Milter for Sendmail or Postfix to log all possible parts of the e-Mail communication, written in Python.
The project was based on the great work of Stuart D. Gathman ([email protected]) sdgathman/pymilter
The exection of the Python file with the option -h or --help with following command, will show you all options you can set, to start the InfoMilter.py:
# python3 InfoMilter.py -h
usage: InfoMilter.py [-h] -l <IPv4> -p <1..65535> [-v]
Copyright (c) 2019 Klaus Tachtler. All Rights Reserved.
Milter for Sendmail or Postfix to log all possible parts of the e-Mail
communication, written in Python.
pymilter is an Open Source implementation of the Sendmail milter protocol,
for implementing milters in Python that can interface with the Sendmail or
Postfix MTA.
Python implementation of the Sendmail Milter protocol based on the project
of pymilter from Stuart D. Gathman ([email protected]).
Created by Klaus Tachtler <[email protected]> on 2019-09-10.
Copyright (c) Klaus Tachtler. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you
may not use this file except in compliance with the License. You may
obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied. See the License for the specific language governing
permissions and limitations under the License.
Distributed on an "AS IS" basis without warranties
or conditions of any kind, either express or implied.
USAGE
required arguments:
-l <IPv4>, --listener <IPv4>
IPv4-Address where the milter is listening
-p <1..65535>, --port <1..65535>
Port where the milter is listening
optional arguments:
-h, --help show this help message and exit
-v, --version show program's version number and exitThe following dependencie are required
# pip3 list --format=columns
Package Version
---------- -----------
ipaddress 1.0.22
log4p 2019.7.13.3
pymilter 1.0.3Under CentOS-7 the following commands can be used to fulfill the dependencies:
# yum install python36 python36-libs python36-devel python36-pip
# yum install python36-pymilter
# pip3 install log4p
# pip3 install ipaddressThe execution of the Python file could be done, for example on a Linux shell with following command:
# python3 InfoMilter.py -l 127.0.0.1 -p 10099
2019-09-09 20:39:43,293 - __main__ - INFO - InfoMilter.py milter startup
2019-09-09 20:39:43,294 - __main__ - INFO - ========================================
2019-09-09 20:39:43,294 - __main__ - INFO - milter version : 1.0.1
2019-09-09 20:39:43,294 - __main__ - INFO - milter listener : 127.0.0.1
2019-09-09 20:39:43,294 - __main__ - INFO - milter port : 10099
2019-09-09 20:39:43,294 - __main__ - INFO - ========================================
^C
2019-09-09 20:39:48,297 - __main__ - INFO - ========================================
2019-09-09 20:39:48,297 - __main__ - INFO - InfoMilter.py milter shutdownand could be stopped with [CTRL-c] key combination.
Under Linux, you can see with following command, on which ipv4-address and port the InfoMilter.py was bind to:
# netstat -tulpen | grep python3
tcp 0 0 127.0.0.1:10099 0.0.0.0:* LISTEN 0 1077235 10641/python3In order to include InforMilter.py with , minimal adjustments are required in the two following configuration files of Postfix.
/etc/postfix/main.cf/etc/postfix/master.cf
(Only relevant part of the configuration file!)
# --------------------------------------------------------------------------------
# New - http://www.postfix.org/MILTER_README.html
# MILTER CONFIGURATIONS
# --------------------------------------------------------------------------------
# pymilter-InfoMilter (info_milter)
info_milter = inet:127.0.0.1:10099
(Only relevant part of the configuration file!)
#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - n - - smtpd
# InfoMilter
-o smtpd_milters=${info_milter}
âť— After the changes in the configuration files, you have to restart the Postfix Daemon!
The following telnet session will show you the usage of the InfoMilter.py in combination with telnet.
# telnet 127.0.0.1 25
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
220 pml125.home.tachtler.net ESMTP Postfix
ehlo localhost
250-pml125.home.tachtler.net
250-PIPELINING
250-SIZE 10240000
250-VRFY
250-ETRN
250-ENHANCEDSTATUSCODES
250-8BITMIME
250-DSN
250-SMTPUTF8
250 CHUNKING
mail from: <root@localhost>
250 2.1.0 Ok
rcpt to: <klaus@localhost>
250 2.1.5 Ok
data
354 End data with <CR><LF>.<CR><LF>
Subject: Test e-Mail.
From: [email protected]
To: [email protected]
Hello,
test e-Mail.
Greetings
.
