_OUTPUT_ENABLED attribute and the NIDCPOWER_ATTRIBUTE_OUTPUT_CONNECTED attribute for more information about enabling the output channel and connecting the output relay respectively. |
|---|
| !Note | Note Refer to Supported Attributes by Device for information about supported devices. |
|---|---|
| Valid Values: -NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_RANGE, -1% of NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_RANGE |
- The range bounded by the limit high and limit low must include zero.
| !Note | Note The limit may be extended beyond the selected limit range if the NIDCPOWER_ATTRIBUTE_OVERRANGING_ENABLED attribute is set to VI_TRUE. |
|---|---|
| Default Value: Refer to Supported Attributes by Device for the default value by device. |
Related Topics:
Ranges
Changing Ranges
Overranging
| Numeric Value | Data type |
Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150083 | ViReal64 | R/W | Channel | None | niDCPower_ConfigurePulseBiasCurrentLimit |
Specifies the pulse bias current limit, in amps, that the output cannot exceed when generating the desired pulse bias voltage on the specified channel(s) during the off phase of a pulse.
The limit is specified as a positive value, but symmetric positive and negative limits are enforced simultaneously.
This attribute is applicable only if the NIDCPOWER_ATTRIBUTE_OUTPUT_FUNCTION attribute is set to NIDCPOWER_VAL_PULSE_VOLTAGE and the NIDCPOWER_ATTRIBUTE_COMPLIANCE_LIMIT_SYMMETRY attribute is set to NIDCPOWER_VAL_SYMMETRIC.
| ! | Note The channel must be enabled for the specified current limit to take effect. Refer to the NIDCPOWER_ATTRIBUTE_OUTPUT_ENABLED attribute for more information about enabling the output channel. |
|---|
| !Note | Note This attribute is not supported by all devices. Refer to Supported Attributes by Device for information about supported devices. |
|---|---|
| Valid Values: The valid values for this attribute are defined by the values you specify for the NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_RANGE property. |
| Numeric Value | Data type |
Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150195 | ViReal64 | R/W | Channel | None | None |
Specifies the maximum current, in amps, that the output can produce when generating the desired pulse voltage on the specified channel(s) during the off phase of a pulse.
This attribute is applicable only if the NIDCPOWER_ATTRIBUTE_COMPLIANCE_LIMIT_SYMMETRY attribute is set to NIDCPOWER_VAL_ASYMMETRIC and the NIDCPOWER_ATTRIBUTE_OUTPUT_FUNCTION attribute is set to NIDCPOWER_VAL_PULSE_VOLTAGE.
You must also specify NIDCPOWER_ATTRIBUTE_PULSE_BIAS_CURRENT_LIMIT_LOW to complete the asymmetric range.
| !Note | Note The channel must be enabled and the output relay must be connected for the specified limit to take effect. Refer to the NIDCPOWER_ATTRIBUTE_OUTPUT_ENABLED attribute and the NIDCPOWER_ATTRIBUTE_OUTPUT_CONNECTED attribute for more information about enabling the output channel and connecting the output relay respectively. |
|---|
| !Note | Note Refer to Supported Attributes by Device for information about supported devices. |
|---|---|
| Valid Values: 1% of NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_RANGE, NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_RANGE |
- The range bounded by the limit high and limit low must include zero.
| !Note | Note The limit may be extended beyond the selected limit range if the NIDCPOWER_ATTRIBUTE_OVERRANGING_ENABLED attribute is set to VI_TRUE. |
|---|---|
| Default Value: Refer to Supported Attributes by Device for the default value by device. |
Related Topics:
Ranges
Changing Ranges
Overranging
| Numeric Value | Data type |
Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150196 | ViReal64 | R/W | Channel | None | None |
Specifies the minimum current, in amps, that the output can produce when generating the desired pulse voltage on the specified channel(s) during the off phase of a pulse.
This attribute is applicable only if the NIDCPOWER_ATTRIBUTE_COMPLIANCE_LIMIT_SYMMETRY attribute is set to NIDCPOWER_VAL_ASYMMETRIC and the NIDCPOWER_ATTRIBUTE_OUTPUT_FUNCTION attribute is set to NIDCPOWER_VAL_PULSE_VOLTAGE.
