Support firmware extensions

bellows/config/__init__.py

@@ -18,6 +18,9 @@
     cv_boolean,
 )
 
+CONF_BELLOWS_CONFIG = "bellows_config"
+CONF_MANUAL_SOURCE_ROUTING = "manual_source_routing"
+
 CONF_USE_THREAD = "use_thread"
 CONF_EZSP_CONFIG = "ezsp_config"
 CONF_EZSP_POLICIES = "ezsp_policies"
@@ -31,6 +34,12 @@
             {vol.Optional(str): int}
         ),
         vol.Optional(CONF_USE_THREAD, default=True): cv_boolean,
+        # The above config really should belong in here
+        vol.Optional(CONF_BELLOWS_CONFIG, default={}): vol.Schema(
+            {
+                vol.Optional(CONF_MANUAL_SOURCE_ROUTING, default=False): bool,
+            }
+        ),
     }
 )
 

bellows/ezsp/__init__.py

@@ -23,7 +23,9 @@
 
 import bellows.config as conf
 from bellows.exception import EzspError, InvalidCommandError
+from bellows.ezsp import xncp
 from bellows.ezsp.config import DEFAULT_CONFIG, RuntimeConfig, ValueConfig
+from bellows.ezsp.xncp import FirmwareFeatures, FlowControlType
 import bellows.types as t
 import bellows.uart
 
@@ -62,6 +64,7 @@ def __init__(self, device_config: dict, application: Any | None = None):
         self._callbacks = {}
         self._ezsp_event = asyncio.Event()
         self._ezsp_version = v4.EZSPv4.VERSION
+        self._xncp_features = FirmwareFeatures.NONE
         self._gw = None
         self._protocol = None
         self._application = application
@@ -124,6 +127,7 @@ async def startup_reset(self) -> None:
             await self.reset()
 
         await self.version()
+        await self.get_xncp_features()
 
     async def connect(self, *, use_thread: bool = True) -> None:
         assert self._gw is None
@@ -167,13 +171,22 @@ async def version(self):
         if ver != self.ezsp_version:
             self._switch_protocol_version(ver)
             await self._command("version", desiredProtocolVersion=ver)
+
         LOGGER.debug(
-            "EZSP Stack Type: %s, Stack Version: %04x, Protocol version: %s",
+            ("EZSP Stack Type: %s" ", Stack Version: %04x" ", Protocol version: %s"),
             stack_type,
             stack_version,
             ver,
         )
 
+    async def get_xncp_features(self) -> None:
+        try:
+            self._xncp_features = await self.xncp_get_supported_firmware_features()
+        except InvalidCommandError:
+            self._xncp_features = xncp.FirmwareFeatures.NONE
+
+        LOGGER.debug("XNCP features: %s", self._xncp_features)
+
     async def disconnect(self):
         self.stop_ezsp()
         if self._gw:
@@ -308,11 +321,10 @@ async def get_board_info(
     ) -> tuple[str, str, str | None] | tuple[None, None, str | None]:
         """Return board info."""
 
-        tokens = {}
+        tokens: dict[t.EzspMfgTokenId, str | None] = {}
 
-        for token in (t.EzspMfgTokenId.MFG_STRING, t.EzspMfgTokenId.MFG_BOARD_NAME):
-            (value,) = await self.getMfgToken(tokenId=token)
-            LOGGER.debug("Read %s token: %s", token.name, value)
+        for token_id in (t.EzspMfgTokenId.MFG_STRING, t.EzspMfgTokenId.MFG_BOARD_NAME):
+            value = await self.get_mfg_token(token_id)
 
             # Tokens are fixed-length and initially filled with \xFF but also can end
             # with \x00
@@ -324,10 +336,7 @@ async def get_board_info(
             except UnicodeDecodeError:
                 result = "0x" + value.hex().upper()
 
-            if not result:
-                result = None
-
-            tokens[token] = result
+            tokens[token_id] = result or None
 
         (status, ver_info_bytes) = await self.getValue(
             valueId=t.EzspValueId.VALUE_VERSION_INFO
@@ -342,6 +351,14 @@ async def get_board_info(
             special, ver_info_bytes = t.uint8_t.deserialize(ver_info_bytes)
             version = f"{major}.{minor}.{patch}.{special} build {build}"
 
