-
Notifications
You must be signed in to change notification settings - Fork 52
NI RFmx SpecAn Build String Functions
Alex Starche edited this page Feb 28, 2022
·
4 revisions
- RFmxSpecAn_BuildSignalString
- RFmxSpecAn_BuildRangeString2
- RFmxSpecAn_BuildSpurString2
- RFmxSpecAn_BuildOffsetString2
- RFmxSpecAn_BuildMarkerString2
- RFmxSpecAn_BuildHarmonicString2
- RFmxSpecAn_BuildCarrierString2
- RFmxSpecAn_BuildIntermodString
- RFmxSpecAn_BuildSegmentString
int32 __stdcall RFmxSpecAn_BuildSignalString (char signalName[], char resultName[], int32 selectorStringLength, char selectorString[]);
Creates the selector string for use with Configuration or Fetch attributes and functions. You must provide a char array to serve as a buffer for the value. Pass the number of bytes in the buffer as the selectorStringLength parameter.
If you want to call this function just to get the required buffer size, you must pass 0 for selectorStringLength and NULL for the selectorString buffer.
| Input | ||
|---|---|---|
| Name | Type | Description |
| signalName | char[] | Specifies the signal name for building the selector string. This input accepts the signal name with or without the "signal::" prefix. Example: "" "signal::sig1" "sig1" |
| resultName | char[] | Specifies the name to be associated with measurement results. Provide a unique name, such as "r1" to enable fetching of multiple measurement results and traces. This input accepts the result name with or without the "result::" prefix. Example: "" "result::r1" "r1" |
| selectorStringLength | int32 | Specifies the length of the selector string. Set this parameter to 0 to get the minimum buffer size required to build the selector string. |
| Output | ||
| Name | Type | Description |
| selectorString | char[] | Returns the selector string created by this function. You can pass NULL for this parameter if selectorStringLength is set to 0, which will return the minimum buffer size required to create the signal string. If the selectorString buffer is not large enough to build the signal string, the function returns an error. |
| Name | Type | Description |
|---|---|---|
| statusOrRequiredSize | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. When the statusOrRequiredSize return value returns the buffer size, the status code is not returned. To obtain a text description of the status code and additional information about the error condition, call the RFmxSpecAn_GetError) function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
int32 __stdcall RFmxSpecAn_BuildRangeString2 ( char selectorString[], int32 rangeNumber, int32 selectorStringOutLength, char selectorStringOut[]);
Creates selector string for use with spurious emissions (Spur) configuration or fetch attributes and functions. You must provide a char array to serve as a buffer for the value. Pass the number of bytes in the buffer as the selectorStringOutLength parameter.
If you want to call this function just to get the required buffer size, you must pass 0 for selectorStringOutLength and NULL for the selectorStringOut buffer.
| Input | ||
|---|---|---|
| Name | Type | Description |
| selectorString | char[] | Comprises the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. Example: "" "signal::sig1" "result::r1" "signal::sig1/result::r1" You can use the RFmxSpecAn_BuildSignalString) function to build the selector string). |
| rangeNumber | int32 | Specifies the range number for building the selector string. |
| selectorStringOutLength | int32 | Specifies the length of the string that is returned by the selectorStringOut parameter. To get the minimum buffer size required to build the selector string, set the selectorStringOutLength parameter to 0. |
| Output | ||
| Name | Type | Description |
| selectorStringOut | char[] | Returns the selector string created by this function. |
| Name | Type | Description |
|---|---|---|
| statusOrRequiredSize | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. When the statusOrRequiredSize return value returns the buffer size, the status code is not returned. To obtain a text description of the status code and additional information about the error condition, call the RFmxSpecAn_GetError) function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
int32 __stdcall RFmxSpecAn_BuildSpurString2 (char selectorString[], int32 spurNumber, int32 selectorStringOutLength, char selectorStringOut[]);
Creates the selector string to use with the spurious emissions (Spur) measurement results or fetch functions. You must provide a char array to serve as a buffer for the value. Pass the number of bytes in the buffer as the selectorStringOutLength parameter.