250 2.0.0 Ok: queued as 40B391109F84
quit
221 2.0.0 Bye
Connection closed by foreign host.While using the InfoMilter.py the following output will be written to the standard command output (screen / shell) and a folder named logs will be created, which includes the InfoMilter-debug.log file and InfoMilter-errors.log.
An example output file could be look like this. (It's based on the Telnet e-Mail-Test - telnet-session shown above):
# python3 InfoMilter.py -l 127.0.0.1 -p 10099
2019-09-10 15:43:59,454 - __main__ - INFO - InfoMilter.py milter startup
2019-09-10 15:43:59,454 - __main__ - INFO - ========================================
2019-09-10 15:43:59,454 - __main__ - INFO - milter version : 1.0.1
2019-09-10 15:43:59,454 - __main__ - INFO - milter listener : 127.0.0.1
2019-09-10 15:43:59,454 - __main__ - INFO - milter port : 10099
2019-09-10 15:43:59,454 - __main__ - INFO - ========================================
2019-09-10 15:47:08,541 - __main__ - INFO - ========================================
2019-09-10 15:47:08,542 - __main__ - INFO - sendmail-pymilter - ENTRY: connect :
2019-09-10 15:47:08,542 - __main__ - INFO - ----------------------------------------
2019-09-10 15:47:08,542 - __main__ - INFO - hostname : localhost
2019-09-10 15:47:08,542 - __main__ - INFO - family : 2
2019-09-10 15:47:08,542 - __main__ - INFO - - family : IPv4 (socket.AF_INET)
2019-09-10 15:47:08,542 - __main__ - INFO - hostaddr : ('127.0.0.1', 44750)
2019-09-10 15:47:08,542 - __main__ - INFO - - address : 127.0.0.1
2019-09-10 15:47:08,543 - __main__ - INFO - - port : 44750
2019-09-10 15:47:08,543 - __main__ - INFO - ----------------------------------------
2019-09-10 15:47:08,543 - __main__ - INFO - self.getsymval('{client_connections}') : None
2019-09-10 15:47:08,543 - __main__ - INFO - self.getsymval('{client_ptr}') : None
2019-09-10 15:47:08,543 - __main__ - INFO - self.getsymval('{if_addr}') : None
2019-09-10 15:47:08,543 - __main__ - INFO - self.getsymval('{if_name}') : None
2019-09-10 15:47:08,543 - __main__ - INFO - ----------------------------------------
2019-09-10 15:47:08,543 - __main__ - INFO - self.getsymval('{j}') : pml125.home.tachtler.net
2019-09-10 15:47:08,544 - __main__ - INFO - self.getsymval('{_}') : None
2019-09-10 15:47:08,544 - __main__ - INFO - self.getsymval('{client_addr}') : None
2019-09-10 15:47:08,544 - __main__ - INFO - self.getsymval('{client_name}') : None
2019-09-10 15:47:08,544 - __main__ - INFO - self.getsymval('{client_port}') : None
2019-09-10 15:47:08,544 - __main__ - INFO - self.getsymval('{daemon_addr}') : 127.0.0.1
2019-09-10 15:47:08,544 - __main__ - INFO - self.getsymval('{daemon_name}') : pml125.home.tachtler.net
2019-09-10 15:47:08,544 - __main__ - INFO - self.getsymval('{daemon_port}') : None
2019-09-10 15:47:08,545 - __main__ - INFO - self.getsymval('{v}') : Postfix 3.4.6
2019-09-10 15:47:08,545 - __main__ - INFO - ----------------------------------------
2019-09-10 15:47:08,545 - __main__ - INFO - sendmail-pymilter - LEAVE: connect :
2019-09-10 15:47:08,545 - __main__ - INFO - ========================================
2019-09-10 15:47:48,435 - __main__ - INFO - ========================================
2019-09-10 15:47:48,436 - __main__ - INFO - sendmail-pymilter - ENTRY: helo/ehlo :
2019-09-10 15:47:48,436 - __main__ - INFO - ----------------------------------------
2019-09-10 15:47:48,436 - __main__ - INFO - heloname : localhost
