Skip to content

pojiro/nerves_system_f3rp70

Repository files navigation

F3RP70 Support

This is the base Nerves System configuration for the F3RP70, e-RT3 Products, OS-free CPU module.

F3RP70 image
Image is provided by Yokogawa Electric Corporation

Feature Description
CPU ARM Cortex-A9 MPCore (Dual) 866 MHz
Memory 1 GB SDRAM
Storage 256MB Flash and Two SD slots (SD1/SD2)
Linux kernel 4.14.164 w/ 4.14.164-rt73 and ert3xlnx patch
IEx terminal UART ttySP0
GPIO, I2C, SPI No
ADC No
PWM No
UART ttySP0
Display No
Camera No
Ethernet Two 1Gbps (eth0 and eth1)
WiFi No
Bluetooth No
Audio No
RTC Yes w/ battery

Using

This port currently only runs off a SD card.

If you need custom modifications to this system for your device, clone this repository and update as described in Making custom systems

Networking

The board has two 1 Gbps Ethernet interfaces. Here's an example :vintage_net configuration that enables both of them:

config :vintage_net,
  config: [
    {"eth0",
     %{
       type: VintageNetEthernet,
       ipv4: %{
         method: :static,
         address: "192.168.3.72",
         prefix_length: 24,
         gateway: "192.168.3.1",
         name_servers: ["192.168.3.1"]
       }
     }},
    {"eth1",
     %{
       type: VintageNetEthernet,
       ipv4: %{method: :dhcp}
     }}
  ]