If you want to call this function just to get the required buffer size, you must pass 0 for selectorStringOutLength and NULL for the selectorStringOut buffer.
| Input | ||
|---|---|---|
| Name | Type | Description |
| selectorString | char[] | Comprises the signal name, result name, and range number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. You can also pass the selectorStringOut parameter of the RFmxSpecAn_BuildRangeString2) function as an input to this function. The default value is "range0" (empty string). Example: "range0" "signal::sig1/range0" "result::r1/range0" "signal::sig1/result::r1/range0" You can use the RFmxSpecAn_BuildSignalString) function to build the selector string). |
| spurNumber | int32 | Specifies the spur number for building the selector string. |
| selectorStringOutLength | int32 | Specifies the length of the string that is returned by the selectorStringOut parameter. To get the minimum buffer size required to build the selector string, set the selectorStringOutLength parameter to 0. |
| Output | ||
| Name | Type | Description |
| selectorStringOut | char[] | Returns the selector string created by this function. |
| Name | Type | Description |
|---|---|---|
| statusOrRequiredSize | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. When the statusOrRequiredSize return value returns the buffer size, the status code is not returned. To obtain a text description of the status code and additional information about the error condition, call the RFmxSpecAn_GetError) function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
int32 __stdcall RFmxSpecAn_BuildOffsetString2( char selectorString[], int32 offsetNumber, int32 selectorStringOutLength, char selectorStringOut[] );
Creates the selector string to use with SEM and ACP offset configuration or fetch attributes and functions. You must provide a char array to serve as a buffer for the value. Pass the number of bytes in the buffer as the selectorStringOutLength parameter.
If you want to call this function just to get the required buffer size, you must pass 0 for selectorStringOutLength and NULL for the selectorStringOut buffer.
| Input | ||
|---|---|---|
| Name | Type | Description |
| selectorString | char[] | Comprises the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. Example: "" "signal::sig1" "result::r1" "signal::sig1/result::r1" You can use the RFmxSpecAn_BuildSignalString) function to build the selector string). |
| offsetNumber | int32 | Specifies the offset number for building the selector string. |
| selectorStringOutLength | int32 | Specifies the length of the string that is returned by the selectorStringOut parameter. To get the minimum buffer size required to build the selector string, set the selectorStringOutLength parameter to 0. |
| Output | ||
| Name | Type | Description |
| selectorStringOut | char[] | Returns the selector string created by this function. |
| Name | Type | Description |
|---|---|---|
| statusOrRequiredSize | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. When the statusOrRequiredSize return value returns the buffer size, the status code is not returned. To obtain a text description of the status code and additional information about the error condition, call the RFmxSpecAn_GetError) function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
int32 __stdcall RFmxSpecAn_BuildMarkerString2 (char selectorString[], int32 markerNumber, int32 selectorStringOutLength, char selectorStringOut[]);
Creates the selector string to use with marker configuration or fetch attributes and functions. You must provide a char array to serve as a buffer for the value. Pass the number of bytes in the buffer as the selectorStringOutLength parameter.
If you want to call this function just to get the required buffer size, you must pass 0 for selectorStringOutLength and NULL for the selectorStringOut buffer.
| Input | ||
|---|---|---|
| Name | Type | Description |
| selectorString | char[] | Comprises the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. Example: "" "signal::sig1" "result::r1" "signal::sig1/result::r1" You can use the RFmxSpecAn_BuildSignalString) function to build the selector string). |
| markerNumber | int32 | Specifies the marker number for building the selector string. |
| selectorStringOutLength | int32 | Specifies the length of the string that is returned by the selectorStringOut parameter. To get the minimum buffer size required to build the selector string, set the selectorStringOutLength parameter to 0. |
| Output | ||
| Name | Type | Description |
| selectorStringOut | char[] | Returns the selector string created by this function. |
| Name | Type | Description |
|---|---|---|
| statusOrRequiredSize | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. When the statusOrRequiredSize return value returns the buffer size, the status code is not returned. To obtain a text description of the status code and additional information about the error condition, call the RFmxSpecAn_GetError) function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
int32 __stdcall RFmxSpecAn_BuildHarmonicString2 (char selectorString[], int32 harmonicNumber, int32 selectorStringOutLength, char selectorStringOut[]);
Creates the selector string to use with Harmonics configuration or fetch attributes and functions. You must provide a char array to serve as a buffer for the value. Pass the number of bytes in the buffer as the selectorStringOutLength parameter.