You must also specify NIDCPOWER_ATTRIBUTE_PULSE_BIAS_CURRENT_LIMIT_HIGH to complete the asymmetric range.
| !Note | Note The channel must be enabled and the output relay must be connected for the specified limit to take effect. Refer to the NIDCPOWER_ATTRIBUTE_OUTPUT_ENABLED attribute and the NIDCPOWER_ATTRIBUTE_OUTPUT_CONNECTED attribute for more information about enabling the output channel and connecting the output relay respectively. |
|---|
| !Note | Note Refer to Supported Attributes by Device for information about supported devices. |
|---|---|
| Valid Values: -NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_RANGE, -1% of NIDCPOWER_ATTRIBUTE_PULSE_CURRENT_LIMIT_RANGE |
- The range bounded by the limit high and limit low must include zero.
| !Note | Note The limit may be extended beyond the selected limit range if the NIDCPOWER_ATTRIBUTE_OVERRANGING_ENABLED attribute is set to VI_TRUE. |
|---|---|
| Default Value: Refer to Supported Attributes by Device for the default value by device. |
Related Topics:
Ranges
Changing Ranges
Overranging
| Numeric Value | Data type |
Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150085 | ViReal64 | R/W | Channel | None | niDCPower_ConfigurePulseCurrentLimitRange |
Specifies the pulse current limit range, in amps, for the specified channel(s).
The range defines the valid values to which you can set the pulse current limit and pulse bias current limit.
This attribute is applicable only if the NIDCPOWER_ATTRIBUTE_OUTPUT_FUNCTION attribute is set to NIDCPOWER_VAL_PULSE_VOLTAGE.
| ! | Note The channel must be enabled for the specified current limit to take effect. Refer to the NIDCPOWER_ATTRIBUTE_OUTPUT_ENABLED attribute for more information about enabling the output channel. |
|---|
| !Note | Note This attribute is not supported by all devices. Refer to Supported Attributes by Device for information about supported devices. |
|---|---|
| For valid ranges, refer to the ranges topic for your device in the NI DC Power Supplies and SMUs Help. |
Creating and Setting Up a gRPC Server
Session Utilities API Reference
gRPC API Differences From C API
Sharing Driver Sessions Between Clients
C API Docs
NI-DAQmx
- gRPC API Differences From C API
- Task Configuration And Control
- Channel Configuration And Creation
- Timing
- Triggering
- Read Functions
- Write Functions
- Export Hardware Signals
- Scale Configuration
- Internal Buffer Configuration
- Advanced Functions
- System Configuration
- Error Handling
- Buffer Attributes
- Calibration Info Attributes
- Channel Attributes
- Device Attributes
- Export Signal Attributes
- Persisted Channel Attributes
- Persisted Scale Attributes
- Persisted Task Attributes
- Physical Channel Attributes
- Read Attributes
- Scale Attributes
- System Attributes
- Task Attributes
- Timing Attributes
- Trigger Attributes
- Watchdog Attributes
- Write Attributes
NI-DCPOWER
- Setup Functions
- Configure Functions
- Measurement Functions
- Control Functions
- Trigger And Event
- Attribute Functions
- Query Functions
- Calibration Functions
- Utility Functions
- Supported Device
- Source Attributes
- Transient Attributes
- Voltage Attributes
- Current Attributes
- Pulse Voltage Attributes
- Pulse Current Attributes
- Cutoff Attributes
- Measurement Attributes
- Trigger Attributes Functions
- Event Attributes
- Advanced Attributes
- Inherent Ivi Attributes
- Supported Device Attributes
NI-DIGITAL PATTERN DRIVER
- Init And Close Functions
- Session Locking Functions
- Utility Functions
- Error Handling Functions
- Calibration Functions
- Attributes Functions
- Pin Map Functions
- Low Level Functions
- Low Level Action Functions
- Pin Control Functions
- Static IO Functions
- Clock Generator Functions
- Levels And Timing Functions
- TDR Functions
- PPMU Configuration Functions
- DC Voltage Functions
- DC Current Functions
- PPMU Action Functions
- Pattern Configuration Functions
- Pattern Action Functions
- History Ram Functions
- Source Memory Functions
- Capture Memory Functions
- Triggers And Events Functions
- Conditional Jump Trigger Functions
- Sequencer Flag Functions
- Sequencer Register Functions
- Match Fail Combination Functions
- Pattern Results Functions
- Sort Results Functions
- Frequency Measurement Functions
- IVI Inherent Attributes
- Specific Driver Information Attributes, Read Only
- Driver Setup Information Attributes
- Device Attributes
- Pin Control Attributes
- Level Configuration Attributes
- Trigger Configuration Attributes
- PPMU Attributes
- Patterns Attributes
- Pattern Opcode Event Attributes
- Timing Offset Attributes
- Keep Alive Attributes
- Frequency Measurement Attributes
- Clock Generator Attributes
- History RAM
- Synchronization Attributes
- TDR Endpoint Termination Attributes
NI-FGEN
- Setup Functions
- Configuration Functions
- Standard Output Functions
- Arbitrary Waveform Output Functions
- Arbitrary Sequence Output Functions
- Incremental Waveform Write Functions
- Configure Clock Functions
- Trigger And Syncronizations Functions
