Nerves System for the SmartRent Hub (OSS)

This is the base Nerves System configuration for the SmartRent Hub used for public trainings and open source purposes.

Feature	Description
CPU	1 GHz ARM Cortex-A8
Memory	512 MB DRAM
Storage	MicroSD
Linux kernel	5.10 w/ BBB patches
IEx terminal	ttyS0 via the FTDI connector
UART	LTE @ttyS1, Z-Wave @ttyS4
USB	Two host interfaces - LTE and WiFi
I2C	i2c-1 to PMIC to ATECC608A
Ethernet	No
LEDs	Red/green LEDs exposed via /sys/class/leds

Console access

The console is configured to output to ttyS0. This can be accessed by soldering wires onto test points on the underside of the board.

TODO: show where

Device tree overlays

This system does not enable or use device tree overlays. All device tree configuration for the hub is in the main device tree file - am335x-smartrent.dts

WiFi

TODO