If you want to call this function just to get the required buffer size, you must pass 0 for selectorStringOutLength and NULL for the selectorStringOut buffer.
| Input | ||
|---|---|---|
| Name | Type | Description |
| selectorString | char[] | Comprises the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. Example: "" "signal::sig1" "result::r1" "signal::sig1/result::r1" You can use the RFmxSpecAn_BuildSignalString) function to build the selector string). |
| harmonicNumber | int32 | Specifies the harmonic number for building the selector string. |
| selectorStringOutLength | int32 | Specifies the length of the string that is returned by the selectorStringOut parameter. To get the minimum buffer size required to build the selector string, set the selectorStringOutLength parameter to 0. |
| Output | ||
| Name | Type | Description |
| selectorStringOut | char[] | Returns the selector string created by this function. |
| Name | Type | Description |
|---|---|---|
| statusOrRequiredSize | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. When the statusOrRequiredSize return value returns the buffer size, the status code is not returned. To obtain a text description of the status code and additional information about the error condition, call the RFmxSpecAn_GetError) function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
int32 __stdcall RFmxSpecAn_BuildCarrierString2 (char selectorString[], int32 carrierNumber, int32 selectorStringOutLength, char selectorStringOut[]);
Creates the selector string to use with the SEM, ACP, and CHP carrier configuration or fetch attributes and functions. You must provide a char array to serve as a buffer for the value. Pass the number of bytes in the buffer as the selectorStringOutLength parameter.
If you want to call this function just to get the required buffer size, you must pass 0 for selectorStringOutLength and NULL for the selectorStringOut buffer.
| Input | ||
|---|---|---|
| Name | Type | Description |
| selectorString | char[] | Comprises the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. Example: "" "signal::sig1" "result::r1" "signal::sig1/result::r1" You can use the RFmxSpecAn_BuildSignalString) function to build the selector string). |
| carrierNumber | int32 | Specifies the carrier number for building the selector string. |
| selectorStringOutLength | int32 | Specifies the length of the string that is returned by the selectorStringOut parameter. To get the minimum buffer size required to build the selector string, set the selectorStringOutLength parameter to 0. |
| Output | ||
| Name | Type | Description |
| selectorStringOut | char[] | Returns the selector string created by this function. |
| Name | Type | Description |
|---|---|---|
| statusOrRequiredSize | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. When the statusOrRequiredSize return value returns the buffer size, the status code is not returned. To obtain a text description of the status code and additional information about the error condition, call the RFmxSpecAn_GetError) function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
int32 __stdcall RFmxSpecAn_BuildIntermodString (char selectorString[], int32 intermodNumber, int32 selectorStringOutLength, char selectorStringOut[]);
Creates the intermod string to use as the selector string with the IM configuration or fetch attributes and functions.
| Input | ||
|---|---|---|
| Name | Type | Description |
| selectorString | char[] | Comprises the signal name. If you do not specify the signal name, the default signal instance is used. Example: "" "signal::sig1" You can use the RFmxSpecAn_BuildSignalString) function to build the selector string). |
| intermodNumber | int32 | Specifies the intermod number for building the selector string. |
| selectorStringOutLength | int32 | Specifies the length of the string that is returned by the selectorStringOut parameter. To get the minimum buffer size required to build the selector string, set the selectorStringOutLength parameter to 0. |
| selectorStringOut | char[] | Returns the selector string created by this function. |
| Name | Type | Description |
|---|---|---|
| statusOrRequiredSize | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. When the statusOrRequiredSize return value returns the buffer size, the status code is not returned. To obtain a text description of the status code and additional information about the error condition, call the RFmxSpecAn_GetError) function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
int32 __stdcall RFmxSpecAn_BuildSegmentString (char selectorString[], int32 segmentNumber, int32 selectorStringOutLength, char selectorStringOut[]);
Creates a selector string for use with the PAVT configuration or fetch attributes and functions.
