A Chataigne module to control grandMA3 via OSC
This Chataigne module facilitates the mapping of external sources to grandMA3 via the OSC interface. The faders and buttons of executors as well as directly of sequences can be changed. Of course there is also a function to send commands (cmd) to grandMA3. For all those who only use an onPC node there is the possibility to toggle "blind" and "freeze" and display the status for example on a midi controller.
The following functions are implemented in the plugin:
- Executor
- Move Executor Fader
- Push Executor Button
- Turn Executor Encoder
- Change Executor Speedscale
- Add Executor to SyncList
- Sync Executors
- Sequence
- Move Sequence Fader
- Push Sequence Button
- Master
- Move Master Fader
- Move Master BPM Fader
- Speed
- Move SpeedMaster Fader
- Move SpeedMaster BPM Fader
- Programmer
- Turn Encoder
- Set Color
- Control
- Send Command
- Set Preview
- Set Blind
- Set Freeze
- Show Gui
- Show View
The range of functions depends on the interface. For the executor faders and buttons, the function is determined by GrandMA3 on the playback page. The sequence faders and buttons can take on any functionality. So it is possible for example to map "Swop", "Speed", "Flash" and "Learn" of a sequence without making a setting in GrandMA3.
Activate OSC in grandMA3 in the "In & Out" menu. The OSC input must be activated globally (top right) and an input source must be created. The screenshot shows a simple configuration as an example.
After the first feedback, it becomes clear that the encoder functionality is more important than I would have thought at first. I bought a MidiFighter Twister to test the functions. Since the mapping was too cumbersome for me, I wrote another Chataigne module that facilitates the mapping for endless encoders like in the MidiFighter.
If you want other endless encoders supported, feel free to adapt the code and send it back to the project. This is the only way to create a good plugin. Unfortunately, I don't have another midi controller with endless encoders at my disposal and therefore can't do that.
The BPM faders allow to send BPM values (beats per minute) to executors or masters instead of values between 0 and 100%. This allows speeds in grandMA3 to be synchronized with external sources as:
- Ableton Link
- Midiclock
- CDJs/XDJs (via BeatLinkTrigger)
- Resolume
GrandMA3 sequences do not know a beat grid and are therefore difficult to synchronize with Resolume, Ableton or CDJs without further tools. In this plugin there are the functions Add Executor to SyncList and Sync Executors to enable synchronization to beats.
Add Executor to SyncList Adds an executor to a list of executors to be synchronized. Sync Executors then restarts all executors on that list. Typically, Sync Executors is mapped to the beat signal, for example the new Bar trigger from Ableton Link. This way you can realize, for example, that dimmer phasers always have their maximum brightness on the kick. On freudundlight.de you can find an explanation of how you can use this function to realise a beat synchronisation between Pioneer CDJs and grandMA3.