+            try:
+                build_string = await self.xncp_get_build_string()
+            except InvalidCommandError:
+                build_string = None
+
+            if build_string:
+                version = f"{version} ({build_string})"
+
         return (
             tokens[t.EzspMfgTokenId.MFG_STRING],
             tokens[t.EzspMfgTokenId.MFG_BOARD_NAME],
@@ -369,9 +386,23 @@ async def _get_nv3_restored_eui64_key(self) -> t.NV3KeyId | None:
 
         return None
 
+    async def get_mfg_token(self, token: t.EzspMfgTokenId) -> bytes:
+        (value,) = await self.getMfgToken(tokenId=token)
+        LOGGER.debug("Read manufacturing token %s: %s", token.name, value)
+
+        override_value = None
+
+        if FirmwareFeatures.MFG_TOKEN_OVERRIDES in self._xncp_features:
+            with contextlib.suppress(InvalidCommandError):
+                override_value = await self.xncp_get_mfg_token_override(token)
+
+            LOGGER.debug("XNCP override token %s: %s", token.name, override_value)
+
+        return override_value or value
+
     async def _get_mfg_custom_eui_64(self) -> t.EUI64 | None:
         """Get the custom EUI 64 manufacturing token, if it has a valid value."""
-        (data,) = await self.getMfgToken(tokenId=t.EzspMfgTokenId.MFG_CUSTOM_EUI_64)
+        data = await self.get_mfg_token(t.EzspMfgTokenId.MFG_CUSTOM_EUI_64)
 
         # Manufacturing tokens do not exist in RCP firmware: all reads are empty
         if not data:
@@ -616,3 +647,53 @@ async def write_config(self, config: dict) -> None:
                     status,
                 )
                 continue
+
+    async def send_xncp_frame(
+        self, payload: xncp.XncpCommandPayload
+    ) -> xncp.XncpCommandPayload:
+        """Send an XNCP frame."""
+        req_frame = xncp.XncpCommand.from_payload(payload)
+        LOGGER.debug("Sending XNCP frame: %s", req_frame)
+        status, data = await self.customFrame(req_frame.serialize())
+
+        if status != t.EmberStatus.SUCCESS:
+            raise InvalidCommandError("XNCP is not supported")
+
+        rsp_frame = xncp.XncpCommand.from_bytes(data)
+        LOGGER.debug("Received XNCP frame: %s", rsp_frame)
+
+        if rsp_frame.status != t.EmberStatus.SUCCESS:
+            raise InvalidCommandError(f"XNCP response error: {rsp_frame.status}")
+
+        return rsp_frame.payload
+
+    async def xncp_get_supported_firmware_features(self) -> xncp.FirmwareFeatures:
+        """Get supported firmware extensions."""
+        rsp = await self.send_xncp_frame(xncp.GetSupportedFeaturesReq())
+        return rsp.features
+
+    async def xncp_set_manual_source_route(
+        self, destination: t.NWK, route: list[t.NWK]
+    ) -> None:
+        """Set a manual source route."""
+        await self.send_xncp_frame(
+            xncp.SetSourceRouteReq(
+                destination=destination,
+                source_route=route,
+            )
+        )
+
+    async def xncp_get_mfg_token_override(self, token: t.EzspMfgTokenId) -> bytes:
+        """Get manufacturing token override."""
+        rsp = await self.send_xncp_frame(xncp.GetMfgTokenOverrideReq(token=token))
+        return rsp.value
+
+    async def xncp_get_build_string(self) -> str:
+        """Get build string."""
+        rsp = await self.send_xncp_frame(xncp.GetBuildStringReq())
+        return rsp.build_string.decode("utf-8")
+
+    async def xncp_get_flow_control_type(self) -> FlowControlType:
+        """Get flow control type."""
+        rsp = await self.send_xncp_frame(xncp.GetFlowControlTypeReq())
+        return rsp.flow_control_type

