This buildsystem for the OpenWRT Linux distribution has been modified by Onion Corporation to build firmware for the Onion Omega2 and Omega2S family of devices.
The buildsystem can be used to create software packages and firmware images for Omega2 and Omega2S devices.
This document is meant to give a quickstart intro and point you in the right direction on using the build system and customizing the output firmware images to suit your needs.
See the OpenWRT documentation on the build system for more detailed descriptions and advanced usage.
What's covered in this document:
- A Note of Warning
- Step 1: Preparing the Build System
- Step 2: Compiling the Build System
- Step 3: Customizing the Firmware Image
- Step 4: Deploying your Custom Firmware to Devices
- Contributing
- Appendix
Make sure to proceed with caution, it's possible to brick or even permanently damage your device by flashing a firmware that's not configured properly. Onion Corporation is not responsible for any damage to your device caused by using custom firmware or packages not built and released by Onion Corporation.
But this shouldn't be too much of a cause for concern since bricked devices can usually be restored using the bootloader. See our documentation on using the bootloader to flash new firmware to the device. There are 2 options:
- Web recovery mode (requires ethernet and UART0 access)
- Flashing firmware from USB Storage (requires USB and UART0 access)
We strongly recommend first building firmware with the default configuration and THEN adding your own customizations
What's covered in this step:
Minimum specs:
- At least 8GB RAM
- A modern, powerful CPU - the more cores on the processor, the faster the build system compilation
For reference, at Onion, we generally use a server (like AWS EC2) when working with the build system.
There are two preferred ways to use the buildsystem:
- Using the
onion/omega2-sourceDocker image Recommended method - Running the build system on a Linux system
The Docker image takes care of all environmental configuration and is the recommended method. We recommend getting familiar with how Docker before trying this procedure.
We recommend running Docker on a Linux system.
Procedure:
- Install Docker on your system: https://www.docker.com/get-started
- Pull our Docker image by running:
docker pull onion/omega2-source
- Once the image has been pulled to your computer, you can run your own container based on the image:
docker run -it onion/omega2-source /bin/bash
- Your container will now be up and running! You'll be using it for the rest of the steps outlined below.
Not recommended for beginners
Procedure to setup the build system on a Ubuntu Linux System:
- Setup Linux environment by installing the required packages:
sudo apt-get update
sudo apt-get install -y build-essential vim git wget curl subversion build-essential libncurses5-dev zlib1g-dev gawk flex quilt git-core unzip libssl-dev python-dev python-pip libxml-parser-perl default-jdk rsync time
- Download the Build System from Github:
git clone https://github.com/OnionIoT/source.git
cd source
- Prepare build system:
sh scripts/onion-feed-setup.sh
python scripts/onion-setup-build.py
This will initialize & configure all the package feeds as well as setup the
.configfile to match this repo. With these commands, the firmware built will match the official firmware released by Onion.
- The build system is ready to be used to make firmware images and software packages
Applies to both Docker and Linux System installations
Once you've setup your build system and have been using it, you'll want to update it from time to time.
In OpenWrt, a package "feed" is a collection of predefined build recipes (package makefiles) for software packages. Generally, feeds reside in version control systems on remote servers.
As feeds are generally under development, it's possible for your local copy of the feed to become out of date. In this case, you'll want to update the package feeds.
See the OpenWRT documentation on package feeds to learn more.
To update the Onion package feed, run this command:
./scripts/feeds update onion
Run this command if you're seeing compilation issues errors in Onion packages, this will likely fix the problem. If not, let us know on the Onion Community.
To update all of the feeds, run this command:
./scripts/feeds update -a
If new packages have been added to the package feeds, they will not show up in the menuconfig until "installed" to the build system using ./scripts/feeds install <PKG NAME>.
See the OpenWRT documentation on the feeds script for more info.
To grab the latest code from this repo, run:
git pull
If you've made modifications to which packages are built/included in the firmware, these changes will be reflected in your local .config file.
