Trade history bot for Binance. Deploy on server Ubuntu 16, 18

INSTALL PYTHON & PIP

sudo add-apt-repository ppa:jonathonf/python-3.6

if it gives add-apt-repository: command not found than use: sudo apt-get install software-properties-common

Put each command separatly, one by one

sudo apt update
sudo apt install python3.6
sudo apt install python3.6-dev
sudo apt install python3.6-venv
sudo apt install python3-distutils
wget https://bootstrap.pypa.io/get-pip.py
sudo python3.6 get-pip.py
sudo ln -s /usr/bin/python3.6 /usr/local/bin/python3
sudo ln -s /usr/local/bin/pip /usr/local/bin/pip3
sudo ln -s /usr/bin/python3.6 /usr/local/bin/python

Install project tradehistory

sudo apt-get install git-core
git clone https://github.com/volkovartem77/tradehistory.git

Creating virtualenv using Python 3.6

sudo pip install virtualenv
virtualenv -p /usr/bin/python3.6 ~/tradehistory/venv

Before launching

Clone the project and install all dependencies

cd ~/tradehistory; . venv/bin/activate
pip install -r requirements.txt
deactivate

Install InfluxDB

echo "deb https://repos.influxdata.com/ubuntu bionic stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
sudo curl -sL https://repos.influxdata.com/influxdb.key | sudo apt-key add -
sudo apt-get update
sudo apt-get install -y influxdb
sudo systemctl enable --now influxdb
sudo systemctl is-enabled influxdb

Create database (in terminal)

influx
> CREATE DATABASE storage
> SHOW DATABASES

Make sure that you have storage in databases list and then
> exit

Go into the code and check websocket address. Line 68 where Socket is initializing\

sudo nano ~/tradehistory/wsServer.py

Install & config supervisor

sudo apt-get install supervisor
cd ~/tradehistory; cp app.conf /etc/supervisor/conf.d/app.conf
mkdir /var/log/tradehistory
supervisorctl reread
supervisorctl reload

Run app

Using supervisor (if you are in remote server, like VDS)

sudo supervisorctl start wsBinanceDOM
sudo supervisorctl start wsServer

Check the state by following command

sudo supervisorctl status

If both wsBinanceDOM and wsServer has RUNNING status so everything is right.

Without supervisor (if you are in local machine or IDE)\

• Launch wsBinanceDOM.py.
  The output is going to be like this:

start websocket Binance
['MATIC_BTC', 'MATIC_USDT', 'TNT_BTC', 'TNT_USDT']
maticbtc@trade/maticusdt@trade/tntbtc@trade/tntusdt@trade/
### opened ###
MATICBTC {'e': 'trade', 'E': 1559283040963, 's': 'MATICBTC' ...

• Launch wsServer.py
  It is internal websocket server. There is no output for now.