2019-09-10 15:47:48,436 - __main__ - INFO - ----------------------------------------
2019-09-10 15:47:48,436 - __main__ - INFO - self.getsymval('{client_ptr}') : None
2019-09-10 15:47:48,436 - __main__ - INFO - self.getsymval('{cert_issuer} ') : None
2019-09-10 15:47:48,436 - __main__ - INFO - self.getsymval('{cert_subject}') : None
2019-09-10 15:47:48,437 - __main__ - INFO - self.getsymval('{cipher_bits}') : None
2019-09-10 15:47:48,437 - __main__ - INFO - self.getsymval('{cipher}') : None
2019-09-10 15:47:48,437 - __main__ - INFO - self.getsymval('{tls_version}') : None
2019-09-10 15:47:48,437 - __main__ - INFO - ----------------------------------------
2019-09-10 15:47:48,437 - __main__ - INFO - self.getsymval('{j}') : pml125.home.tachtler.net
2019-09-10 15:47:48,437 - __main__ - INFO - self.getsymval('{_}') : None
2019-09-10 15:47:48,437 - __main__ - INFO - self.getsymval('{client_addr}') : None
2019-09-10 15:47:48,437 - __main__ - INFO - self.getsymval('{client_name}') : None
2019-09-10 15:47:48,437 - __main__ - INFO - self.getsymval('{client_port}') : None
2019-09-10 15:47:48,438 - __main__ - INFO - self.getsymval('{daemon_addr}') : 127.0.0.1
2019-09-10 15:47:48,438 - __main__ - INFO - self.getsymval('{daemon_name}') : pml125.home.tachtler.net
2019-09-10 15:47:48,438 - __main__ - INFO - self.getsymval('{daemon_port}') : None
2019-09-10 15:47:48,438 - __main__ - INFO - self.getsymval('{v}') : Postfix 3.4.6
2019-09-10 15:47:48,438 - __main__ - INFO - ----------------------------------------
2019-09-10 15:47:48,438 - __main__ - INFO - sendmail-pymilter - LEAVE: helo/ehlo :
2019-09-10 15:47:48,438 - __main__ - INFO - ========================================
2019-09-10 15:47:58,748 - __main__ - INFO - ========================================
2019-09-10 15:47:58,748 - __main__ - INFO - sendmail-pymilter - ENTRY: envfrom :
2019-09-10 15:47:58,748 - __main__ - INFO - ----------------------------------------
2019-09-10 15:47:58,748 - __main__ - INFO - mailfrom : <root@localhost>
2019-09-10 15:47:58,748 - __main__ - INFO - - parameter : ()
2019-09-10 15:47:58,748 - __main__ - INFO - ----------------------------------------
2019-09-10 15:47:58,748 - __main__ - INFO - self.getsymval('{auth_authen}') : None
2019-09-10 15:47:58,748 - __main__ - INFO - self.getsymval('{auth_author} ') : None
2019-09-10 15:47:58,749 - __main__ - INFO - self.getsymval('{auth_type} ') : None
2019-09-10 15:47:58,749 - __main__ - INFO - self.getsymval('{cert_issuer} ') : None
2019-09-10 15:47:58,749 - __main__ - INFO - self.getsymval('{cert_subject}') : None
2019-09-10 15:47:58,749 - __main__ - INFO - self.getsymval('{cipher_bits}') : None
2019-09-10 15:47:58,749 - __main__ - INFO - self.getsymval('{cipher}') : None
2019-09-10 15:47:58,749 - __main__ - INFO - self.getsymval('{tls_version}') : None
2019-09-10 15:47:58,749 - __main__ - INFO - self.getsymval('{mail_addr}') : root@localhost
2019-09-10 15:47:58,749 - __main__ - INFO - self.getsymval('{mail_host}') : pml125.home.tachtler.net
2019-09-10 15:47:58,750 - __main__ - INFO - self.getsymval('{mail_mailer}') : local
2019-09-10 15:47:58,750 - __main__ - INFO - ----------------------------------------
2019-09-10 15:47:58,750 - __main__ - INFO - self.getsymval('{j}') : pml125.home.tachtler.net
2019-09-10 15:47:58,750 - __main__ - INFO - self.getsymval('{_}') : None
2019-09-10 15:47:58,750 - __main__ - INFO - self.getsymval('{client_addr}') : None