| Input | ||
|---|---|---|
| Name | Type | Description |
| selectorString | char[] | Comprises the signal name. If you do not specify the signal name, the default signal instance is used. Example: "" "signal::sig1" You can use the RFmxSpecAn_BuildSignalString) function to build the selector string). |
| segmentNumber | int32 | Specifies the segment number for building the selector string. |
| selectorStringOutLength | int32 | Specifies the length of the string that is returned by the selectorStringOut parameter. To get the minimum buffer size required to build the selector string, set the selectorStringOutLength parameter to 0. |
| Output | ||
| Name | Type | Description |
| selectorStringOut | char[] | Returns the selector string created by this function. |
| Name | Type | Description |
|---|---|---|
| statusOrRequiredSize | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. When the statusOrRequiredSize return value returns the buffer size, the status code is not returned. To obtain a text description of the status code and additional information about the error condition, call the RFmxSpecAn_GetError) function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
Creating and Setting Up a gRPC Server
Session Utilities API Reference
gRPC API Differences From C API
Sharing Driver Sessions Between Clients
C API Docs
NI-DAQmx
- gRPC API Differences From C API
- Task Configuration And Control
- Channel Configuration And Creation
- Timing
- Triggering
- Read Functions
- Write Functions
- Export Hardware Signals
- Scale Configuration
- Internal Buffer Configuration
- Advanced Functions
- System Configuration
- Error Handling
- Buffer Attributes
- Calibration Info Attributes
- Channel Attributes
- Device Attributes
- Export Signal Attributes
- Persisted Channel Attributes
- Persisted Scale Attributes
- Persisted Task Attributes
- Physical Channel Attributes
- Read Attributes
- Scale Attributes
- System Attributes
- Task Attributes
- Timing Attributes
- Trigger Attributes
- Watchdog Attributes
- Write Attributes
NI-DCPOWER
- Setup Functions
- Configure Functions
- Measurement Functions
- Control Functions
- Trigger And Event
- Attribute Functions
- Query Functions
- Calibration Functions
- Utility Functions
- Supported Device
- Source Attributes
- Transient Attributes
- Voltage Attributes
- Current Attributes
- Pulse Voltage Attributes
- Pulse Current Attributes
- Cutoff Attributes
- Measurement Attributes
- Trigger Attributes Functions
- Event Attributes
- Advanced Attributes
- Inherent Ivi Attributes
- Supported Device Attributes
NI-DIGITAL PATTERN DRIVER
- Init And Close Functions
- Session Locking Functions
- Utility Functions
- Error Handling Functions
- Calibration Functions
- Attributes Functions
- Pin Map Functions
- Low Level Functions
- Low Level Action Functions
- Pin Control Functions
- Static IO Functions
- Clock Generator Functions
- Levels And Timing Functions
- TDR Functions
- PPMU Configuration Functions
- DC Voltage Functions
- DC Current Functions
- PPMU Action Functions
- Pattern Configuration Functions
- Pattern Action Functions
- History Ram Functions
- Source Memory Functions
- Capture Memory Functions
- Triggers And Events Functions
- Conditional Jump Trigger Functions
- Sequencer Flag Functions
- Sequencer Register Functions
- Match Fail Combination Functions
- Pattern Results Functions
- Sort Results Functions
- Frequency Measurement Functions
- IVI Inherent Attributes
- Specific Driver Information Attributes, Read Only
- Driver Setup Information Attributes
- Device Attributes
- Pin Control Attributes
- Level Configuration Attributes
- Trigger Configuration Attributes
- PPMU Attributes
- Patterns Attributes
- Pattern Opcode Event Attributes
- Timing Offset Attributes
- Keep Alive Attributes
- Frequency Measurement Attributes
- Clock Generator Attributes
- History RAM
- Synchronization Attributes
- TDR Endpoint Termination Attributes
NI-FGEN
- Setup Functions
- Configuration Functions
- Standard Output Functions
- Arbitrary Waveform Output Functions
- Arbitrary Sequence Output Functions
- Incremental Waveform Write Functions
- Configure Clock Functions
- Trigger And Syncronizations Functions
- 5404 Routing Functions
- Script Output Functions
- Configure Onboard Signal Processing Functions
- Configure Peer To Peer Functions
- Attribute Functions
- Waveform Control Functions
- Error Functions
- Output Attributes
- Arbitrary Waveform Attributes
- Data Transfer Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Attributes
- Standard Function Attributes
- Clock Attributes
- Event Attributes
- Triggering Attributes
