Added Desktop config

.github/workflows/build.yaml

@@ -21,11 +21,12 @@ jobs:
     steps:
       - uses: actions/checkout@v3
       - name: Install Packages via Pacman
-        run: pacman -Sy; pacman --noconfirm -S git archiso python python-pygithub github-cli p7zip
+        run: pacman -Syu --noconfirm; pacman --noconfirm -S git archiso python python-pygithub github-cli p7zip
       - name: Replace packages and profile with Nvidia versions
         run: |
-          cp iso/packages-nvidia.x86_64 iso/packages.x86_64
-          cp iso/profiledef-nvidia.sh iso/profiledef.sh
+          mv iso/packages-nvidia.x86_64 iso/packages.x86_64
+          mv iso/profiledef-nvidia.sh iso/profiledef.sh
+          mv iso/airootfs/etc/mkinitcpio.conf-nvidia iso/airootfs/etc/mkinitcpio.conf
       - name: Build Nvidia image
         run: mkarchiso -v iso/
       - name: Upload Nvidia iso to the release
@@ -47,7 +48,10 @@ jobs:
     steps:
       - uses: actions/checkout@v3
       - name: Install Packages via Pacman
-        run: pacman -Sy; pacman --noconfirm -S git archiso python python-pygithub github-cli p7zip
+        run: pacman -Syu --noconfirm; pacman --noconfirm -S git archiso python python-pygithub github-cli p7zip
+      - name: remove packages and profile of nvidia versions
+        run: |
+          rm -f iso/airootfs/etc/mkinitcpio.conf-nvidia
       - name: Build non-Nvidia image
         run: mkarchiso -v iso/
       - name: Upload non-Nvidia iso to the release

iso/airootfs/etc/mkinitcpio.conf

@@ -0,0 +1,73 @@
+# vim:set ft=sh
+# MODULES
+# The following modules are loaded before any boot hooks are
+# run.  Advanced users may wish to specify all system modules
+# in this array.  For instance:
+#     MODULES=(usbhid xhci_hcd)
+MODULES=()
+
+# BINARIES
+# This setting includes any additional binaries a given user may
+# wish into the CPIO image.  This is run last, so it may be used to
+# override the actual binaries included by a given hook
+# BINARIES are dependency parsed, so you may safely ignore libraries
+BINARIES=()
+
+# FILES
+# This setting is similar to BINARIES above, however, files are added
+# as-is and are not parsed in any way.  This is useful for config files.
+FILES=()
+
+# HOOKS
+# This is the most important setting in this file.  The HOOKS control the
+# modules and scripts added to the image, and what happens at boot time.
+# Order is important, and it is recommended that you do not change the
+# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
+# help on a given hook.
+# 'base' is _required_ unless you know precisely what you are doing.
+# 'udev' is _required_ in order to automatically load modules
+# 'filesystems' is _required_ unless you specify your fs modules in MODULES
+# Examples:
+##   This setup specifies all modules in the MODULES setting above.
+##   No RAID, lvm2, or encrypted root is needed.
+#    HOOKS=(base)
+#
+##   This setup will autodetect all modules for your system and should
+##   work as a sane default
+#    HOOKS=(base udev autodetect modconf block filesystems fsck)
+#
+##   This setup will generate a 'full' image which supports most systems.
+##   No autodetection is done.
+#    HOOKS=(base udev modconf block filesystems fsck)
+#
+##   This setup assembles a mdadm array with an encrypted root file system.
+##   Note: See 'mkinitcpio -H mdadm_udev' for more information on RAID devices.
+#    HOOKS=(base udev modconf keyboard keymap consolefont block mdadm_udev encrypt filesystems fsck)
+#
+##   This setup loads an lvm2 volume group.
+#    HOOKS=(base udev modconf block lvm2 filesystems fsck)
+#
+##   NOTE: If you have /usr on a separate partition, you MUST include the
+#    usr and fsck hooks.
+HOOKS=(base udev modconf kms memdisk archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs block filesystems keyboard)
+
+# COMPRESSION
+# Use this to compress the initramfs image. By default, zstd compression
+# is used. Use 'cat' to create an uncompressed image.
+COMPRESSION="zstd"
+#COMPRESSION="gzip"
+#COMPRESSION="bzip2"
+#COMPRESSION="lzma"
+#COMPRESSION="xz"
+#COMPRESSION="lzop"
+#COMPRESSION="lz4"
+
+# COMPRESSION_OPTIONS
+# Additional options for the compressor
+#COMPRESSION_OPTIONS=()
+
+# MODULES_DECOMPRESS
+# Decompress kernel modules during initramfs creation.
+# Enable to speedup boot process, disable to save RAM
+# during early userspace. Switch (yes/no).
+#MODULES_DECOMPRESS="yes"

