About

This is a Cluster API provider for the vcluster project - create fully functional virtual Kubernetes clusters.

Quick Start - Deploying Nginx in a Kind cluster

Can be found here

Installation instructions

Prerequisites:

• clusterctl (v1.1.5+)
• kubectl
• A Kubernetes cluster where you will have cluster-admin permissions
• Optional, depending on how you expose the vcluster instance - vcluster CLI

Install the vcluster provider

clusterctl init --infrastructure vcluster

Next you will generate a manifest file for a vcluster instance and create it in the management cluster. Cluster instance is configured using clusterctl parameters and environment variables - CHART_NAME, CHART_REPO, CHART_VERSION, VCLUSTER_HOST and VCLUSTER_PORT. In the example commands below, the HELM_VALUES variable will be populated with the contents of the values.yaml file.

export CLUSTER_NAME=vcluster
export CLUSTER_NAMESPACE=vcluster
export KUBERNETES_VERSION=1.23.0
export HELM_VALUES=""
# Uncomment if you want to use vcluster values
# export HELM_VALUES=$(cat devvalues.yaml | sed -z 's/\n/\\n/g')
kubectl create namespace ${CLUSTER_NAMESPACE}
clusterctl generate cluster ${CLUSTER_NAME} \
    --infrastructure vcluster \
    --kubernetes-version ${KUBERNETES_VERSION} \
    --target-namespace ${CLUSTER_NAMESPACE} | kubectl apply -f -

Now we just need to wait until vcluster custom resource reports ready status:

kubectl wait --for=condition=ready vcluster -n $CLUSTER_NAMESPACE $CLUSTER_NAME --timeout=300s

At this point the cluster is ready to be used. Please refer to the next chapter to get the credentials.

Note: at the moment, the provider is able to host vclusters only in the cluster where the vcluter provider is running(management cluster). Support for the remote host clusters is on our roadmap - spectrocloud/cluster-api-provider-vcluster#6.

How to connect to your vcluster

There are multiple methods for exposing your vcluster instance, and they are described in the vcluster docs. If you follow the docs exactly, you will need to use the vcluster CLI to retrieve kubeconfig. When using this CAPI provider you have an alternative - clusterctl get kubeconfig ${CLUSTER_NAME} --namespace ${CLUSTER_NAMESPACE} > ./kubeconfig.yaml, more details about this are in the CAPI docs. Virtual cluster kube config will be written to: ./kubeconfig.yaml. You can access the cluster via kubectl --kubeconfig ./kubeconfig.yaml get namespaces.

However, if you are not exposing the vcluster instance with an external hostname, but you want to connect to it from outside the cluster, you will need to use the vcluster CLI:

vcluster connect ${CLUSTER_NAME} -n ${CLUSTER_NAMESPACE}

vcluster custom resource example

With the clusterctl generate cluster command we are producing a manifest with two Kubernetes custom resources - Cluster (cluster.x-k8s.io/v1beta1) and VCluster (infrastructure.cluster.x-k8s.io/v1alpha1).
Below you may find an example of these two CRs with the comments explaining important fields.

apiVersion: cluster.x-k8s.io/v1beta1
kind: Cluster
metadata:
  name: ${CLUSTER_NAME}
spec:
  # Two *Ref fields below must reference VCluster CR by name
  # in order to conform to the CAPI contract   
  infrastructureRef:
    apiVersion: infrastructure.cluster.x-k8s.io/v1alpha1
    kind: VCluster
    # name field must match .metadata.name of the VCluster CR
    name: ${CLUSTER_NAME}
  controlPlaneRef:
    apiVersion: infrastructure.cluster.x-k8s.io/v1alpha1
    kind: VCluster
    # name field must match .metadata.name of the VCluster CR
    name: ${CLUSTER_NAME}
---
apiVersion: infrastructure.cluster.x-k8s.io/v1alpha1
kind: VCluster
metadata:
  name: ${CLUSTER_NAME}
spec:
  # Kubernetes version that should be used in this vcluster instance, e.g. "1.23".
  # The patch number from the version will be ignored, and the latest supported one
  # by the used chart will be installed.
  # Versions out of the supported range will be ignored, and earliest/latest supported
  # version will be used instead.
  kubernetesVersion: "1.24"