2019-09-10 15:47:58,750 - __main__ - INFO - self.getsymval('{client_name}') : None
2019-09-10 15:47:58,750 - __main__ - INFO - self.getsymval('{client_port}') : None
2019-09-10 15:47:58,750 - __main__ - INFO - self.getsymval('{daemon_addr}') : 127.0.0.1
2019-09-10 15:47:58,750 - __main__ - INFO - self.getsymval('{daemon_name}') : pml125.home.tachtler.net
2019-09-10 15:47:58,751 - __main__ - INFO - self.getsymval('{daemon_port}') : None
2019-09-10 15:47:58,751 - __main__ - INFO - self.getsymval('{v}') : Postfix 3.4.6
2019-09-10 15:47:58,751 - __main__ - INFO - ----------------------------------------
2019-09-10 15:47:58,751 - __main__ - INFO - sendmail-pymilter - LEAVE: envfrom :
2019-09-10 15:47:58,751 - __main__ - INFO - ========================================
2019-09-10 15:48:05,246 - __main__ - INFO - ========================================
2019-09-10 15:48:05,247 - __main__ - INFO - sendmail-pymilter - ENTRY: envrcpt :
2019-09-10 15:48:05,247 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:05,247 - __main__ - INFO - mailto : <klaus@localhost>
2019-09-10 15:48:05,247 - __main__ - INFO - - parameter : ()
2019-09-10 15:48:05,247 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:05,247 - __main__ - INFO - self.getsymval('{rcpt_addr}') : klaus@localhost
2019-09-10 15:48:05,247 - __main__ - INFO - self.getsymval('{rcpt_host}') : pml125.home.tachtler.net
2019-09-10 15:48:05,247 - __main__ - INFO - self.getsymval('{rcpt_mailer}') : local
2019-09-10 15:48:05,247 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:05,248 - __main__ - INFO - self.getsymval('{j}') : pml125.home.tachtler.net
2019-09-10 15:48:05,248 - __main__ - INFO - self.getsymval('{_}') : None
2019-09-10 15:48:05,248 - __main__ - INFO - self.getsymval('{client_addr}') : None
2019-09-10 15:48:05,248 - __main__ - INFO - self.getsymval('{client_name}') : None
2019-09-10 15:48:05,248 - __main__ - INFO - self.getsymval('{client_port}') : None
2019-09-10 15:48:05,248 - __main__ - INFO - self.getsymval('{daemon_addr}') : 127.0.0.1
2019-09-10 15:48:05,248 - __main__ - INFO - self.getsymval('{daemon_name}') : pml125.home.tachtler.net
2019-09-10 15:48:05,248 - __main__ - INFO - self.getsymval('{daemon_port}') : None
2019-09-10 15:48:05,248 - __main__ - INFO - self.getsymval('{v}') : Postfix 3.4.6
2019-09-10 15:48:05,249 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:05,249 - __main__ - INFO - sendmail-pymilter - LEAVE: envrcpt :
2019-09-10 15:48:05,249 - __main__ - INFO - ========================================
2019-09-10 15:48:05,249 - __main__ - INFO - ========================================
2019-09-10 15:48:05,249 - __main__ - INFO - sendmail-pymilter - ENTRY: header :
2019-09-10 15:48:05,249 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:37,413 - __main__ - INFO - field => value : Subject: Test e-Mail.
2019-09-10 15:48:37,413 - __main__ - INFO - field => value : From: [email protected]
2019-09-10 15:48:37,414 - __main__ - INFO - field => value : To: [email protected]
2019-09-10 15:48:37,414 - __main__ - INFO - field => value : Message-Id: <[email protected]>
2019-09-10 15:48:37,414 - __main__ - INFO - field => value : Date: Tue, 10 Sep 2019 15:47:58 +0200 (CEST)
2019-09-10 15:48:37,415 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:37,415 - __main__ - INFO - self.getsymval('{i}') : 40B391109F84
2019-09-10 15:48:37,415 - __main__ - INFO - self.getsymval('{client_ptr}') : None
2019-09-10 15:48:37,415 - __main__ - INFO - self.getsymval('{auth_authen}') : None