Create a backup copy of your .config file before proceeding. The git pull command will not work unless the .config file is restored to it's original state by running git checkout .config and running git pull again. Note that this will REMOVE all of your customizations!
What's covered in this step:
- How to Compile
- Multi-Core Compilation
- Reducing Compile Time with the Minimal Build Configuration
- Where to Find the Compile Output
- How to Debug Compilation Issues
Optional: to make the compilation MUCH quicker, run the following command:
python scripts/onion-setup-build.py -c .config.O2-minimum
Learn more about minimum build below.
Run this command to compile the build system:
make
The compilation can take some time! On the scale of hours depending on your machine. See the two following sections for ideas on reducing compile time.
This will create:
- Firmware images for the Omega2, Omega2+, and Omega2 Pro (same as those released by Onion)
- Software packages (every package included in the firmware and included in the Onion Package Repo)
For faster compilation, use make -j N, where N is the number of CPU cores + 1
To significantly reduce compile time, you can configure the build system for a minimal build. This means the build system will only build packages that are included in the firmware.
python scripts/onion-setup-build.py -c .config.O2-minimum
Learn more about changing the build system configuration in the appendix.
Firmware images can be found at bin/targets/ramips/mt76x8/:
| Devices | Product SKU | Firmware Image |
|---|---|---|
| Omega2 & Omega2S | OM-O2 & OM-O2S | openwrt-ramips-mt76x8-omega2-squashfs-sysupgrade.bin |
| Omega2+ & Omega2S+ | OM-O2P & OM-O2SP | openwrt-ramips-mt76x8-omega2p-squashfs-sysupgrade.bin |
| Omega2 Pro | OM-O2PRO | openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin |
| Omega2 LTE | OM-O2LTE-NA & OM-O2LTE-G | openwrt-ramips-mt76x8-omega2lte-squashfs-sysupgrade.bin |
| Omega2 Dash | OM-O2DASH | openwrt-ramips-mt76x8-omega2dash-squashfs-sysupgrade.bin |
To learn more about compiling images for the Omega2 LTE and Omega2 Dash, see the appendix.
Software package files can be found at bin/packages/mipsel_24kc/, separated by directories named by each package feed.
Additional core software packages (including kernel modules) can be found at bin/targets/ramips/mt76x8/packages
If you're encountering errors during compilation, you'll likely see something like the following:
make -r world: build failed. Please re-run make with -j1 V=s to see what's going on
/root/source/include/toplevel.mk:198: recipe for target 'world' failed
make: *** [world] Error 1
To get more visibility into the error, re-run your compilation as the error prompt suggests:
make -j1 V=s
The error messages will point you in the direction of the package responsible for the compilation error.
- If the problematic package is from Onion, see the Updating the Package Makefiles section above. This will likely resolve your issue.
- If the problematic package is not related to Onion packages, it's likely due to environment issues or issues with the code. Please check with the original authors to get pointers for debugging.
Now that you've successfully prepared and compiled the build system, you're ready to make customizations to suit your individual needs!
What's covered in this step:
- Choosing which Packages to Include in the Firmware
- Adding Custom Files to the Firmware Image
- Making your Own Software Packages
Refer to Step 2: Compiling the Build System for info on building and debugging.
See the OpenWRT documentation on the build system for more details.
The build system has a text-based GUI called menuconfig that can be used to select which packages will be included in the firmware images (among other things).
To start it, run:
make menuconfig
Navigation:
- Use the up and down arrow keys to navigate
- Enter to go into sub-menus
- Escape+Escape to go out of a sub-menu
Selecting a Package:
- When you've found a package you want include or remove, press space to cycle through the selection options
- Selection options:
<*>= package will be included in the firmare image<M>= package will be compiled as a stand-alone package, but not included in the firmware image. See Step 2 for info on where to find package output.< >= package will not be included in firmware or compiled as a stand-alone package
Searching for a Package:
- Press
/to activate the search menu - Type in a search term and press Enter
- Use the up and down arrow keys to scroll through the results
- Press Escape+Escape to leave the search menu
Exiting menuconfig:
- Navigate up to the top-level menu
- Press Escape+Escape to exit menuconfig
- If you've made changes, you will be prompted if the new configuration should be saved. Use the left and right arrow keys to choose between
YesandNo, press Enter to make your selection - If you've saved your changes, they will be reflected in the
.configfile
See the OpenWRT documentation on menuconfig for more details and advanced usage.
