Overview

This suite contains a number of kernel operations, called Parallel Research Kernels, plus a simple build system intended for a Linux-compatible environment. Most of the code relies on open standard programming models and thus can be executed on many computing systems.

These programs should not be used as benchmarks. They are operations to explore features of a hardware platform, but they do not define fixed problems that can be used to rank systems. Furthermore they have not been optimimzed for the features of any particular system.

Build Instructions

To build the codes the user needs to make certain changes by editing text files. Assuming the source tree is untarred in directory $PRK, the following file needs to be copied to $PRK/common/make.defs and edited.

$PRK/common/make.defs.in -- This file specifies the names of the C compiler (CC), and of the MPI (Message Passing Interface) compiler MPICC or compile script. If MPI is not going to be used, the user can ignore the value of MPICC. The compilers should already be in your path. That is, if you define CC=icc, then typing which icc should show a valid path where that compiler is installed. Special instructions for building and running codes using Charm++, Grappa, OpenSHMEM, or Fine-Grain MPI are in README.special.

We provide examples of working examples for a number of programming environments

File (in ./common/)	Environment
make.defs.cray	Cray compilers on Cray XC systems.
make.defs.cuda	GCC with the CUDA compiler (only used in C++/CUDA implementation).
make.defs.gcc	GCC compiler tool chain, which supports essentially all implementations.
make.defs.ibmbg	IBM Blue Gene/Q compiler toolchain (infrequently tested).
make.defs.intel	Intel compiler tool chain, which supports most implementations.
make.defs.llvm	LLVM compiler tool chain, which supports most implementations.
make.defs.musl	GCC compiler toolchain with MUSL as the C standard library, which is required to use C11 threads.
make.defs.pgi	PGI compiler toolchain (infrequently tested).

Some of the C++ implementations require you to install Boost, RAJA, KOKKOS, Parallel STL, respectively, and then modify make.defs appropriately. Please see the documentation in the C++ subdirectory.

Because we test essentially everything in Travis CI, you can refer to the $PRK/travis subdirectory for install scripts that can be readily modified to install any of the dependencies in your local environment.

Supported Programming Models

The suite of kernels currently has complete parallel implementations in OpenMP, MPI, Adaptive MPI and Fine-Grain MPI. There is also a SERIAL reference implementation.

The suite is currently being extended to include Charm++, MPI+OpenMP, OpenSHMEM, UPC, and Grappa, Fortran with coarrays, as well as three new variations of MPI:

1. MPI with one-sided communications (MPIRMA)
2. MPI with direct use of shared memory inside coherency domains (MPISHM)
3. MPI with OpenMP inside coherency domains (MPIOPENMP) These extensions are not yet complete.

More recently, we have implemented many single-node programming models in modern languages.

Modern C++

y = yes

i = in-progress, incomplete, or incorrect

f = see footnotes

Parallelism	p2p	stencil	transpose	nstream	sparse	dgemm
None	y	y	y	y	y	y
C++11 threads, async			y
OpenMP	y	y	y	y
OpenMP tasks	y	y	y	y
OpenMP target	y	y	y	y
OpenCL 1.x	i	y	y	y
SYCL		y	y	y
Boost.Compute				y
Parallel STL	y	y	y	y
Thrust				y
TBB	y	y	y	y
Kokkos	y	y	y	y
RAJA	y	y	y	y
CUDA	i	y	y	y
CUBLAS			y	y		y
CBLAS			y			y
OpenACC	y

• SYCL
• Boost.Compute
• TBB
• Kokkos
• RAJA

Modern C

Parallelism	p2p	stencil	transpose	nstream	sparse
None	y	y	y
C11 threads			y
OpenMP	y	y	y
OpenMP tasks	y	y	y
OpenMP target	y	y	y
Cilk		y	y
ISPC			y

• ISPC

Modern Fortran

Parallelism	p2p	stencil	transpose	nstream	sparse	dgemm
None	y	y	y	y		y
Intrinsics			y	y		y
coarrays	y	y	y
OpenMP	y	y	y	y		y
OpenMP tasks	y	y	y	y
OpenMP target	y	y	y	y
OpenACC		y	y	y

By intrinsics, we mean the language built-in features, such as colon notation or the TRANSPOSE intrinsic. We use DO CONCURRENT in a few places.

