Use Arduino IDE to edit/develope code: https://www.arduino.cc/en/software

This version of code has been tested to: Log data to SD card Webpage control interface Log data toggle w/ Enabled/Disabled indicator Reinitialize SD Card: necessary after removing and reinserting SD card in Arduino interface card Manual control Ramp From options: ramps to 15 PSI from an array of start points at a rate of 0.035PSI/minute maintains 15 PSI when reached Ramp to Target options: ramps to selected set-point at rate of 0.035PSI/minute maintians pressure at that selected setpoint when reached

Webpage address: generated via DHCP currently at 10.0.41.157, accessible via Chrome browser