Tidy cargo doc warnings, fix links in rcc

src/adc.rs

@@ -1,7 +1,7 @@
 //! Analog to Digital Converter (ADC)
 //!
 //! ADC1 and ADC2 share a reset line. To initialise both of them, use the
-//! [`adc12`](adc12) method.
+//! [`adc12`] method.
 //!
 //! # Examples
 //!
@@ -999,7 +999,7 @@ macro_rules! adc_hal {
 
                 /// Set ADC sampling time
                 ///
-                /// Options can be found in [AdcSampleTime](crate::adc::AdcSampleTime).
+                /// Options can be found in [AdcSampleTime].
                 pub fn set_sample_time(&mut self, t_samp: AdcSampleTime) {
                     self.sample_time = t_samp;
                 }

src/delay.rs

@@ -1,11 +1,10 @@
 //! Delay providers
 //!
 //! There are currently two delay providers. In general you should prefer to use
-//! [Delay](Delay), however if you do not have access to `SYST` you can use
-//! [DelayFromCountDownTimer](DelayFromCountDownTimer) with any timer that
-//! implements the [CountDown](embedded_hal::timer::CountDown) trait. This can be
-//! useful if you're using [RTIC](https://rtic.rs)'s schedule API, which occupies
-//! the `SYST` peripheral.
+//! [Delay], however if you do not have access to `SYST` you can use
+//! [DelayFromCountDownTimer] with any timer that implements the [CountDown]
+//! trait. This can be useful if you're using [RTIC](https://rtic.rs)'s schedule
+//! API, which occupies the `SYST` peripheral.
 //!
 //! # Examples
 //!
@@ -68,7 +67,7 @@ pub struct Delay {
     syst: SYST,
 }
 
-/// Implements [CountDown](embedded_hal::timer::CountDown) for the System timer (SysTick).
+/// Implements [CountDown] for the System timer (SysTick).
 pub struct Countdown<'a> {
     clocks: CoreClocks,
     syst: &'a mut SYST,

src/dma/mdma.rs

@@ -44,10 +44,10 @@
 //! Unlike DMA1/DMA2, it is valid to assign the same request line to multiple
 //! MDMA streams. Additionally there are multiple requests lines to choose from
 //! for each target peripheral. For this reason, hardware request lines are
-//! specified as part of the [`MdmaConfig`](MdmaConfig) instead of being
-//! inferred from the peripheral type. If no hardware request line is specified,
-//! then the request line originates from software and the transfer is started
-//! immediately when [`enable`](Stream0#method.enable) is called.
+//! specified as part of the [`MdmaConfig`] instead of being inferred from the
+//! peripheral type. If no hardware request line is specified, then the request
+//! line originates from software and the transfer is started immediately when
+//! [`enable`](Stream0#method.enable) is called.
 //!
 //!
 

src/dma/mod.rs

@@ -19,14 +19,14 @@
 //!
 //! The following table summarizes the available DMA controllers
 //!
-//! | Controller | Accessible Memories | Peripheral [TargetAddress](traits::TargetAddress) Implementations | Double Buffering Supported ? | Number of DMA Streams | Initialization Method
+//! | Controller | Accessible Memories | Peripheral [TargetAddress] Implementations | Double Buffering Supported ? | Number of DMA Streams | Initialization Method
 //! | --- | --- | --- | --- | --- | ---
 //! | [MDMA](mdma) | All | `QUADSPI`, .. | No |16| [Transfer::init_master](Transfer#method.init_master)
 //! | [DMA1](dma) | AXISRAM, SRAM1/2/3/4 | all others [^notimpl] | Yes |8| [Transfer::init](Transfer#method.init)
 //! | [DMA2](dma) | AXISRAM, SRAM1/2/3/4 | all others [^notimpl] | Yes |8| [Transfer::init](Transfer#method.init)
 //! | [BDMA](bdma) | SRAM4 [^rm0455bdma] | `LPUART1`, `SPI6`, `I2C4`, `SAI4` | Yes |8| [Transfer::init](Transfer#method.init)
 //!
-//! [^notimpl]: [TargetAddress](traits::TargetAddress) is not yet implemented
+//! [^notimpl]: [TargetAddress] is not yet implemented
 //! for many peripherals
 //!
 //! [^rm0455bdma]: On 7B3/7A3/7B0 parts there are two BDMA controllers. BDMA1

src/lib.rs

@@ -46,7 +46,7 @@
 //!
 //! * [Direct Memory Access (DMA)](crate::dma)
 //! * [Cyclic Redundancy Check (CRC)](crate::crc) Feature gate `crc`
-//! * [Random Number Generator](crate::rng) ([rand_core::RngCore](rand_core::RngCore) is implemented under the `rand` feature gate)
+//! * [Random Number Generator](crate::rng) ([rand_core::RngCore] is implemented under the `rand` feature gate)
 //! * [Embedded Flash Memory](crate::flash)
 //! * [System Window Watchdog](crate::system_watchdog)
 //! * [Independent Watchdog](crate::independent_watchdog)

src/rcc/mod.rs

@@ -108,10 +108,9 @@
 //! # Peripherals
 //!
 //! The `freeze()` method returns a [Core Clocks Distribution and Reset
-//! (CCDR)](struct.Ccdr.html) object. This singleton tells you how the core
-//! clocks were actually configured (in [CoreClocks](struct.CoreClocks.html))
-//! and allows you to configure the remaining peripherals (see
-//! [PeripheralREC](crate::rcc::rec::struct.PeripheralREC.html)).
+//! (CCDR)](Ccdr) object. This singleton tells you how the core clocks were
+//! actually configured (in [CoreClocks]) and allows you to configure the
+//! remaining peripherals (see [PeripheralREC]).
 //!
 //!```rust
 //! let ccdr = ...; // Returned by `freeze()`, see examples above
@@ -126,7 +125,7 @@
 //! ccdr.peripheral.FDCAN.enable().reset();
 //!```
 //!
-//! The [PeripheralREC](struct.PeripheralREC.html) members implement move
+//! The [PeripheralREC] members implement move
 //! semantics, so once you have passed them to a constructor they cannot be
 //! modified again in safe Rust.
 //!