Antidote

Welcome to the Antidote repository, the reference platform of the SyncFree European Project

About Antidote

Purpose

Antidote is an in-development distributed CRDT key-value store written in Erlang with Riak Core that is intended to provide the following features:

• Partitioning
• Intra-DC replication
• Inter-DC replication
• Support for atomic write transactions
• Flexible layered architecture so features can be smoothly added or removed

Architecture

Information about Antidote's layered design can be found in the following Google Doc

Current state

Not all features are available in the master branch.

• Partitioned
• Replicated within a datacenter
• State-based CRDT support, as it uses the Riak DT library
• Provides snapshot isolation
• Replication across DCs with causal ordering

Using Antidote

Prerequisites

• An UNIX-like OS
• Erlang R16B02

Getting Antidote

git clone [email protected]:SyncFree/antidote.git

Building Antidote

Single Node Cluster

make rel

Rebar will now pull all the dependencies it needs from github, and build the application, and make an erlang "release" of a single node. If all went well (if it didn't, send an email to the SyncFree tech mailing list), then you should be able to start a node of antidote.

15:55:05:antidote $ rel/antidote/bin/antidote console
(elided)
Eshell V5.10.3  (abort with ^G)
([email protected])1>

Again Ctrl-g and q to quit the shell and stop the node.

Multi-Node Cluster

To generate 6 nodes of antidote on your local machine, in ./dev:

make devrel

When that is done, we should start them all up:

for d in dev/dev*; do $d/bin/antidote start; done

And check that they're working:

for d in dev/dev*; do $d/bin/antidote ping; done
pong
pong
pong
pong

At this point you have 6 single node clusters running. We need to join them together in a cluster:

for d in dev/dev{2,3,4,5,6}; do $d/bin/antidote-admin cluster join '[email protected]'; done
Success: staged join request for '[email protected]' to '[email protected]'
Success: staged join request for '[email protected]' to '[email protected]'
Success: staged join request for '[email protected]' to '[email protected]'
Success: staged join request for '[email protected]' to '[email protected]'
Success: staged join request for '[email protected]' to '[email protected]'

Sends the requests to node1, which we can now tell to build the cluster:

 dev/dev1/bin/antidote-admin cluster plan
 ...
 dev/dev1/bin/antidote-admin cluster commit

Have a look at the member-status to see that the cluster is balancing:

dev/dev1/bin/antidote-admin member-status
================================= Membership ==================================
Status     Ring    Pending    Node
-------------------------------------------------------------------------------
valid     100.0%     16.6%    '[email protected]'
valid       0.0%     16.6%    '[email protected]'
valid       0.0%     16.6%    '[email protected]'
valid       0.0%     16.6%    '[email protected]'
valid       0.0%     16.7%    '[email protected]'
valid       0.0%     16.7%    '[email protected]'
-------------------------------------------------------------------------------
Valid:6 / Leaving:0 / Exiting:0 / Joining:0 / Down:0

Wait a while, and look again, and you should see a fully balanced cluster:

dev/dev1/bin/antidote-admin member-status
================================= Membership ==================================
Status     Ring    Pending    Node
-------------------------------------------------------------------------------
valid      16.6%      --    '[email protected]'
valid      16.6%      --    '[email protected]'
valid      16.6%      --    '[email protected]'
valid      16.6%      --    '[email protected]'
valid      16.6%      --    '[email protected]'
valid      16.6%      --    '[email protected]'
-------------------------------------------------------------------------------
Valid:6 / Leaving:0 / Exiting:0 / Joining:0 / Down:0

Remote calls

We don't have a client, or an API, but we can still call into the cluster using distributed erlang.

Let's start a node:

dev/dev1/bin/antidote console

First check that we can connect to the cluster:

([email protected])1> net_adm:ping('[email protected]').
pong

And you can shut down your cluster:

for d in dev/dev*; do $d/bin/antidote stop; done

Reading from and writing to a CRDT object stored in antidote:

Writing

Start a node (if you haven't done it yet):

dev/dev1/bin/antidote console

Perform a write operation (example):

([email protected])1> antidote:append(myKey, riak_dt_gcounter, {increment, 4}).
{ok,{1,'[email protected]'}}

The above rpc calls the function append from the module antidote:

append(Key, Type, {OpParam, Actor})

where

• Key = the key to write to
• Type = the type of the object being updated
• OpParam = the parameters of the update operation
• Actor = the actor of the update

In the particular call we have just used as an example:

• myKey = the key to write to.
• riak_dt_gcounter = the CRDT type, a gcounter
• {increment,4} = the parameters of the update

Reading

Start a node (if you haven't done it yet):

dev/dev1/bin/antidote console

Perform a read operation (example):

([email protected])1> antidote:read(myKey, riak_dt_gcounter).
1

The above calls the function read from the module antidote:

read(Key, Type)

where:

• Key = the key to read from.
• Type = the type of CRDT.

In the particular call we have just used as an example,

• myKey = the key to read from.
• riak_dt_gcounter = the CRDT type, a gcounter

The read operation will materialise (i.e., apply the operations that have been stored since the last materialisation, if any) the CRDT and return the result as an {ok, Result} tuple.

Running Tests

Setup testing framework

1. Clone Riak Test from GitHub
2. cd riak_test && make

Building antidote for testing

1. Go to antidote directory
2. make stagedevrel
3. ./riak_test/bin/antidote-setup.sh (only for the first time)
4. ./riak_test/bin/antidote-current.sh

Run all tests

1. make riak-test (assumes riak_test is located ../riak\_test)

Running tests

1. cd riak_test
2. ./riak_test -v -c antidote -t $TEST_TO_RUN