By reducing the amount of packages and files included in the firmware, the size of the resulting firmware image will be reduced. A smaller firmware image means more free space on the device.
Logical, but worth mentioning.
For WiFi driver stability, we recommend not changing the selection of kernel modules. If you really need to remove a kernel module from the firmware image, keep it compiled as a stand-alone package.
If your requirements include a customized web page or web app to run on the Omega, ie you need files installed in /www on the device, you will need to make sure the onion-os package is NOT included in the firmware.
The build system offers a very straight forward method for adding custom files to the firmware image:
Just drop the desired files into the files directory in the build system
The directory structure within files will correspond to the / directory on the device.
Say you wanted your firmware image to include a config.json file in the /root directory, your build system should then have a files/root/config.json file.
When to use this: should be used for configuration or helper files, especially if those files will not change much.
When NOT to use this: this is not a very efficient way to include binaries or applications in your firmware images. See the next section for info on packaging your applications.
See the OpenWRT documentation on custom files for more details.
Creating your own software package is the best way to include your own custom applications in firmware images.
Benefits:
- Easy versioning - software packages have version numbers built in and recognized by the opkg package manager
- Easy to update the application - just use the opkg package manager on the device
- Repeatable process for building your application
Two options for making your own package:
- Create your own package feed
- Pro: Proper and maintainable - will make for easy firmware builds and easier future development
- Pro: Flexible - feed source code can be version controlled, zipped up, or even just local files
- Con: Needs more up-front work to get set up
- Add it to one of the existing package feeds
- Pro: Quick to get up and running
- Con: Less maintainable and robust - It's generally a good idea to version control your package makefiles for repeatability and future development
For more info on working with feeds, see the OpenWRT feed documentation. Specifically, check out these sections:
Once you've sorted out your feed, you'll need to create a Package Makefile. The Package Makefile acts like a build recipe for your package. It defines:
- The package name and version number
- Where to get the source code (Git repo, locally, etc)
- Where the package can be found in the menuconfig
- What other packages it depends on
- Compilation instructions (if required)
- Instructions on what to install on the device and where
For more details on this process, see the OpenWRT documentation on creating a package.
For examples of package makefiles, see the Onion Package feed on GitHub.
Specific examples on types of packages:
- C application with a regular makefile - Cross-compile from GitHub source and install the resulting binary: https://github.com/OnionIoT/OpenWRT-Packages/blob/openwrt-18.06/omega2-ctrl/Makefile
- C application that uses cmake and depends on libraries: https://github.com/OnionIoT/OpenWRT-Packages/blob/openwrt-18.06/ogps/Makefile
- Installing files from a GitHub repo: https://github.com/OnionIoT/OpenWRT-Packages/blob/openwrt-18.06/onion-ubus/Makefile
- Install files bundled with the package makefile and dependent packages: https://github.com/OnionIoT/OpenWRT-Packages/tree/openwrt-18.06/omega2pro
Once you've built your own firmware images, you'll want to flash the image to a device. And potentially start thinking about how to update devices in the field.
What's covered in this step:
To flash the output firmware image on your device, you will need to:
- Transfer the firmware image to the device (Use the /tmp directory)
- Use the
sysupgradeutility to flash the firmware image to the device's on-board flash storage
For details on this process, see the Onion documentation article on manual firmware installation.
Keep in mind Step 1 from the article will be different in your case since you'll want to use your own firmware image. And not a firmware image from the Onion firmware repository.
When to use this method: During development when the firmware is changing rapidly (since this is a quick but manual process)
When NOT to use this method: Updated devices deployed in the field since you'll likely want more control over the process
The oupgrade software package (part of the Onion package feed) is meant to facilitate firmware updates on devices.