- Instrument Specific Attributes
- Inherent IVI Attributes
- 5401 5411 5431
NI-RFmx Bluetooth
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Packet Attributes
- Auto Detect Signal Attributes
- Modacc Attributes
- ACP Attributes
- Twenty dB Attributes
- Frequency Range Attributes
- TXP Attributes
- Advanced Attributes
NI-RFmx NR
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attributes Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Signal Detection Attributes
- Component Carrier Attributes
- List Attributes
- Modacc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- TXP Attributes
- Pvt Attributes
- Advanced Attributes
NI-RFmx LTE
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Ch Configuration Functions
- NB IoT Configuration Functions
- ModAcc Configuration Functions
- ACP Configuration Functions
- CHP Configuration Functions
- OBW Configuration Functions
- SEM Configuration Functions
- PVT Configuration Functions
- SlotPhase Configuration Functions
- SlotPower Configuration Functions
- Set And Get Attribute Functions
- ModAcc Fetch Functions
- ACP Fetch Functions
- CHP Fetch Functions
- OBW Fetch Functions
- SEM Fetch Functions
- PVT Fetch Functions
- SlotPhase Fetch Functions
- SlotPower Fetch Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Component Carrier Attributes
- ModAcc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- PVT Attributes
- SlotPhase Attributes
- SlotPower Attributes
- Advanced Attributes
NI-RFmx SpecAn
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Read Functions
- Fetch Functions
- Utility Functions
- Marker Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- ACP Attributes
- Cdf Attributes
- CHP Attributes
- Fcnt Attributes
- Harm Attributes
- OBW Attributes
- SEM Attributes
- Spectrum Attributes
- Spur Attributes
- TXP Attributes
- AMPM Attributes
- Dpd Attributes
- IQ Attributes
- IM Attributes
- NF Attributes
- Phasenoise Attributes
- PAVT Attributes
- Advanced Attributes
NI-RFmx WLAN
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch DSSS ModAcc Functions
- Fetch OFDM ModAcc Functions
- Fetch SEM Functions
- Fetch TXP Functions
- Fetch PowerRamp Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- OFDM Attributes
- Auto Detect Signal Attributes
- DSSS ModAcc Attributes
- OFDM ModAcc Attributes
- SEM Attributes
- TXP Attributes
- PowerRamp Attributes
- Advanced Attributes
NI-RFSA
- General Functions
- Configuration Functions
- Acquisition Functions
- Utility Functions
- Calibration Functions
- General Attributes
- Vertical Attributes
- Signal Path Attributes
- Acquisition Attributes
- Acquisition Attributes
- Triggers Attributes
- Events Attributes
- Device Characteristics Attributes
- Peer To Peer Streaming Attributes
- Configuration List Attributes
- Inherent IVI Properties Attributes
- De-embedding Attributes
- Self Calibration Attributes
- Factory Calibration Attributes
- External Alignment Attributes
- Device Specific Attributes
NI-RFSG
- General Functions
- Generation Configuration
- Utility Functions
- Calibration Functions
- Arb Attributes
- Clock Attributes
- Configuration List Attributes
- De-embedding Attributes
- Device Characteristics Attributes
- Device Specific Attributes
- Events Attributes
- External Calibration Attributes
- Inherent IVI Attributes Attributes
- IQ Impairment Attributes
- Load Configurations Attributes
- Modulation Attributes
- Obsolete Attributes
- Peer To Peer Attributes
- RF Attributes
- Self Calibration Attributes
- Triggers Attributes
NI-SCOPE
- Setup Functions
- Configure Functions
- Attribute Functions
- Acquisition Functions
- Measurement Functions
- Calibrate Functions
- Utility Funcitons
- Error Handling Functions
- IVI Compliance Or Obsolete Functions
- Vertical Attributes
- Horizontal Attributes
- Trigger Attributes
- Clocking Attributes
- Synchronization Attributes
- Acquisition Attributes
- Waveform Measurements Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Streaming Attributes
- Device Attributes
- IVI Or Obsolete Attributes
- Instrument Capabilities Attributes
- If Digitizer Attributes
NI-XNET
- gRPC API differences from C APIs
- General Functions
- Cluster Properties
- Database Properties
- Device Properties
- ECU Properties
- Frame Properties
- Interface Properties
- LIN Schedule Entry Properties
- LIN Schedule Properties
- PDU Properties
- Session Ethernet Properties
- Session Frame Properties
- Session Interface Properties
- Session Properties
- Session SAE J1939 Properties
- Signal Properties
- Subframe Properties
- System Properties
- IP-Stack Functions
- Socket Options
- Socket Functions