Skip to content

bump chart to 0.6.2 #243

bump chart to 0.6.2

bump chart to 0.6.2 #243

Workflow file for this run

# Copyright 2024 StreamNative
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
name: Chart Test
on:
pull_request:
branches:
- '*'
paths:
- 'charts/**'
- '.github/workflows/chart-test.yml'
jobs:
lint-test:
runs-on: ubuntu-latest
outputs:
changed: ${{ steps.list-changed.outputs.changed }}
chart_name: ${{ steps.list-changed.outputs.chart_name }}
steps:
- name: Checkout
uses: actions/checkout@v3
with:
fetch-depth: 0
- name: Check if the CRDs are update to date
run: |
diff config/crd/bases/resource.streamnative.io_pulsarconnections.yaml charts/pulsar-resources-operator/crds/resource.streamnative.io_pulsarconnections.yaml && \
diff config/crd/bases/resource.streamnative.io_pulsargeoreplications.yaml charts/pulsar-resources-operator/crds/resource.streamnative.io_pulsargeoreplications.yaml && \
diff config/crd/bases/resource.streamnative.io_pulsarnamespaces.yaml charts/pulsar-resources-operator/crds/resource.streamnative.io_pulsarnamespaces.yaml && \
diff config/crd/bases/resource.streamnative.io_pulsarpermissions.yaml charts/pulsar-resources-operator/crds/resource.streamnative.io_pulsarpermissions.yaml && \
diff config/crd/bases/resource.streamnative.io_pulsartenants.yaml charts/pulsar-resources-operator/crds/resource.streamnative.io_pulsartenants.yaml && \
diff config/crd/bases/resource.streamnative.io_pulsarfunctions.yaml charts/pulsar-resources-operator/crds/resource.streamnative.io_pulsarfunctions.yaml && \
diff config/crd/bases/resource.streamnative.io_pulsarsinks.yaml charts/pulsar-resources-operator/crds/resource.streamnative.io_pulsarsinks.yaml && \
diff config/crd/bases/resource.streamnative.io_pulsarsources.yaml charts/pulsar-resources-operator/crds/resource.streamnative.io_pulsarsources.yaml && \
diff config/crd/bases/resource.streamnative.io_pulsarpackages.yaml charts/pulsar-resources-operator/crds/resource.streamnative.io_pulsarpackages.yaml && \
diff config/crd/bases/resource.streamnative.io_pulsartopics.yaml charts/pulsar-resources-operator/crds/resource.streamnative.io_pulsartopics.yaml
- name: Set up Helm
uses: azure/setup-helm@v3
with:
version: v3.12.3
- name: Install plugin unittest
run: |
helm plugin install https://github.com/quintush/helm-unittest
# Python is required because `ct lint` runs Yamale (https://github.com/23andMe/Yamale) and
# yamllint (https://github.com/adrienverge/yamllint) which require Python
- name: Set up Python
uses: actions/setup-python@v4
with:
python-version: '3.10'
- name: Set up chart-testing
uses: helm/[email protected]
- name: Run chart-testing (list-changed)
id: list-changed
run: |
chart_name=$(ct list-changed --config ct.yaml | grep -v '>>>' || echo '')
if [[ -n "$chart_name" ]]; then
echo "changed=true" >> $GITHUB_OUTPUT
echo "chart_name=$chart_name" >> $GITHUB_OUTPUT
else
echo "changed=false" >> $GITHUB_OUTPUT
echo "chart_name=$chart_name" >> $GITHUB_OUTPUT
fi
- name: Run chart-testing (lint)
run: ct lint --config ct.yaml
- name: Run template test
if: steps.list-changed.outputs.changed == 'true'
run: |
for i in v1.20.0 v1.21.0 v1.22.0 v1.23.0 v1.24.0 v1.25.0 v1.26.0 v1.27.0
do
helm template test ${{ steps.list-changed.outputs.chart_name }} --kube-version $i> $i.yaml
yamllint $i.yaml --config-file lintconf.yaml
done
- name: Setup tmate session
uses: mxschmitt/action-tmate@v3
timeout-minutes: 10
if: failure()
install-on-v1-26:
runs-on: ubuntu-latest
needs: lint-test
steps:
- name: Checkout
uses: actions/checkout@v3
with:
fetch-depth: 0
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: clean disk
run: |
df -h
sudo swapoff -a
sudo rm -rf /swapfile /usr/share/dotnet /usr/local/lib/android /opt/ghc "$AGENT_TOOLSDIRECTORY"
sudo apt clean
docker rmi $(docker images -q) -f
df -h
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Set up Helm
uses: azure/setup-helm@v3
with:
version: v3.12.3
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- uses: actions/setup-python@v4
with:
python-version: 3.9
