py32f0-template

Template project for Puya PY32F0 MCU
Supports GNU Arm Embedded Toolchain
Supports J-Link and DAPLink/PyOCD programmers
Supports IDE: VSCode

Puya PY32F0 Family

PY32F0 are cost-effective Arm Cortex-M0+ microcontrollers featured with wide range operating voltage from 1.7V to 5.5V. Datesheets and Reference Manuals can be found at WIKI.

PY32F002B

Frequency up to 24 MHz, 24 Kbytes of Flash memory, 3 Kbytes of SRAM.

PY32F002B
- PY32F002Bx(24KB Flash/3KB RAM)

PY32F0xx

Frequency up to 48 MHz, 16 to 64 Kbytes of Flash memory, 3 to 8 Kbytes of SRAM.

PY32F002A
- PY32F002Ax5(20KB Flash/3KB RAM)
PY32F003
- PY32F003x4(16KB Flash/2KB RAM), PY32F003x6(32KB Flash/4KB RAM), PY32F003x8(64KB Flash/8KB RAM)
PY32F030
- PY32F030x4(16KB Flash/2KB RAM), PY32F030x6(32KB Flash/4KB RAM), PY32F030x8(64KB Flash/8KB RAM)

PY32F07x

Frequency up to 72 MHz, 128 Kbytes of Flash memory, 16 Kbytes of SRAM, with more peripherals(CAN, USB)

PY32F040
- PY32F040xB(128KB Flash/16KB RAM)
PY32F071
- PY32F071xB(128KB Flash/16KB RAM)
PY32F072
- PY32F072xB(128KB Flash/16KB RAM)

File Structure

├── Build                       # Build results
├── Docs                        # Datesheets and User Manuals
├── Examples
│   ├── PY32F002B               # PY32F002B examples
│   │   ├── HAL                 # HAL library examples
│   │   └── LL                  # LL(Low Layer) library examples
│   ├── PY32F07x                # PY32F07x examples
│   │   └── HAL                 # HAL library examples
│   └── PY32F0xx                # PY32F002A,PY32F003,PY32F030 examples
│       ├── FreeRTOS            # FreeRTOS examples
│       ├── HAL                 # HAL library examples
│       └── LL                  # LL(Low Layer) library examples
├── Libraries
│   ├── CMSIS
│   ├── EPaper                  # Waveshare e-paper library
│   ├── FreeRTOS                # FreeRTOS library
│   ├── LDScripts               # LD files
│   ├── PY32F002B_HAL_BSP       # PY32F002B HAL BSP
│   ├── PY32F002B_HAL_Driver    # PY32F002B HAL library
│   ├── PY32F002B_LL_BSP        # PY32F002B LL(low layer) BSP
│   ├── PY32F002B_LL_Driver     # PY32F002B LL library
│   ├── PY32F07x_HAL_BSP        # PY32F040/071/072 HAL BSP
│   ├── PY32F07x_HAL_Driver     # PY32F040/071/072 HAL library
│   ├── PY32F0xx_HAL_BSP        # PY32F002A/003/030 HAL BSP
│   ├── PY32F0xx_HAL_Driver     # PY32F002A/003/030 HAL library
│   ├── PY32F0xx_LL_BSP         # PY32F002A/003/030 LL BSP
│   └── PY32F0xx_LL_Driver      # PY32F002A/003/030 LL library
|
├── Makefile                    # Make config
├── Misc
│   ├── Flash
│   │   ├── JLinkDevices        # JLink flash loaders
│   │   └── Sources             # Flash algorithm source code
│   ├── Puya.PY32F0xx_DFP.x.pack # DFP pack file for PyOCD
│   └── SVD                     # SVD files
├── README.md
├── rules.mk                    # Pre-defined rules include in Makefile 
└── User                        # User application code

Requirements

PY32F0 EVB or boards of PY32F002/003/030 series
Programmer
- J-Link: J-Link OB programmer
- PyOCD: DAPLink or J-Link
SEGGER J-Link Software and Documentation pack https://www.segger.com/downloads/jlink/
PyOCD https://pyocd.io/
GNU Arm Embedded Toolchain

Building

1. Install GNU Arm Embedded Toolchain

Download the toolchain from Arm GNU Toolchain Downloads according to your pc architecture, extract the files

sudo mkdir -p /opt/gcc-arm/
sudo tar xvf arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi.tar.xz -C /opt/gcc-arm/
cd /opt/gcc-arm/
sudo chown -R root:root arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi/

2. Clone This Repository

Clone this repository to local workspace

git clone https://github.com/IOsetting/py32f0-template.git

3. Install SEGGER J-Link Or PyOCD

Option 1: Install SEGGER J-Link

Download and install JLink from J-Link / J-Trace Downloads.

# installation command for .deb
sudo dpkg -i JLink_Linux_V784f_x86_64.deb
# uncompression command for .tar.gz
sudo tar xvf JLink_Linux_V784f_x86_64.tgz -C [target folder]

The default installation directory is /opt/SEGGER

Copy [Project directory]/Misc/Flash/JLinkDevices to [User home]/.config/SEGGER/

cd py32f0-template
cp -r Misc/Flash/JLinkDevices/ ~/.config/SEGGER/

Read more: https://wiki.segger.com/J-Link_Device_Support_Kit

Option 2: Install PyOCD

Don't install from apt repository, because the version 0.13.1+dfsg-1 is too low for J-Link probe.

