Support Token-2022 Program

README.md

@@ -1,10 +1,39 @@
 # Solana Programs
 Solana programs developed at Paxos
 
+## Minter Controller
+`minter_controller` is used to add transaction controls to Solana mint authorities for the token and token-2022 program.
+The transaction controls include rate limitings and whitelisting.  The program requires the token mint authority
+to be a [spl token multisig](https://spl.solana.com/token#example-mint-with-multisig-authority).
+
+### Usage
+
+#### Add Minter
+The program is first used by calling the `add_minter` instruction which creates a PDA that can be used to mint tokens.  
+The PDA is derived from the `minter_authority` and `mint_account`. 
+The minter PDA should be added as a signer on the spl token multisig.
+An `admin` Pubkey is also specified to update the transaction controls.
+
+#### Whitelisting
+Whitelisted addresses which can be minted to can be added via `add_whitelisted_address`. Whitelisted addresses can be
+removed via `remove_whitelisted_address`.  These instructions can only be called by the `admin`.
+
+#### Rate limiting
+The initial rate limit is specified when calling `add_minter`.  It can also be updated via `update_rate_limit`.
+These instructions can only be called by the `admin`.
+
+#### Update admin
+Updating the admin is a two step process. Step 1 is to call `start_admin_transfer` with the current `admin`.
+Step 2 is for the new admin to call `accept_admin_transfer`.
+
+#### Minting tokens
+Minting tokens is done by calling `mint_tokens`.  This instruction must be signed with the `minter_authority`.
+
+
 ## Development
 
 ### Required installs
-- rust 1.79.0 (Installed via asdf)
+- rust 1.79.0
 - [solana](https://docs.solanalabs.com/cli/install) 1.18.18
 - [anchor](https://book.anchor-lang.com/getting_started/installation.html) 0.30.1
 
@@ -13,6 +42,7 @@ Solana programs developed at Paxos
 
 ### Test
 `npm install`
+
 `anchor test`
 
 ### Deploy

programs/minter-controller/src/instructions/accept_admin_transfer.rs

@@ -1,9 +1,7 @@
 
 use {
     anchor_lang::prelude::*,
-    anchor_spl::{
-        token::{ Mint },
-    },
+    anchor_spl::token_interface::{Mint},
 };
 use crate::*;
 
@@ -21,7 +19,7 @@ pub struct AcceptAdminTransfer<'info> {
 
     // Mint account address is a PDA
     #[account()]
-    pub mint_account: Account<'info, Mint>,
+    pub mint_account: InterfaceAccount<'info, Mint>,
 
     #[account(
         mut,

programs/minter-controller/src/instructions/add_minter.rs

@@ -1,8 +1,6 @@
 use {
     anchor_lang::prelude::*,
-    anchor_spl::{
-        token::{ Mint },
-    },
+    anchor_spl::token_interface::{Mint},
 };
 use crate::*;
 
@@ -16,7 +14,7 @@ pub struct AddMinter<'info> {
 
     // Mint account address is a PDA
     #[account()]
-    pub mint_account: Account<'info, Mint>,
+    pub mint_account: InterfaceAccount<'info, Mint>,
 
     #[account(
         init, 

programs/minter-controller/src/instructions/add_whitelisted_address.rs

@@ -1,8 +1,6 @@
 use {
     anchor_lang::prelude::*,
-    anchor_spl::{
-        token::{ Mint },
-    },
+    anchor_spl::token_interface::{Mint},
 };
 use crate::*;
 
@@ -20,7 +18,7 @@ pub struct AddWhitelistedAddress<'info> {
 
     // Mint account address is a PDA
     #[account()]
-    pub mint_account: Account<'info, Mint>,
+    pub mint_account: InterfaceAccount<'info, Mint>,
 
     #[account(
         has_one = admin,

programs/minter-controller/src/instructions/get_remaining_amount.rs

@@ -1,8 +1,6 @@
 use {
     anchor_lang::prelude::*,
-    anchor_spl::{
-        token::{ Mint },
-    },
+    anchor_spl::token_interface::{Mint},
 };
 use crate::*;
 
@@ -17,7 +15,7 @@ pub struct GetRemainingAmount<'info> {
 
     // Mint account address is a PDA
     #[account()]
-    pub mint_account: Account<'info, Mint>,
+    pub mint_account: InterfaceAccount<'info, Mint>,
 