2019-09-10 15:48:37,415 - __main__ - INFO - self.getsymval('{auth_author} ') : None
2019-09-10 15:48:37,415 - __main__ - INFO - self.getsymval('{auth_type} ') : None
2019-09-10 15:48:37,415 - __main__ - INFO - self.getsymval('{cert_issuer} ') : None
2019-09-10 15:48:37,416 - __main__ - INFO - self.getsymval('{cert_subject}') : None
2019-09-10 15:48:37,416 - __main__ - INFO - self.getsymval('{cipher_bits}') : None
2019-09-10 15:48:37,416 - __main__ - INFO - self.getsymval('{cipher}') : None
2019-09-10 15:48:37,416 - __main__ - INFO - self.getsymval('{tls_version}') : None
2019-09-10 15:48:37,416 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:37,416 - __main__ - INFO - self.getsymval('{j}') : pml125.home.tachtler.net
2019-09-10 15:48:37,416 - __main__ - INFO - self.getsymval('{_}') : None
2019-09-10 15:48:37,416 - __main__ - INFO - self.getsymval('{client_addr}') : None
2019-09-10 15:48:37,416 - __main__ - INFO - self.getsymval('{client_name}') : None
2019-09-10 15:48:37,417 - __main__ - INFO - self.getsymval('{client_port}') : None
2019-09-10 15:48:37,417 - __main__ - INFO - self.getsymval('{daemon_addr}') : 127.0.0.1
2019-09-10 15:48:37,417 - __main__ - INFO - self.getsymval('{daemon_name}') : pml125.home.tachtler.net
2019-09-10 15:48:37,417 - __main__ - INFO - self.getsymval('{daemon_port}') : None
2019-09-10 15:48:37,417 - __main__ - INFO - self.getsymval('{v}') : Postfix 3.4.6
2019-09-10 15:48:37,417 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:37,417 - __main__ - INFO - sendmail-pymilter - LEAVE: header :
2019-09-10 15:48:37,417 - __main__ - INFO - ========================================
2019-09-10 15:48:37,418 - __main__ - INFO - ========================================
2019-09-10 15:48:37,418 - __main__ - INFO - sendmail-pymilter - ENTRY: eoh :
2019-09-10 15:48:37,418 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:37,418 - __main__ - INFO - self.getsymval('{i}') : 40B391109F84
2019-09-10 15:48:37,418 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:37,418 - __main__ - INFO - self.getsymval('{j}') : pml125.home.tachtler.net
2019-09-10 15:48:37,418 - __main__ - INFO - self.getsymval('{_}') : None
2019-09-10 15:48:37,418 - __main__ - INFO - self.getsymval('{client_addr}') : None
2019-09-10 15:48:37,418 - __main__ - INFO - self.getsymval('{client_name}') : None
2019-09-10 15:48:37,419 - __main__ - INFO - self.getsymval('{client_port}') : None
2019-09-10 15:48:37,419 - __main__ - INFO - self.getsymval('{daemon_addr}') : 127.0.0.1
2019-09-10 15:48:37,419 - __main__ - INFO - self.getsymval('{daemon_name}') : pml125.home.tachtler.net
2019-09-10 15:48:37,419 - __main__ - INFO - self.getsymval('{daemon_port}') : None
2019-09-10 15:48:37,419 - __main__ - INFO - self.getsymval('{v}') : Postfix 3.4.6
2019-09-10 15:48:37,419 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:37,419 - __main__ - INFO - sendmail-pymilter - LEAVE: eoh :
2019-09-10 15:48:37,419 - __main__ - INFO - ========================================
2019-09-10 15:48:37,420 - __main__ - INFO - ========================================
2019-09-10 15:48:37,420 - __main__ - INFO - sendmail-pymilter - ENTRY: body :
2019-09-10 15:48:37,420 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:37,420 - __main__ - INFO - body : b'Hello,\r\n\r\ntest e-Mail.\r\n\r\nGreetings\r\n'
2019-09-10 15:48:37,420 - __main__ - INFO - - decoded (UTF-8) : Hello,
test e-Mail.