Install PyOCD from pip

pip uninstall pyocd

This will install PyOCD into:

/home/[user]/.local/bin/pyocd
/home/[user]/.local/bin/pyocd-gdbserver
/home/[user]/.local/lib/python3.10/site-packages/pyocd-0.34.2.dist-info/*
/home/[user]/.local/lib/python3.10/site-packages/pyocd/*

In Ubuntu, .profile will take care of the PATH, run source ~/.profile to make pyocd command available

4. Edit Makefile

Change the settings in Makefile

MCU_TYPE The MCU type you are using
USE_LL_LIB Puya provides two sets of library, HAL and LL, set USE_LL_LIB ?= y to use LL instead of HAL.
- No LL Library for PY32F07x
ENABLE_PRINTF_FLOAT set it to y to -u _printf_float to link options. This will increase the binary size.
USE_FREERTOS Set USE_FREERTOS ?= y will include FreeRTOS in compilation
USE_DSP Include CMSIS DSP or not
FLASH_PROGRM
- If you use J-Link, FLASH_PROGRM can be jlink or pyocd
- If you use DAPLink, set FLASH_PROGRM ?= pyocd
- ST-LINK is not supported yet.
ARM_TOOCHAIN Make sure it points to the correct path of arm-none-eabi-gcc

##### Project #####

PROJECT			?= app
# The path for generated files
BUILD_DIR		= Build

# MCU types: 
#   PY32F002Ax5
#   PY32F002Bx5
#   PY32F003x6, PY32F003x8, 
#   PY32F030x6, PY32F030x8, 
#   PY32F072xB
MCU_TYPE		= PY32F072xB

##### Options #####

# Use LL library instead of HAL, y:yes, n:no
USE_LL_LIB        ?= n
# Enable printf float %f support, y:yes, n:no
ENABLE_PRINTF_FLOAT ?= n
# Build with FreeRTOS, y:yes, n:no
USE_FREERTOS      ?= n
# Build with CMSIS DSP functions, y:yes, n:no
USE_DSP           ?= n
# Programmer, jlink or pyocd
FLASH_PROGRM      ?= pyocd

##### Toolchains #######
ARM_TOOCHAIN      ?= /opt/gcc-arm/arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi/bin

# path to JLinkExe
JLINKEXE		?= /opt/SEGGER/JLink/JLinkExe
# path to PyOCD
PYOCD_EXE		?= pyocd

5. Compiling And Flashing

# clean source code
make clean
# build
make
# or make with verbose output
V=1 make
# flash
make flash

Debugging In VSCode

Install Cortex Debug extension, add a new configuration in launch.json, e.g.

{
    "armToolchainPath": "/opt/gcc-arm/arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi/bin/",
    "toolchainPrefix": "arm-none-eabi",
    "name": "Cortex Debug",
    "cwd": "${workspaceFolder}",
    "executable": "${workspaceFolder}/Build/app.elf",
    "request": "launch",        // can be launch or attach
    "type": "cortex-debug",
    "runToEntryPoint": "Reset_Handler", // "main" or other function name. runToMain is deprecated
    "servertype": "jlink",  // jlink, openocd, pyocd, pe and stutil
    "device": "PY32F030X8",
    "interface": "swd",
    "preLaunchTask": "build",  // Set this to run a task from tasks.json before starting a debug session
    // "preLaunchCommands": ["Build all"], // Uncomment this if not using preLaunchTask
    "svdFile": "${workspaceFolder}/Misc/SVD/py32f030xx.svd",  // svd for this part number
    "showDevDebugOutput": "vscode", // parsed, raw, vscode:vscode log and raw
    "swoConfig":
    {
        "enabled": true,
        "cpuFrequency": 8000000, // Target CPU frequency in Hz
        "swoFrequency":  4000000,
        "source": "probe", // either be “probe” to get directly from the debug probe, 
                           // or a serial port device to use a serial port external to the debug probe.
        "decoders":
        [
            {
                "label": "ITM port 0 output",
                "type": "console",
                "port": 0,
                "showOnStartup": true,
                "encoding": "ascii"
            }
        ]
    }
}

If Cortex Debug cannot find JLinkGDBServerCLExe, add the following line to settings.json

"cortex-debug.JLinkGDBServerPath": "/opt/SEGGER/JLink/JLinkGDBServerCLExe",

Try Other Examples

More examples can be found in Examples folder, copy and replace the files under User folder to try different examples.

Links

Puya Product Page(Datasheet download): https://www.puyasemi.com/mcu_weichuliqi.html

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

py32f0-template

Puya PY32F0 Family

PY32F002B

PY32F0xx

PY32F07x

File Structure

Requirements

Building

1. Install GNU Arm Embedded Toolchain

2. Clone This Repository

3. Install SEGGER J-Link Or PyOCD

Option 1: Install SEGGER J-Link

Option 2: Install PyOCD

4. Edit Makefile

5. Compiling And Flashing

Debugging In VSCode

Try Other Examples

Links

About

Releases

Packages

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 259 Commits
Examples		Examples
Libraries		Libraries
Misc		Misc
User		User
.gitignore		.gitignore
Makefile		Makefile
README.md		README.md
rules.mk		rules.mk

thonyek/py32f0-template

Folders and files

Latest commit

History

Repository files navigation

py32f0-template

Puya PY32F0 Family

PY32F002B

PY32F0xx

PY32F07x

File Structure

Requirements

Building

1. Install GNU Arm Embedded Toolchain

2. Clone This Repository

3. Install SEGGER J-Link Or PyOCD

Option 1: Install SEGGER J-Link

Option 2: Install PyOCD

4. Edit Makefile

5. Compiling And Flashing

Debugging In VSCode

Try Other Examples

Links

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages