A Homebridge plugin for devices running fade/strobe effects on the Magic Home Wi-Fi system.
This plugin will create LightBulbs in Homekit capable of turning on/off, change color, change hue, change saturation.
This plugin can also create preset patterns Switches (color cycle, fade, strobe).
Its a great utility tool to set house mood to party/soothing with custom music.
Can cycle through colors, sync all lights to strobe/fade.
$ npm install -g --unsafe-perm homebridge
$ npm install -g --unsafe-perm homebridge-magichome-platformEdit config.json. Refer to config-sample.json.
seven_color_cross_fade
red_gradual_change
green_gradual_change
blue_gradual_change
yellow_gradual_change
cyan_gradual_change
purple_gradual_change
white_gradual_change
red_green_cross_fade
red_blue_cross_fade
green_blue_cross_fade
seven_color_strobe_flash
red_strobe_flash
green_strobe_flash
blue_stobe_flash
yellow_strobe_flash
cyan_strobe_flash
purple_strobe_flash
white_strobe_flash
seven_color_jumping
Any devices created by Zengge and running on the Magic Home Wi-Fi (or other apps by the same developer such as LED Magic Color) app should work with this plugin. Some examples of compatible devices are:
- 5 Channel Controller for RGB LED Strip
RGBWW - Magic UFO RGBW LED Strip controller
- SuperLegends Wi-Fi smart bulb
RGBW - Victorstar Wi-Fi Smart Light Bulb
- Flux Wi-Fi Light Bulb
- Fen-Yi Light Bulb
- Waterproof RGB LED Strips WIFI Controller
RGBW - Eastlion RGB Wi-Fi Strip Controller
{
"platforms": [
{
"platform": "MagicHome-Platform",
"debug": true,
"lights": [
{
"name": "Kitchen LED Strip",
"ip": "192.168.1.111",
"setup": "RGBW",
"purewhite": false,
"timeout": 10000
},
{
"name": "Living Room LED Strip",
"ip": "DC4F22C5XXXX",
"setup": "RGBWW",
"purewhite": true
}
],
"presetSwitches": [
{
"name": "Kitchen Color Strobe Flash (Party)",
"ips": {
"192.168.1.111": "255,255,255"
},
"preset": "seven_color_strobe_flash",
"speed": 60
},
{
"name": "All Lights Cross Fade (Soothing)",
"ips": {
"192.168.1.111": "0,150,255",
"DC4F22C5XXXX": "102, 255, 102"
},
"preset": "seven_color_cross_fade",
"speed": 40,
"shouldTurnOff": true
},
{
"name": "Jungle Mood (Soothing)",
"ips": {
"192.168.1.111": "0,150,255",
"DC4F22C5XXXX": "102, 255, 102"
},
"preset": "green_gradual_change",
"speed": 40,
}
]
}
]
}Preset Switch Configuration
ips must be a key-value object where key is MagicHome LED IP Address e.g. 192.168.1.11 or DC4F22C5XXXX MAC Address & value is default rgb color of the light. e.g. "255,255,255" (White).
Turning off Preset Pattern Switch , all lights will be reset to this color.
You can use MAC Address instead of IP Address as well. Please note format of MAC Address. It should be in capital letters and : should not be present. e.g. DC4F22C5XXXX
Do note : While using MACS : This plugin auto discover connected lights on the network and map IP's to their corresponding MAC. Initially it can take time to discover all devices. All devices should be discovered and mapped in 60-120s. Once mapped IP & MACs are cached, and gets rediscovered every 30s to map new IP to the light. This feature is useful for people unable to assign Static IP to their lights.
Default Discovery Interval => 5 Minutes Default Device Status Update Interval => 1 Minute
Setting Device timeout to 0, will disable polling device for status update.
$ npm run lintGet Slack Invite => https://slackin-znyruquwmv.now.sh/
Slack Channel => https://homebridgeteam.slack.com/messages/homebridge-magichome
Slack User => @sahilchaddha
Sahil Chaddha