[PW_SID:922834] Expand firmware-name property to load specific #2055
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This patch adds workflow files for ci: [schedule_work.yml] - The workflow file for scheduled work - Sync the repo with upstream repo and rebase the workflow branch - Review the patches in the patchwork and creates the PR if needed [ci.yml] - The workflow file for CI tasks - Run CI tests when PR is created
Expand the firmware-name property to specify the names of NVM and rampatch firmware to load. This update will support loading specific firmware (nvm and rampatch) for certain chips, like the QCA6698 Bluetooth chip, which shares the same IP core as the WCN6855 but has different RF components and RAM sizes, requiring new firmware files. We might use different connectivity boards on the same platform. For example, QCA6698-based boards can support either a two-antenna or three-antenna solution, both of which work on the sa8775p-ride platform. Due to differences in connectivity boards and variations in RF performance from different foundries, different NVM configurations are used based on the board ID. So In firmware-name, if the NVM file has an extension, the NVM file will be used. Otherwise, the system will first try the .bNN (board ID) file, and if that fails, it will fall back to the .bin file. Possible configurations: firmware-name = "QCA6698/hpnv21.bin", "QCA6698/hpbtfw21.tlv"; firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv"; firmware-name = "QCA6698/hpnv21.bin"; Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Cheng Jiang <[email protected]>
Different connectivity boards may be attached to the same platform. For example, QCA6698-based boards can support either a two-antenna or three-antenna solution, both of which work on the sa8775p-ride platform. Due to differences in connectivity boards and variations in RF performance from different foundries, different NVM configurations are used based on the board ID. Therefore, in the firmware-name property, if the NVM file has an extension, the NVM file will be used. Otherwise, the system will first try the .bNN (board ID) file, and if that fails, it will fall back to the .bin file. Possible configurations: firmware-name = "QCA6698/hpnv21"; firmware-name = "QCA6698/hpnv21.bin"; Signed-off-by: Cheng Jiang <[email protected]>
The firmware-name property has been expanded to specify the names of NVM and rampatch firmware for certain chips, such as the QCA6698 Bluetooth chip. Although it shares the same IP core as the WCN6855, the QCA6698 has different RF components and RAM sizes, necessitating new firmware files. This change allows for the configuration of NVM and rampatch in DT. Possible configurations: firmware-name = QCA6698/hpnv21.bin, QCA6698/hpbtfw21.tlv; firmware-name = QCA6698/hpnv21, QCA6698/hpbtfw21.tlv; Signed-off-by: Cheng Jiang <[email protected]>
github-actions
bot
force-pushed
the
workflow
branch
from
3e2b737 to
99a4870
Compare
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Expand the firmware-name property to specify the names of NVM and
rampatch firmware to load. This update will support loading specific
firmware (nvm and rampatch) for certain chips, like the QCA6698
Bluetooth chip, which shares the same IP core as the WCN6855 but has
different RF components and RAM sizes, requiring new firmware files.
We might use different connectivity boards on the same platform. For
example, QCA6698-based boards can support either a two-antenna or
three-antenna solution, both of which work on the sa8775p-ride platform.
Due to differences in connectivity boards and variations in RF
performance from different foundries, different NVM configurations are
used based on the board ID.
So In firmware-name, if the NVM file has an extension, the NVM file will
be used. Otherwise, the system will first try the .bNN (board ID) file,
and if that fails, it will fall back to the .bin file.
Possible configurations:
firmware-name = "QCA6698/hpnv21.bin", "QCA6698/hpbtfw21.tlv";
firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
firmware-name = "QCA6698/hpnv21.bin";
Acked-by: Krzysztof Kozlowski [email protected]
Signed-off-by: Cheng Jiang [email protected]
.../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)