New translations ark_v6x.md (Japanese)

PX4 · Nov 21, 2024 · 5a31e57 · 5a31e57
1 parent 160fbf6
commit 5a31e57
Showing 1 changed file with 16 additions and 14 deletions.
diff --git a/ja/flight_controller/ark_v6x.md b/ja/flight_controller/ark_v6x.md
@@ -1,16 +1,18 @@
 # ARK Electronics ARKV6X
 
 :::warning
-PX4 does not manufacture this (or any) autopilot. Contact the [manufacturer](https://arkelectron.com/contact-us/) for hardware support or compliance issues.
+PX4 does not manufacture this (or any) autopilot.
+Contact the [manufacturer](https://arkelectron.com/contact-us/) for hardware support or compliance issues.
 :::
 
-The USA-built [ARKV6X]((https://arkelectron.gitbook.io/ark-documentation/flight-controllers/arkv6x)) flight controller is based on the [FMUV6X and Pixhawk Autopilot Bus open source standards](https://github.com/pixhawk/Pixhawk-Standards).
+The USA-built [ARKV6X](\(https://arkelectron.gitbook.io/ark-documentation/flight-controllers/arkv6x\)) flight controller is based on the [FMUV6X and Pixhawk Autopilot Bus open source standards](https://github.com/pixhawk/Pixhawk-Standards).
 
-With triple synced IMUs, data averaging, voting, and filtering is possible. The Pixhawk Autopilot Bus (PAB) form factor enables the ARKV6X to be used on any [PAB-compatible carrier board](../flight_controller/pixhawk_autopilot_bus.md), such as the [ARK Pixhawk Autopilot Bus Carrier](../flight_controller/ark_pab.md).
+With triple synced IMUs, data averaging, voting, and filtering is possible.
+The Pixhawk Autopilot Bus (PAB) form factor enables the ARKV6X to be used on any [PAB-compatible carrier board](../flight_controller/pixhawk_autopilot_bus.md), such as the [ARK Pixhawk Autopilot Bus Carrier](../flight_controller/ark_pab.md).
 
 ![ARKV6X Main Photo](../../assets/flight_controller/arkv6x/ark_v6x_front.jpg)
 
-::: info
+:::info
 This flight controller is [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
 :::
 
@@ -59,16 +61,16 @@ For pinout of the ARKV6X see the [DS-10 Pixhawk Autopilot Bus Standard](https://
 
 ## Serial Port Mapping
 
-| UART   | Device     | Port          |
-| ------ | ---------- | ------------- |
-| USART1 | /dev/ttyS0 | GPS           |
-| USART2 | /dev/ttyS1 | TELEM3        |
-| USART3 | /dev/ttyS2 | Debug Console |
-| UART4  | /dev/ttyS3 | UART4 & I2C   |
-| UART5  | /dev/ttyS4 | TELEM2        |
-| USART6 | /dev/ttyS5 | PX4IO/RC      |
-| UART7  | /dev/ttyS6 | TELEM1        |
-| UART8  | /dev/ttyS7 | GPS2          |
+| UART   | Device     | Port                            |
+| ------ | ---------- | ------------------------------- |
+| USART1 | /dev/ttyS0 | GPS                             |
+| USART2 | /dev/ttyS1 | TELEM3                          |
+| USART3 | /dev/ttyS2 | Debug Console                   |
+| UART4  | /dev/ttyS3 | UART4 & I2C |
+| UART5  | /dev/ttyS4 | TELEM2                          |
+| USART6 | /dev/ttyS5 | PX4IO/RC                        |
+| UART7  | /dev/ttyS6 | TELEM1                          |
+| UART8  | /dev/ttyS7 | GPS2                            |
 
 ## Building Firmware