  # We are using vcluster Helm charts for the installation and upgrade.
  # The helmRelease sub-fields allow you to set Helm values and chart repo, name and version.
  # Sources of the charts can be found here - https://github.com/loft-sh/vcluster/tree/main/charts 
  #
  # This field, and all it's sub-fields, are optional.
  helmRelease:

    # The values field must contain a string with contents that would make a valid YAML file.
    # Please refer to vcluster documentation for the extensive explanation of the features,
    # and the appropriate Helm values that need to be set for your use case - https://www.vcluster.com/docs
    values: |-
      # example:
      # syncer:
      #   extraArgs:
      #   - --tls-san=myvcluster.mydns.abc

    chart: 
      # By default, the "https://charts.loft.sh" repo is used
      repo: ${CHART_REPO:=null}
      # By default, the "vcluster" chart is used. This coresponds to the "k3s" distro of the
      # vcluster, and the "/charts/k3s" folder in the vcluster GitHub repo.
      # Other available options currently are: "vcluster-k8s", "vcluster-k0s" and "vcluster-eks".
      name: ${CHART_NAME:=null}
      # By default, a particular vcluster version is used in a given CAPVC release. You may find
      # it out from the source code, e.g.: 
      # https://github.com/loft-sh/cluster-api-provider-vcluster/blob/v0.1.3/pkg/constants/constants.go#L7
      #
      # Please refer to the vcluster Releases page for the list of the available versions:
      # https://github.com/loft-sh/vcluster/releases
      version: ${CHART_VERSION:=null}

  # controlPlaneEndpoint represents the endpoint used to communicate with the control plane.
  # You may leave this field empty, and then CAPVC will try to fill in this information based
  # on the network resources created by the chart (Service, Ingress).
  # The vcluster chart provides options to create a service of LoadBalancer type by setting
  # Helm value - `.service.type: "LoadBalancer"`, or creating an Ingress by setting Helm value
  # `.ingress.enabled: true` and `.ingress.host`. You can explore all options in the charts
  # folder of our vcluster repo - https://github.com/loft-sh/vcluster/tree/main/charts
  #
  # We also recommend reading official vcluster documentation page on this topic:
  # https://www.vcluster.com/docs/operator/external-access
  # this page outlines additional Helm values that you will need to set in certain cases, e.g.
  # `.syncer.extraArgs: ["--tls-san=myvcluster.mydns.abc"]`
  #
  # This field, and all it's sub-fields, are optional.
  controlPlaneEndpoint:
    host: "myvcluster.mydns.abc"
    port: "443"

Development instructions

Prerequisites:

• Devspace
• clusterctl
• kubectl
• envsubst - which you can easily install into a local bin directory - GOBIN="$(pwd)/bin" go install -tags tools github.com/drone/envsubst/v2/cmd/[email protected]
• A Kubernetes cluster where you will have cluster-admin permissions

First, we install core components of the Cluster API:

clusterctl init

Next we will start a development container for the vcluster provider. Devspace will continuosly sync local source code into the container, and you will be able to easily and quickly restart the provider with the newest code via the shell that is opened by the following command:

devspace dev

Once the shell is opened, you should see some basic instructions printed. You can then run the provider with the following command:

go run -mod vendor main.go

Next, in a separate terminal you will generate a manifest file for a vcluster instance. Cluster instance is configured from a template file using environment variables - CLUSTER_NAME, KUBERNETES_VERSION, CHART_NAME, CHART_REPO, CHART_VERSION, VCLUSTER_HOST and VCLUSTER_PORT. Only the CLUSTER_NAME variable is mandatory. In the example commands below, the HELM_VALUES variable will be populated with the contents of the devvalues.yaml file, don't forget to re-run the export HELM_VALUES... command when the devvalues.yaml changes.

export CLUSTER_NAME=test
export CLUSTER_NAMESPACE=test
export KUBERNETES_VERSION=1.24.0
export HELM_VALUES=$(cat devvalues.yaml | sed -z 's/\n/\\n/g')
kubectl create namespace ${CLUSTER_NAMESPACE}
cat templates/cluster-template.yaml | ./bin/envsubst | kubectl apply -n ${CLUSTER_NAMESPACE} -f -

Now we just need to wait until VCluster custom resource reports ready status:

kubectl wait --for=condition=ready vcluster -n $CLUSTER_NAMESPACE $CLUSTER_NAME --timeout=300s

At this point the cluster is ready to be used. Please refer to "How to connect to your vcluster" chapter above to get the credentials.