- 5404 Routing Functions
- Script Output Functions
- Configure Onboard Signal Processing Functions
- Configure Peer To Peer Functions
- Attribute Functions
- Waveform Control Functions
- Error Functions
- Output Attributes
- Arbitrary Waveform Attributes
- Data Transfer Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Attributes
- Standard Function Attributes
- Clock Attributes
- Event Attributes
- Triggering Attributes
- Instrument Specific Attributes
- Inherent IVI Attributes
- 5401 5411 5431
NI-RFmx Bluetooth
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Packet Attributes
- Auto Detect Signal Attributes
- Modacc Attributes
- ACP Attributes
- Twenty dB Attributes
- Frequency Range Attributes
- TXP Attributes
- Advanced Attributes
NI-RFmx NR
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attributes Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Signal Detection Attributes
- Component Carrier Attributes
- List Attributes
- Modacc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- TXP Attributes
- Pvt Attributes
- Advanced Attributes
NI-RFmx LTE
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Ch Configuration Functions
- NB IoT Configuration Functions
- ModAcc Configuration Functions
- ACP Configuration Functions
- CHP Configuration Functions
- OBW Configuration Functions
- SEM Configuration Functions
- PVT Configuration Functions
- SlotPhase Configuration Functions
- SlotPower Configuration Functions
- Set And Get Attribute Functions
- ModAcc Fetch Functions
- ACP Fetch Functions
- CHP Fetch Functions
- OBW Fetch Functions
- SEM Fetch Functions
- PVT Fetch Functions
- SlotPhase Fetch Functions
- SlotPower Fetch Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Component Carrier Attributes
- ModAcc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- PVT Attributes
- SlotPhase Attributes
- SlotPower Attributes
- Advanced Attributes
NI-RFmx SpecAn
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Read Functions
- Fetch Functions
- Utility Functions
- Marker Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- ACP Attributes
- Cdf Attributes
- CHP Attributes
- Fcnt Attributes
- Harm Attributes
- OBW Attributes
- SEM Attributes
- Spectrum Attributes
- Spur Attributes
- TXP Attributes
- AMPM Attributes
- Dpd Attributes
- IQ Attributes
- IM Attributes
- NF Attributes
- Phasenoise Attributes
- PAVT Attributes
- Advanced Attributes
NI-RFmx WLAN
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch DSSS ModAcc Functions
- Fetch OFDM ModAcc Functions
- Fetch SEM Functions
- Fetch TXP Functions
- Fetch PowerRamp Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- OFDM Attributes
- Auto Detect Signal Attributes
- DSSS ModAcc Attributes
- OFDM ModAcc Attributes
- SEM Attributes
- TXP Attributes
- PowerRamp Attributes
- Advanced Attributes
NI-RFSA
- General Functions
- Configuration Functions
- Acquisition Functions
- Utility Functions
- Calibration Functions
- General Attributes
- Vertical Attributes
- Signal Path Attributes
- Acquisition Attributes
- Acquisition Attributes
- Triggers Attributes
- Events Attributes
- Device Characteristics Attributes
- Peer To Peer Streaming Attributes
- Configuration List Attributes
- Inherent IVI Properties Attributes
- De-embedding Attributes
- Self Calibration Attributes
- Factory Calibration Attributes
- External Alignment Attributes
- Device Specific Attributes
NI-RFSG
- General Functions
- Generation Configuration
- Utility Functions
- Calibration Functions
- Arb Attributes
- Clock Attributes
- Configuration List Attributes
- De-embedding Attributes
- Device Characteristics Attributes
- Device Specific Attributes
- Events Attributes
- External Calibration Attributes
- Inherent IVI Attributes Attributes
- IQ Impairment Attributes
- Load Configurations Attributes
- Modulation Attributes
- Obsolete Attributes
- Peer To Peer Attributes
- RF Attributes
- Self Calibration Attributes
- Triggers Attributes
NI-SCOPE
- Setup Functions
- Configure Functions
- Attribute Functions
- Acquisition Functions
- Measurement Functions
- Calibrate Functions
- Utility Funcitons
- Error Handling Functions
- IVI Compliance Or Obsolete Functions
- Vertical Attributes
- Horizontal Attributes
- Trigger Attributes
- Clocking Attributes
- Synchronization Attributes
- Acquisition Attributes
- Waveform Measurements Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Streaming Attributes
- Device Attributes
- IVI Or Obsolete Attributes
- Instrument Capabilities Attributes
- If Digitizer Attributes
NI-XNET
- gRPC API differences from C APIs
- General Functions
- Cluster Properties
- Database Properties
- Device Properties
- ECU Properties
- Frame Properties
- Interface Properties
- LIN Schedule Entry Properties
- LIN Schedule Properties
- PDU Properties
- Session Ethernet Properties
- Session Frame Properties
- Session Interface Properties
- Session Properties
- Session SAE J1939 Properties
- Signal Properties
- Subframe Properties
- System Properties
- IP-Stack Functions
- Socket Options
- Socket Functions