     #[account(
         mut,

programs/minter-controller/src/instructions/mint_token.rs

@@ -2,11 +2,10 @@ use {
     anchor_lang::prelude::*,
     anchor_spl::{
         associated_token::AssociatedToken,
-        token::{Mint, Token, TokenAccount},
+        token_interface::{Mint, TokenInterface, TokenAccount}
     },
 };
-pub use anchor_spl::token::spl_token;
-pub use anchor_spl::token::spl_token::ID as splId;
+pub use anchor_spl::token_2022::spl_token_2022;
 use crate::*;
 
 #[derive(Accounts)]
@@ -23,7 +22,7 @@ pub struct MintToken<'info> {
 
     // Mint account address is a PDA
     #[account(mut)]
-    pub mint_account: Account<'info, Mint>,
+    pub mint_account: InterfaceAccount<'info, Mint>,
 
     #[account(
         mut,
@@ -48,10 +47,11 @@ pub struct MintToken<'info> {
         payer = payer,
         associated_token::mint = mint_account,
         associated_token::authority = to_address,
+        associated_token::token_program = token_program
     )]
-    pub associated_token_account: Account<'info, TokenAccount>,
+    pub associated_token_account: InterfaceAccount<'info, TokenAccount>,
 
-    pub token_program: Program<'info, Token>,
+    pub token_program: Interface<'info, TokenInterface>,
     pub associated_token_program: Program<'info, AssociatedToken>,
     pub system_program: Program<'info, System>,
 }
@@ -68,8 +68,8 @@ pub fn mint_token(ctx: Context<MintToken>, amount: u64) -> Result<()> {
 
     // Invoke the mint_to instruction on the token program
     // Anchor does not implement the token multisig so we have to do it here manually.
-    let ix = spl_token::instruction::mint_to(
-        &splId,
+    let ix = spl_token_2022::instruction::mint_to(
+        ctx.accounts.token_program.to_account_info().key,
         ctx.accounts.mint_account.to_account_info().key,
         ctx.accounts.associated_token_account.to_account_info().key,
         ctx.accounts.mint_multisig.to_account_info().key,

programs/minter-controller/src/instructions/remove_whitelisted_address.rs

@@ -1,8 +1,6 @@
 use {
     anchor_lang::prelude::*,
-    anchor_spl::{
-        token::{ Mint },
-    },
+    anchor_spl::token_interface::{Mint},
 };
 use crate::*;
 
@@ -20,7 +18,7 @@ pub struct RemoveWhitelistedAddress<'info> {
 
     // Mint account address is a PDA
     #[account()]
-    pub mint_account: Account<'info, Mint>,
+    pub mint_account: InterfaceAccount<'info, Mint>,
 
     #[account(
         has_one = admin,

programs/minter-controller/src/instructions/start_admin_transfer.rs

@@ -1,9 +1,7 @@
 
 use {
     anchor_lang::prelude::*,
-    anchor_spl::{
-        token::{ Mint },
-    },
+    anchor_spl::token_interface::{Mint},
 };
 use crate::*;
 
@@ -21,7 +19,7 @@ pub struct StartAdminTransfer<'info> {
 
     // Mint account address is a PDA
     #[account()]
-    pub mint_account: Account<'info, Mint>,
+    pub mint_account: InterfaceAccount<'info, Mint>,
 
     #[account(
         mut,

programs/minter-controller/src/instructions/update_rate_limit.rs

@@ -1,9 +1,7 @@
 
 use {
     anchor_lang::prelude::*,
-    anchor_spl::{
-        token::{ Mint },
-    },
+    anchor_spl::token_interface::{Mint},
 };
 use crate::*;
 
@@ -21,7 +19,7 @@ pub struct UpdateRateLimit<'info> {
 
     // Mint account address is a PDA
     #[account()]
-    pub mint_account: Account<'info, Mint>,
+    pub mint_account: InterfaceAccount<'info, Mint>,
 
     #[account(
         mut, 

programs/minter-controller/src/lib.rs

@@ -6,7 +6,7 @@ use state::*;
 pub mod instructions;
 pub mod state;
 
-declare_id!("wKv26ghpb9Dtxd4ba8RtAndZKuGh1HjrEU2FRSFSPN6");
+declare_id!("DWGSMEEzjofw9Xd1rSUHr71HNgtmotoUbWuqRyfLcMWk");
 
 
 #[program]