It is designed to:
- Check the version info of the firmware currently on the device
- Check the Onion firmware server for available latest and stable releases
- Perform an upgrade if necessary
In this context, a firmware server consists of an online repository to hold the firmware images, and an API to provide information about firmware releases. The Onion firmware repository can be found here: http://repo.onioniot.com/omega2/images/
Learn more about using oupgrade in the Onion documentation.
To have full control over the firmware upgrades on your deployed devices, you can create and host your own firmware server.
By default, oupgrade will check against the Onion firmware API and only when manually run on the device. However, oupgrade can also be configured to use a different firmware server and behave more automatically.
Specifically, it can be configured to:
- Point to your own firmware API
- Automatically check for updates based on a time interval
- Respond to the firmware API to acknowledge a firmware update
To guide users in building their own firmware API, Onion has made an example implementation of a firmware API written in NodeJS available on GitHub. Learn more here: https://github.com/OnionIoT/OTA-Server-Sample
In addition to the firmware API, you will also need a firmware repo to hold the firmware images. Tools like AWS S3 can be used for this purpose.
Contributions are welcome!
We'll be following the OpenWRT contribution guidelines:
To help keep the codebase consistent and readable, and to help people review your contribution, we ask you to follow the rules you find in the wiki at this link https://openwrt.org/submitting-patches
We will not be accepting any contributions that just enable compilation of software packages.
You can instead try enabling the OpenWRT package repos on your Omega2 to install the software package you need.
More info on that here: http://docs.onion.io/omega2-docs/using-opkg.html#you-dont-have-a-package-i-wantneed
- This build system is used to generate firmware images for the following Omega2 devices,
- All released firmware images for Omega2 products were generated with this build system. The images can be found at http://repo.onioniot.com/omega2/images/ for the following devices:
- Omega2 & Omega2S (SKUs: OM-O2/OM-O2S)
- Omega2+ & Omega2S+ (SKUs: OM-O2P/OM-O2SP)
- Omega2 Pro (SKU: OM-O2PRO)
- Omega2 LTE (SKUs: OM-O2LTE-NA & OM-O2LTE-G)
- Omega2 Dash (SKU: OM-O2DASH)
- This build system generates firmware for the M7688 SoC with Onion's Enhanced Warp Core WiFi driver
- It is available as an OpenWRT package for systems running Linux Kernel 4.14.81
The .config file holds all of the configuration for the build system: which platform and device to build for, which packages to build, which packages should be included in the firmware image, etc.
After completing Step 1 in this guide, you'll notice the .config file is a symlink.
The onion-setup-build.py script can be used to point to several pre-made configuration files:
python scripts/onion-setup-build.py -c <CONFIG FILE>
Also try running
python scripts/onion-setup-build.py --helpto see the usage info
| Configuration File | Creates Firmware Images for | Notes |
|---|---|---|
.config.O2 |
Omega2, Omega2+, Omega2 Pro | Baseline configuration file for the Omega2. Also compiles all software packages that are included in the Onion Package Repo |
.config.O2-minimum |
Omega2, Omega2+, Omega2 Pro | Quick minimum build. Only compiles software packages that are included in the firmware |
.config.O2LTE |
Omega2 LTE | Configured to create images and required packages for the Omega2 LTE device |
.config.O2Dash |
Omega2 Dash | Configured to create images and required packages for the Omega2 Dash device |
To compile firmware images for the Omega2 LTE, run the following and then compile the build system:
python scripts/onion-setup-build.py -c .config.O2LTE
To compile firmware images for the Omega2 Dash, run the following and then compile the build system:
python scripts/onion-setup-build.py -c .config.O2Dash
- See
CHANGELOG.mdfor a listing of the changes for each firmware version and build - Onion Corporation is not responsible for any damage to your device caused by using custom firmware or packages not built and released by Onion Corporation. See
DISCLAIMER.mdfor Onion's disclaimer regarding this build system