Remove copy-to-tmp option

doc/sphinx_source/modules/mod/transfer.rst

@@ -1,4 +1,4 @@
-Last revised: January 1, 2002
+Last revised: November 29, 2023
 
 .. _transfer:
 
@@ -27,13 +27,6 @@ There are also some variables you can set in your config file:
     but admits that may be too small. 1024 is standard these days.
     Set this to 0 to use turbo-dcc (recommended).
 
-  set copy-to-tmp 1
-    Enable this setting if you want to copy files to a temporary location
-    before sending or receiving them. This might be useful for file
-    stability, but if your directories are NFS mounted, it's a pain.
-    Setting this to 1 is not advised for big files or if you're low on
-    disk space.
-
   set xfer-timeout 30
     Set here the time (in seconds) to wait before an inactive transfer
     times out.

doc/sphinx_source/using/tcl-commands.rst

@@ -1,7 +1,7 @@
 .. highlight:: text
 
 Eggdrop Tcl Commands
-Last revised: January 24, 2021
+Last revised: January 6, 2024
 
 ====================
 Eggdrop Tcl Commands
@@ -2011,8 +2011,7 @@ dccsend <filename> <ircnick>
   | 4     | the file was queued for later transfer, which means that person has |
   |       | too many file transfers going right now                             |
   +-------+---------------------------------------------------------------------+
-  | 5     | copy-to-tmp is enabled and the file already exists in the temp      |
-  |       | directory                                                           |
+  | 5     | the file could not be opened or temporary file could not be created |
   +-------+---------------------------------------------------------------------+
 
   Module: transfer

eggdrop.conf

@@ -1445,12 +1445,6 @@ set max-dloads 3
 # 0 is turbo-dcc (recommended).
 set dcc-block 0
 
-# Enable this setting if you want to copy files to a temporary location before
-# sending or receiving them. This might be useful for file stability, but if
-# your directories are NFS mounted, it's a pain. Setting this to 1 is not
-# advised for big files or if you're low on disk space.
-set copy-to-tmp 1
-
 # Set here the time (in seconds) to wait before an inactive transfer times out.
 set xfer-timeout 30
 

src/dccutil.c

@@ -33,7 +33,7 @@
 #include "tandem.h"
 
 extern struct dcc_t *dcc;
-extern int dcc_total, dcc_flood_thr, backgrd, copy_to_tmp, max_socks;
+extern int dcc_total, dcc_flood_thr, backgrd, max_socks;
 extern char botnetnick[], version[];
 extern time_t now;
 extern sock_list *socklist;
@@ -318,7 +318,7 @@ void killtransfer(int n)
       fclose(dcc[n].u.xfer->f);
       dcc[n].u.xfer->f = NULL;
     }
-    if (dcc[n].u.xfer->filename && copy_to_tmp) {
+    if (dcc[n].u.xfer->filename) {
       for (i = 0; i < dcc_total; i++) {
         if ((i != n) && (dcc[i].type->flags & DCT_FILETRAN) &&
             (dcc[i].u.xfer->filename) &&

src/mod/filesys.mod/filesys.c

@@ -791,6 +791,7 @@ static void filesys_dcc_send_hostresolved(int i)
     /* Put uploads in a temp file first */
     dcc[i].u.xfer->f = tmpfile();
     if (dcc[i].u.xfer->f == NULL) {
+      debug1("filesys: filesys_dcc_send_hostresolved(): tmpfile(): error: %s", strerror(errno));
       dprintf(DP_HELP,
               "NOTICE %s :Can't create file `%s' (temp dir error)\n",
               dcc[i].nick, dcc[i].u.xfer->origname);

src/mod/share.mod/share.c

@@ -24,6 +24,7 @@
 #define MODULE_NAME "share"
 #define MAKING_SHARE
 
+#include <errno.h>
 #include "src/mod/module.h"
 
 #include <netinet/in.h>
@@ -1242,12 +1243,10 @@ static void share_ufsend(int idx, char *par)
     putlog(LOG_MISC, "*", "NO MORE DCC CONNECTIONS -- can't grab userfile");
     dprintf(idx, "s e I can't open a DCC to you; I'm full.\n");
     zapfbot(idx);
-  } else if (copy_to_tmp && !(f = tmpfile())) {
+  } else if (!(f = tmpfile())) {
+    debug1("share: share_ufsend(): tmpfile(): error: %s", strerror(errno));
     putlog(LOG_MISC, "*", "CAN'T WRITE TEMPORARY USERFILE DOWNLOAD FILE!");
     zapfbot(idx);
-  } else if (!copy_to_tmp && !(f = fopen(s, "wb"))) {
-    putlog(LOG_MISC, "*", "CAN'T WRITE USERFILE DOWNLOAD FILE!");
-    zapfbot(idx);
   } else {
     /* Ignore longip and use botaddr, arg kept for backward compat for pre 1.8.3 */
     newsplit(&par);
@@ -2353,7 +2352,7 @@ char *share_start(Function *global_funcs)
 
   global = global_funcs;
 
-  module_register(MODULE_NAME, share_table, 2, 4);
+  module_register(MODULE_NAME, share_table, 2, 5);
   if (!module_depend(MODULE_NAME, "eggdrop", 108, 0)) {
     module_undepend(MODULE_NAME);
     return "This module requires Eggdrop 1.8.0 or later.";

src/mod/transfer.mod/help/set/transfer.help

@@ -16,13 +16,6 @@
    mode, the bot will dump transfers as fast as possible, only
    stopping to count acks after it's finished.  This can dramatically
    improve the speed of file transfers, and is recommended.
-%{help=set copy-to-tmp}%{+n}
-###  %bset copy-to-tmp%b <0/1>
-   Enable this setting if you want to copy files to a temporary location
-   before sending or receiving them. This might be useful for file
-   stability, but if your directories are NFS mounted, it's a pain.
-   Setting this to 1 is not advised for big files or if you're low on
-   disk space.
 %{help=set xfer-timeout}%{+n}
 ###  %bset xfer-timeout%b <#>
    This is the number of seconds to wait before a dcc send or get is

src/mod/transfer.mod/help/transfer.help

@@ -4,6 +4,6 @@
    support for userfile sharing.
 
