RFSUITE Lua Scripts for Ethos

Rotorflight is a Flight Control software suite designed for single-rotor helicopters. It consists of:

• Rotorflight Flight Controller Firmware
• Rotorflight Configurator, for flashing and configuring the flight controller
• Rotorflight Blackbox Explorer, for analyzing blackbox flight logs
• Rotorflight Lua Scripts, for configuring the flight controller using a transmitter running:
  • EdgeTX/OpenTX
  • Ethos (this repository)

Built on Betaflight 4.3, Rotorflight incorporates numerous advanced features specifically tailored for helicopters. It's important to note that Rotorflight does not support multi-rotor crafts or airplanes; it's exclusively designed for RC helicopters.

This version of Rotorflight is also known as Rotorflight 2 or RF2.

Information

Tutorials, documentation, and flight videos can be found on the Rotorflight website.

Features

Rotorflight has many features:

• Many receiver protocols: CRSF, S.BUS, F.Port, DSM, IBUS, XBUS, EXBUS, GHOST, CPPM
• Support for various telemetry protocols: CSRF, S.Port, HoTT, etc.
• ESC telemetry protocols: BLHeli32, Hobbywing, Scorpion, Kontronik, OMP Hobby, ZTW, APD, YGE
• Advanced PID control tuned for helicopters
• Stabilisation modes (6D)
• Rotor speed governor
• Motorised tail support with Tail Torque Assist (TTA, also known as TALY)
• Remote configuration and tuning with the transmitter
  • With knobs / switches assigned to functions
  • With Lua scripts on EdgeTX, OpenTX and Ethos
• Extra servo/motor outputs for AUX functions
• Fully customisable servo/motor mixer
• Sensors for battery voltage, current, BEC, etc.
• Advanced gyro filtering
  • Dynamic RPM based notch filters
  • Dynamic notch filters based on FFT
  • Dynamic LPF
• High-speed Blackbox logging

Plus lots of features inherited from Betaflight:

• Configuration profiles for changing various tuning parameters
• Rates profiles for changing the stick feel and agility
• Multiple ESC protocols: PWM, DSHOT, Multishot, etc.
• Configurable buzzer sounds
• Multi-color RGB LEDs
• GPS support

And many more...

Lua Scripts Requirements

• Ethos 1.5.16 or later
• an X10, X12, X14, X18, X20 or Twin X Lite transmitter
• a FrSky Smartport or F.Port receiver using ACCESS, ACCST, TD or TW mode
• a ELRS Module supported by Ethos

Tested Receivers

The following receivers were correctly working with an X18 or X20, X10, XLite and X14 transmitter.

• TWMX
• TD MX
• R9 MX ACCESS
• R9 Mini ACCESS
• Archer RS ACCESS
• RX6R ACCESS
• R-XSR ACCESS
• R-XSR ACCST FCC F.port
• Archer Plus RS and Archer Plus RS Mini ACCESS F.Port
• ELRS (all versions)

Installation

Download the latest files (click Code and then Download ZIP. Install the zip file using ethos suite. (lua tools)

Telemetry Sensors

The below sensors are a good starting point when using rfsuite

ELRS
set crsf_telemetry_mode = CUSTOM
set crsf_telemetry_sensors = 3,4,5,61,50,51,52,60,99,93,6,95,96,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0

FPORT
set telemetry_enable_voltage = ON
set telemetry_enable_current = ON
set telemetry_enable_fuel = ON
set telemetry_enable_mode = ON
set telemetry_enable_esc_current = ON
set telemetry_enable_esc_voltage = ON
set telemetry_enable_esc_rpm = ON
set telemetry_enable_esc_temperature = ON
set telemetry_enable_temperature = ON
set telemetry_enable_cap_used = ON
set telemetry_enable_adjustment = ON
set telemetry_enable_gov_mode = ON
set telemetry_enable_model_id = ON
set telemetry_enable_pid_profile = ON
set telemetry_enable_rates_profile = ON
set telemetry_enable_bec_voltage = ON
set telemetry_enable_headspeed = ON
set telemetry_enable_tailspeed = ON
set telemetry_enable_throttle_control = ON
set telemetry_enable_arming_flags = ON

Contributing

Rotorflight is an open-source community project. Anybody can join in and help to make it better by:

• Helping other users on Rotorflight Discord or other online forums
• Reporting bugs and issues, and suggesting improvements
• Testing new software versions, new features and fixes; and providing feedback
• Participating in discussions on new features
• Create or update content on the Website
• Contributing to the software development - fixing bugs, implementing new features and improvements
• Translating Rotorflight Configurator into a new language, or helping to maintain an existing translation

Origins

Rotorflight is software that is open source and is available free of charge without warranty.

Rotorflight is forked from Betaflight, which in turn is forked from Cleanflight. Rotorflight borrows ideas and code also from HeliFlight3D, another Betaflight fork for helicopters.

Big thanks to everyone who has contributed along the journey!

Contact

Team Rotorflight can be contacted by email at [email protected].