bellows/ezsp/xncp.py

@@ -0,0 +1,161 @@
+"""Custom EZSP commands."""
+from __future__ import annotations
+
+import dataclasses
+import logging
+from typing import Callable
+
+import zigpy.types as t
+
+from bellows.types import EmberStatus, EzspMfgTokenId
+
+_LOGGER = logging.getLogger(__name__)
+
+COMMANDS: dict[XncpCommandId, type[XncpCommandPayload]] = {}
+REV_COMMANDS: dict[type[XncpCommandPayload], XncpCommandId] = {}
+
+
+def register_command(command_id: XncpCommandId) -> Callable[[type], type]:
+    def decorator(cls: type) -> type:
+        COMMANDS[command_id] = cls
+        REV_COMMANDS[cls] = command_id
+        return cls
+
+    return decorator
+
+
+class Bytes(bytes):
+    def serialize(self) -> Bytes:
+        return self
+
+    @classmethod
+    def deserialize(cls, data: bytes) -> tuple[Bytes, bytes]:
+        return cls(data), b""
+
+
+class XncpCommandId(t.enum16):
+    GET_SUPPORTED_FEATURES_REQ = 0x0000
+    SET_SOURCE_ROUTE_REQ = 0x0001
+    GET_MFG_TOKEN_OVERRIDE_REQ = 0x0002
+    GET_BUILD_STRING_REQ = 0x0003
+    GET_FLOW_CONTROL_TYPE_REQ = 0x0004
+
+    GET_SUPPORTED_FEATURES_RSP = GET_SUPPORTED_FEATURES_REQ | 0x8000
+    SET_SOURCE_ROUTE_RSP = SET_SOURCE_ROUTE_REQ | 0x8000
+    GET_MFG_TOKEN_OVERRIDE_RSP = GET_MFG_TOKEN_OVERRIDE_REQ | 0x8000
+    GET_BUILD_STRING_RSP = GET_BUILD_STRING_REQ | 0x8000
+    GET_FLOW_CONTROL_TYPE_RSP = GET_FLOW_CONTROL_TYPE_REQ | 0x8000
+
+    UNKNOWN = 0xFFFF
+
+
+@dataclasses.dataclass
+class XncpCommand:
+    command_id: XncpCommandId
+    status: EmberStatus
+    payload: XncpCommandPayload
+
+    @classmethod
+    def from_payload(cls, payload: XncpCommandPayload) -> XncpCommand:
+        return cls(
+            command_id=REV_COMMANDS[type(payload)],
+            status=EmberStatus.SUCCESS,
+            payload=payload,
+        )
+
+    @classmethod
+    def from_bytes(cls, data: bytes) -> XncpCommand:
+        command_id, data = XncpCommandId.deserialize(data)
+        status, data = EmberStatus.deserialize(data)
+        payload, rest = COMMANDS[command_id].deserialize(data)
+
+        if rest:
+            _LOGGER.debug("Unparsed data remains after %s frame: %s", payload, rest)
+
+        return cls(command_id=command_id, status=status, payload=payload)
+
+    def serialize(self) -> Bytes:
+        return (
+            self.command_id.serialize()
+            + self.status.serialize()
+            + self.payload.serialize()
+        )
+
+
+class FirmwareFeatures(t.bitmap32):
+    NONE = 0
+
+    # The firmware passes through all group traffic, regardless of group membership
+    MEMBER_OF_ALL_GROUPS = 1 << 0
+
+    # Source routes can be overridden by the application
+    MANUAL_SOURCE_ROUTE = 1 << 1
+
+    # The firmware supports overriding some manufacturing tokens
+    MFG_TOKEN_OVERRIDES = 1 << 2
+
+    # The firmware contains a free-form build string
+    BUILD_STRING = 1 << 3
+
+    # The flow control type (software or hardware) can be queried
+    FLOW_CONTROL_TYPE = 1 << 4
+
+
+class XncpCommandPayload(t.Struct):
+    pass
+
+
+class FlowControlType(t.enum8):
+    Software = 0x00
+    Hardware = 0x01
+
+
+@register_command(XncpCommandId.GET_SUPPORTED_FEATURES_REQ)
+class GetSupportedFeaturesReq(XncpCommandPayload):
+    pass
+
+
+@register_command(XncpCommandId.GET_SUPPORTED_FEATURES_RSP)
+class GetSupportedFeaturesRsp(XncpCommandPayload):
+    features: FirmwareFeatures
+
+
+@register_command(XncpCommandId.SET_SOURCE_ROUTE_REQ)
+class SetSourceRouteReq(XncpCommandPayload):
+    destination: t.NWK
+    source_route: t.List[t.NWK]
+
+
+@register_command(XncpCommandId.SET_SOURCE_ROUTE_RSP)
+class SetSourceRouteRsp(XncpCommandPayload):
+    pass
+
+
+@register_command(XncpCommandId.GET_MFG_TOKEN_OVERRIDE_REQ)
+class GetMfgTokenOverrideReq(XncpCommandPayload):
+    token: EzspMfgTokenId
+
+
+@register_command(XncpCommandId.GET_MFG_TOKEN_OVERRIDE_RSP)
+class GetMfgTokenOverrideRsp(XncpCommandPayload):
+    value: Bytes
+
+
+@register_command(XncpCommandId.GET_BUILD_STRING_REQ)
+class GetBuildStringReq(XncpCommandPayload):
+    pass
+
+
+@register_command(XncpCommandId.GET_BUILD_STRING_RSP)
+class GetBuildStringRsp(XncpCommandPayload):
+    build_string: Bytes
+
+
+@register_command(XncpCommandId.GET_FLOW_CONTROL_TYPE_REQ)
+class GetFlowControlTypeReq(XncpCommandPayload):
+    pass
+
+
+@register_command(XncpCommandId.GET_FLOW_CONTROL_TYPE_RSP)
+class GetFlowControlTypeRsp(XncpCommandPayload):
+    flow_control_type: FlowControlType