    Config file variables for configuring the transfer module:
-      %bxfer-timeout    copy-to-tmp         dcc-block%b
-      %bmax-dloads      sharefail-unlink%b
+      %bxfer-timeout    dcc-block           max-dloads%b
+      %bsharefail-unlink%b
    (Use %b'.help set <variable>'%b for more info)

src/mod/transfer.mod/transfer.c

@@ -291,7 +291,7 @@ static void eof_dcc_send(int idx)
                   + strlen(dcc[idx].u.xfer->origname) + 1);
     sprintf(nfn, "%s%s", dcc[idx].u.xfer->dir, dcc[idx].u.xfer->origname);
 
-    if (copy_to_tmp && (l = fcopyfile(dcc[idx].u.xfer->f, nfn))) {
+    if ((l = fcopyfile(dcc[idx].u.xfer->f, nfn))) {
       putlog(LOG_MISC | LOG_FILES, "*", TRANSFER_FAILED_MOVE, nfn);
     }
     /* Only close now in case it was a tmpfile, as it's deleted upon close */
@@ -302,8 +302,8 @@ static void eof_dcc_send(int idx)
     u = get_user_by_host(s);
     hand = u ? u->handle : "*";
 
-    /* Add to file database if not tmpfile or if copyfile succeeded */
-    if (!copy_to_tmp || !l) {
+    /* Add to file database if copyfile succeeded */
+    if (!l) {
       module_entry *fs = module_find("filesys", 0, 0);
 
       if (fs != NULL) {
@@ -961,8 +961,10 @@ static int raw_dcc_resend_send(char *filename, char *nick, char *from,
 
   zz = -1;
   f = fopen(filename, "r");
-  if (!f)
+  if (!f) {
+    debug2("transfer: raw_dcc_resend_send(): fopen(%s): error: %s", filename, strerror(errno));
     return DCCSEND_BADFN;
+  }
   fseeko(f, 0, SEEK_END);
   dccfilesize = ftello(f);
   fclose(f);
@@ -988,19 +990,15 @@ static int raw_dcc_resend_send(char *filename, char *nick, char *from,
   else
     nfn++;
 
-  if (copy_to_tmp) {
-    f = tmpfile();
-    if (!f)
-      return DCCSEND_BADFN;
-    if (copyfilef(filename, f)) {
-      fclose(f);
-      return DCCSEND_FCOPY;
-    }
-  } else
-    f = fopen(filename, "r");
-
-  if (!f)
+  f = tmpfile();
+  if (!f) {
+    debug1("transfer: raw_dcc_resend_send(): tmpfile(): error: %s", strerror(errno));
     return DCCSEND_BADFN;
+  }
+  if (copyfilef(filename, f)) {
+    fclose(f);
+    return DCCSEND_FCOPY;
+  }
 
   if ((i = new_dcc(&DCC_GET_PENDING, sizeof(struct xfer_info))) == -1) {
     fclose(f);

src/modules.c

@@ -82,9 +82,11 @@ extern int parties, noshare, dcc_total, egg_numver, userfile_perm, ignore_time,
            must_be_owner, raw_log, max_dcc, make_userfile, default_flags,
            require_p, share_greet, use_invites, use_exempts, password_timeout,
            force_expire, protect_readonly, reserved_port_min, reserved_port_max,
-           copy_to_tmp, quiet_reject;
+           quiet_reject;
 extern volatile sig_atomic_t do_restart;
 
+int copy_to_tmp = 1; /* TODO: remove from module API for eggdrop 2.0 */
+
 #ifdef IPV6
 extern int pref_af;
 #endif

src/tcl.c

@@ -86,7 +86,6 @@ int remote_boots = 2;
 int allow_dk_cmds = 1;
 int must_be_owner = 1;
 int quiet_reject = 1;
-int copy_to_tmp = 1;
 int max_socks = 100;
 int quick_logs = 0;
 int par_telnet_flood = 1;
@@ -498,7 +497,6 @@ static tcl_ints def_tcl_ints[] = {
   {"force-expire",          &force_expire,         0},
   {"dupwait-timeout",       &dupwait_timeout,      0},
   {"userfile-perm",         &userfile_perm,        0},
-  {"copy-to-tmp",           &copy_to_tmp,          0},
   {"quiet-reject",          &quiet_reject,         0},
   {"cidr-support",          &cidr_support,         0},
   {"remove-pass",           &remove_pass,          0},

src/users.c

@@ -35,6 +35,7 @@
 #include "modules.h"
 #include "tandem.h"
 
+#include <errno.h>
 #include <netinet/in.h>
 #include <arpa/inet.h>
 
@@ -698,9 +699,10 @@ int readuserfile(char *file, struct userrec **ret)
     global_invites = NULL;
   }
   lasthand[0] = 0;
-  f = fopen(file, "r");
-  if (f == NULL)
+  if (!(f = fopen(file, "r"))) {
+    debug2("users: fopen(%s): %s", file, strerror(errno));
     return 0;
+  }
   noshare = noxtra = 1;
   /* read opening comment */
   s = buf;