v0.3.0

This release adds support for Prophesee event cameras using the OpenEB library.

spifrequires updated, spif-capable SpiNNaker SpiNN-5 board FPGA firmware. The attached bitfiles are for SpiNN-5 FPGA0, as this is the only FPGA that handles peripheral I/O.

• Bitfile spin5_spif_front_1-2-0_220323_id0.bit is intended for use on standalone SpiNN-5 boards. Connect a spif board to the bottom front SATA connector.

• Bitfile spin5_spif_back_1-2-0_220323_id0.bit is intended for use on multiboard SpiNNaker systems. Connect a spif board to the middle back SATA connector.

v0.2.0

This release adds distiller support, used in the translation of outgoing SpiNNaker packets into events.

spifrequires updated, spif-capable SpiNNaker SpiNN-5 board FPGA firmware. The attached bitfiles are for SpiNN-5 FPGA0, as this is the only FPGA that handles peripheral I/O.

• Bitfile spin5_spif_front_1-2-0_220323_id0.bit is intended for use on standalone SpiNN-5 boards. Connect a spif board to the bottom front SATA connector.

• Bitfile spin5_spif_back_1-2-0_220323_id0.bit is intended for use on multiboard SpiNNaker systems. Connect a spif board to the middle back SATA connector.

v0.1.0

This release supports SpiNNaker peripheral input and output.

spifrequires updated, spif-capable SpiNNaker SpiNN-5 board FPGA firmware. The attached bitfiles are for SpiNN-5 FPGA0, as this is the only FPGA that handles peripheral I/O.

• Bitfile spin5_spif_front_1-1-0_280122_id0.bit is intended for use on standalone SpiNN-5 boards. Connect a spif board to the bottom front SATA connector.

• Bitfile spin5_spif_back_1-1-0_280122_id0.bit is intended for use on multiboard SpiNNaker systems. Connect a spif board to the middle back SATA connector.

v0.0.1

Initial spif release that supports SpiNNaker peripheral input.

spifrequires an update to the SpiNNaker SpiNN-5 board FPGA firmware. The attached bitfiles are for SpiNN-5 FPGA0, as this is the only FPGA that handles peripheral I/O.

• Bitfile spin5_spif_front_1-1-0_280122_id0.bit is intended for use on standalone SpiNN-5 boards. Connect a spif board to the bottom front SATA connector.

• Bitfile spin5_spif_back_1-1-0_280122_id0.bit is intended for use on multiboard SpiNNaker systems. Connect a spif board to the middle back SATA connector.

The bitfiles were generated using Xilinx ISE version '14.7'.