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Set up chart-testing
uses: helm/[email protected]
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Create kind cluster
uses: helm/[email protected]
with:
node_image: kindest/node:v1.26.6
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Run chart-testing (install)
run: ct install --debug --config ct.yaml --print-config --charts ${{ needs.lint-test.outputs.chart_name }}
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Setup tmate session
uses: mxschmitt/action-tmate@v3
timeout-minutes: 10
if: failure()
install-on-v1-27:
runs-on: ubuntu-latest
needs: lint-test
steps:
- name: Checkout
uses: actions/checkout@v3
with:
fetch-depth: 0
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: clean disk
run: |
df -h
sudo swapoff -a
sudo rm -rf /swapfile /usr/share/dotnet /usr/local/lib/android /opt/ghc "$AGENT_TOOLSDIRECTORY"
sudo apt clean
docker rmi $(docker images -q) -f
df -h
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Set up Helm
uses: azure/setup-helm@v3
with:
version: v3.12.3
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- uses: actions/setup-python@v4
with:
python-version: 3.9
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Set up chart-testing
uses: helm/[email protected]
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Create kind cluster
uses: helm/[email protected]
with:
node_image: kindest/node:v1.27.13
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Run chart-testing (install)
run: ct install --debug --config ct.yaml --print-config --charts ${{ needs.lint-test.outputs.chart_name }}
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Setup tmate session
uses: mxschmitt/action-tmate@v3
timeout-minutes: 10
if: failure()
install-on-v1-28:
runs-on: ubuntu-latest
needs: lint-test
steps:
- name: Checkout
uses: actions/checkout@v3
with:
fetch-depth: 0
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: clean disk
run: |
df -h
sudo swapoff -a
sudo rm -rf /swapfile /usr/share/dotnet /usr/local/lib/android /opt/ghc "$AGENT_TOOLSDIRECTORY"
sudo apt clean
docker rmi $(docker images -q) -f
df -h
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Set up Helm
uses: azure/setup-helm@v3
with:
version: v3.12.3
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- uses: actions/setup-python@v4
with:
python-version: 3.9
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Set up chart-testing
uses: helm/[email protected]
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Create kind cluster
uses: helm/[email protected]
with:
node_image: kindest/node:v1.28.9
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Run chart-testing (install)
run: ct install --debug --config ct.yaml --print-config --charts ${{ needs.lint-test.outputs.chart_name }}
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Setup tmate session
uses: mxschmitt/action-tmate@v3
timeout-minutes: 10
if: failure()
install-on-v1-29:
runs-on: ubuntu-latest
needs: lint-test
steps:
- name: Checkout
uses: actions/checkout@v3
with:
fetch-depth: 0
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: clean disk
run: |
df -h
sudo swapoff -a
sudo rm -rf /swapfile /usr/share/dotnet /usr/local/lib/android /opt/ghc "$AGENT_TOOLSDIRECTORY"
sudo apt clean
docker rmi $(docker images -q) -f
df -h
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Set up Helm
uses: azure/setup-helm@v3
with:
version: v3.12.3
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- uses: actions/setup-python@v4
with:
python-version: 3.9
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Set up chart-testing
uses: helm/[email protected]
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Create kind cluster
uses: helm/[email protected]
with:
node_image: kindest/node:v1.29.4
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Run chart-testing (install)
run: ct install --debug --config ct.yaml --print-config --charts ${{ needs.lint-test.outputs.chart_name }}
if: ${{ needs.lint-test.outputs.changed == 'true' }}
- name: Setup tmate session
uses: mxschmitt/action-tmate@v3
timeout-minutes: 10
if: failure()