Other languages

x = externally supported (in the Chapel repo)

Parallelism	p2p	stencil	transpose	nstream	sparse	dgemm
Python 3	y	y	y	y	y	y
Python 3 w/ Numpy	y	y	y	y	y	y
Julia	y	y	y
Octave (Matlab)	y	y	y
Chapel	x	x	x

Global make

Please run make help in the top directory for the latest information.

To build all available kernels of a certain version, type in the root directory:

Command	Effect
make all	builds all kernels.
make allserial	builds all serial kernels.
make allopenmp	builds all OpenMP kernels.
make allmpi	builds all conventional two-sided MPI kernels.
make allmpi1	builds all MPI kernels.
make allfgmpi	builds all Fine-Grain MPI kernels.
make allampi	builds all Adaptive MPI kernels.
make allmpiopenmp	builds all hybrid MPI+OpenMP kernels.
make allmpirma	builds all MPI-3 kernels with one-sided communications.
make allmpishm	builds all kernels with MPI-3 shared memory.
make allshmem	builds all OpenSHMEM kernels.
make allupc	builds all Unified Parallel C (UPC) kernels.
make allcharm++	builds all Charm++ kernels.
make allgrappa	builds all Grappa kernels.
make allfortran	builds all Fortran kernels.
make allc1x	builds all C99/C11 kernels.
make allcxx	builds all C++11 kernels.

The global make process uses a single set of optimization flags for all kernels. For more control, the user should consider individual makes (see below), carefully choosing the right parameters in each Makefile. If a a single set of optimization flags different from the default is desired, the command line can be adjusted: make all<version> default_opt_flags=<list of optimization flags>

The global make process uses some defaults for the Branch kernel (see Makefile in that directory). These can be overridden by adjusting the command line: make all<version> matrix_rank=<n> number_of_functions=<m> Note that no new values for matrix_rank or number_of_functions will be used unless a make veryclean has been issued.

Individual make

Descend into the desired sub-tree and cd to the kernel(s) of interest. Each kernel has its own Makefile. There are a number of parameters that determine the behavior of the kernel that need to be known at compile time. These are explained succinctly in the Makefile itself. Edit the Makefile to activate certain parameters, and/or to set their values.

Typing make without parameters in each leaf directory will prompt the user for the correct parameter syntax. Once the code has been built, typing the name of the executable without any parameters will prompt the user for the correct parameter syntax.

Running test suite

After the desired kernels have been built, they can be tested by executing scripts in the 'scripts' subdirectory from the root of the kernels package. Currently two types of run scripts are supported. scripts/small: tests only very small examples that should complete in just a few seconds. This merely tests functionality of kernels and installed runtimes scripts/wide: tests examples that will take up most memory on a single node with 64 GB of memory.

Only a few parameters can be changed globally; for rigorous testing, the user should run each kernel individually, carefully choosing the right parameters. This may involve editing the individual Makefiles and rerunning the kernels.

Example build and runs

make all default_opt_flags="-O2" "matrix_rank=7" "number_of_functions=200" 
./scripts/small/runopenmp
./scripts/small/runmpi1
./scripts/wide/runserial
./scripts/small/runcharm++
./scripts/wide/runmpiopenmp

To exercise all kernels, type

./scripts/small/runall
./scripts/wide/runall

Quality Control

We have a rather massive test matrix running in Travis CI. Unfortunately, the Travis CI environment may vary with time and occasionally differs from what we are running locally, which makes debugging tricky. If the status of the project is not passing, please inspect the details, because this may not be an indication of an issue with our project, but rather something in Travis CI.

License

See COPYING for licensing information.

Note on stream

Note that while our nstream operations are based on the well known STREAM benchmark by John D. McCalpin, we modified the source code and do not follow the run-rules associated with this benchmark. Hence, according to the rules defined in the STREAM license (see clause 3b), you must never report the results of our nstream operations as official "STREAM Benchmark" results. The results must be clearly labled whenever they are published. Examples of proper labelling include:

  "tuned STREAM benchmark results" 
  "based on a variant of the STREAM benchmark code" 

Other comparable, clear, and reasonable labelling is acceptable.