Greetings
2019-09-10 15:48:37,420 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:37,421 - __main__ - INFO - self.getsymval('{j}') : pml125.home.tachtler.net
2019-09-10 15:48:37,421 - __main__ - INFO - self.getsymval('{_}') : None
2019-09-10 15:48:37,421 - __main__ - INFO - self.getsymval('{client_addr}') : None
2019-09-10 15:48:37,421 - __main__ - INFO - self.getsymval('{client_name}') : None
2019-09-10 15:48:37,421 - __main__ - INFO - self.getsymval('{client_port}') : None
2019-09-10 15:48:37,421 - __main__ - INFO - self.getsymval('{daemon_addr}') : 127.0.0.1
2019-09-10 15:48:37,421 - __main__ - INFO - self.getsymval('{daemon_name}') : pml125.home.tachtler.net
2019-09-10 15:48:37,421 - __main__ - INFO - self.getsymval('{daemon_port}') : None
2019-09-10 15:48:37,422 - __main__ - INFO - self.getsymval('{v}') : Postfix 3.4.6
2019-09-10 15:48:37,422 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:37,422 - __main__ - INFO - sendmail-pymilter - LEAVE: body :
2019-09-10 15:48:37,422 - __main__ - INFO - ========================================
2019-09-10 15:48:37,422 - __main__ - INFO - ========================================
2019-09-10 15:48:37,422 - __main__ - INFO - sendmail-pymilter - ENTRY: eom :
2019-09-10 15:48:37,422 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:37,423 - __main__ - INFO - self.getsymval('{i}') : 40B391109F84
2019-09-10 15:48:37,423 - __main__ - INFO - self.getsymval('{auth_authen}') : None
2019-09-10 15:48:37,423 - __main__ - INFO - self.getsymval('{auth_author} ') : None
2019-09-10 15:48:37,423 - __main__ - INFO - self.getsymval('{auth_type} ') : None
2019-09-10 15:48:37,423 - __main__ - INFO - self.getsymval('{cert_issuer} ') : None
2019-09-10 15:48:37,423 - __main__ - INFO - self.getsymval('{cert_subject}') : None
2019-09-10 15:48:37,423 - __main__ - INFO - self.getsymval('{cipher_bits}') : None
2019-09-10 15:48:37,424 - __main__ - INFO - self.getsymval('{cipher}') : None
2019-09-10 15:48:37,424 - __main__ - INFO - self.getsymval('{tls_version}') : None
2019-09-10 15:48:37,424 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:37,424 - __main__ - INFO - self.getsymval('{j}') : pml125.home.tachtler.net
2019-09-10 15:48:37,424 - __main__ - INFO - self.getsymval('{_}') : None
2019-09-10 15:48:37,424 - __main__ - INFO - self.getsymval('{client_addr}') : None
2019-09-10 15:48:37,424 - __main__ - INFO - self.getsymval('{client_name}') : None
2019-09-10 15:48:37,424 - __main__ - INFO - self.getsymval('{client_port}') : None
2019-09-10 15:48:37,425 - __main__ - INFO - self.getsymval('{daemon_addr}') : 127.0.0.1
2019-09-10 15:48:37,425 - __main__ - INFO - self.getsymval('{daemon_name}') : pml125.home.tachtler.net
2019-09-10 15:48:37,425 - __main__ - INFO - self.getsymval('{daemon_port}') : None
2019-09-10 15:48:37,425 - __main__ - INFO - self.getsymval('{v}') : Postfix 3.4.6
2019-09-10 15:48:37,425 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:37,425 - __main__ - INFO - sendmail-pymilter - LEAVE: eom :
2019-09-10 15:48:37,425 - __main__ - INFO - ========================================
2019-09-10 15:48:44,699 - __main__ - INFO - ========================================
2019-09-10 15:48:44,700 - __main__ - INFO - sendmail-pymilter - ENTRY: close :
2019-09-10 15:48:44,700 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:44,700 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:44,700 - __main__ - INFO - self.getsymval('{j}') : pml125.home.tachtler.net
2019-09-10 15:48:44,700 - __main__ - INFO - self.getsymval('{_}') : None
2019-09-10 15:48:44,700 - __main__ - INFO - self.getsymval('{client_addr}') : None
2019-09-10 15:48:44,700 - __main__ - INFO - self.getsymval('{client_name}') : None
2019-09-10 15:48:44,700 - __main__ - INFO - self.getsymval('{client_port}') : None
2019-09-10 15:48:44,701 - __main__ - INFO - self.getsymval('{daemon_addr}') : 127.0.0.1
2019-09-10 15:48:44,701 - __main__ - INFO - self.getsymval('{daemon_name}') : pml125.home.tachtler.net
2019-09-10 15:48:44,701 - __main__ - INFO - self.getsymval('{daemon_port}') : None
2019-09-10 15:48:44,701 - __main__ - INFO - self.getsymval('{v}') : Postfix 3.4.6
2019-09-10 15:48:44,701 - __main__ - INFO - ----------------------------------------
2019-09-10 15:48:44,701 - __main__ - INFO - sendmail-pymilter - LEAVE: close :
2019-09-10 15:48:44,701 - __main__ - INFO - ========================================
^C
2019-09-10 15:48:53,637 - __main__ - INFO - ========================================
2019-09-10 15:48:53,638 - __main__ - INFO - InfoMilter.py milter shutdown
A list of possible changes for the future:
- Add a setup.py file
Many thanks for the great work, support and help to realize this project:
- Stuart D. Gathman ([email protected]) sdgathman/pymilter