A Vagrant/VirtualBox environment including OpenOCD, ARM GCC, etc. primarily focused on probes supporting CMSIS-DAP for NXP Kinetis builds. However, this should be extendable to many other Arm Cortex-M based applications.
Preliminary testing has been performed with the following debug probes:
- Segger J-Link Plus
- NXP Kinetis FRDM-K28F board (running CMSIS-DAP firmware)
- LPC-Link2 using J-Link Plus firmware (currently, CMSIS-DAP is not working)
I have tested the environment under Pop!OS 18.04 LTS, my personal Linux desktop of choice. It should run on any other system supporting VirtualBox and Vagrant.
STM and ST-Link support is in progress.
Provided "as is". Use at own risk. Please raise any issues here in GitHub and thank you for your support.
- VirtualBox on your preferred platform.
- Vagrant.
Vagrant will take care of the rest!
git clone https://github.com/philmcm/arm-vagrant.git
cd arm-vagrant
vagrant up
Once installation is complete, vagrant ssh will get you into the environment.
Use openocd, cmake, and anything else you need.
This work is based on Emilie Gillet's mutable-dev-environment (https://github.com/pichenettes/mutable-dev-environment.git), which was in turn based on the Adafruit ARM-toolchain-vagrant project (https://github.com/adafruit/ARM-toolchain-vagrant.git).
When I had issues I consulted Emilie's work and often got the answer I needed. Thanks Emilie!