iso/airootfs/etc/mkinitcpio.conf-nvidia

@@ -0,0 +1,73 @@
+# vim:set ft=sh
+# MODULES
+# The following modules are loaded before any boot hooks are
+# run.  Advanced users may wish to specify all system modules
+# in this array.  For instance:
+#     MODULES=(usbhid xhci_hcd)
+MODULES=(nvidia nvidia_modeset nvidia_uvm nvidia_drm)
+
+# BINARIES
+# This setting includes any additional binaries a given user may
+# wish into the CPIO image.  This is run last, so it may be used to
+# override the actual binaries included by a given hook
+# BINARIES are dependency parsed, so you may safely ignore libraries
+BINARIES=()
+
+# FILES
+# This setting is similar to BINARIES above, however, files are added
+# as-is and are not parsed in any way.  This is useful for config files.
+FILES=()
+
+# HOOKS
+# This is the most important setting in this file.  The HOOKS control the
+# modules and scripts added to the image, and what happens at boot time.
+# Order is important, and it is recommended that you do not change the
+# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
+# help on a given hook.
+# 'base' is _required_ unless you know precisely what you are doing.
+# 'udev' is _required_ in order to automatically load modules
+# 'filesystems' is _required_ unless you specify your fs modules in MODULES
+# Examples:
+##   This setup specifies all modules in the MODULES setting above.
+##   No RAID, lvm2, or encrypted root is needed.
+#    HOOKS=(base)
+#
+##   This setup will autodetect all modules for your system and should
+##   work as a sane default
+#    HOOKS=(base udev autodetect modconf block filesystems fsck)
+#
+##   This setup will generate a 'full' image which supports most systems.
+##   No autodetection is done.
+#    HOOKS=(base udev modconf block filesystems fsck)
+#
+##   This setup assembles a mdadm array with an encrypted root file system.
+##   Note: See 'mkinitcpio -H mdadm_udev' for more information on RAID devices.
+#    HOOKS=(base udev modconf keyboard keymap consolefont block mdadm_udev encrypt filesystems fsck)
+#
+##   This setup loads an lvm2 volume group.
+#    HOOKS=(base udev modconf block lvm2 filesystems fsck)
+#
+##   NOTE: If you have /usr on a separate partition, you MUST include the
+#    usr and fsck hooks.
+HOOKS=(base udev modconf memdisk archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs block filesystems keyboard)
+
+# COMPRESSION
+# Use this to compress the initramfs image. By default, zstd compression
+# is used. Use 'cat' to create an uncompressed image.
+COMPRESSION="zstd"
+#COMPRESSION="gzip"
+#COMPRESSION="bzip2"
+#COMPRESSION="lzma"
+#COMPRESSION="xz"
+#COMPRESSION="lzop"
+#COMPRESSION="lz4"
+
+# COMPRESSION_OPTIONS
+# Additional options for the compressor
+#COMPRESSION_OPTIONS=()
+
+# MODULES_DECOMPRESS
+# Decompress kernel modules during initramfs creation.
+# Enable to speedup boot process, disable to save RAM
+# during early userspace. Switch (yes/no).
+#MODULES_DECOMPRESS="yes"

iso/airootfs/etc/mkinitcpio.d/linux.preset

@@ -1,9 +1,5 @@
 # mkinitcpio preset file for the 'linux' package on archiso
-
 PRESETS=('archiso')
-
 ALL_kver='/boot/vmlinuz-linux'
-archiso_config='/etc/mkinitcpio.conf.d/archiso.conf'
-
+archiso_config='/etc/mkinitcpio.conf'
 archiso_image="/boot/initramfs-linux.img"
-

iso/airootfs/etc/mkinitcpio.d/parchlinux

@@ -0,0 +1,7 @@
+# mkinitcpio preset file for the kernel
+ALL_kver='/boot/vmlinuz-linux'
+#PRESETS=('default' 'fallback')
+PRESETS=('default')
+default_image="/boot/initramfs-linux.img"
+#fallback_image="/boot/initramfs-linux-fallback.img"
+#fallback_options="-S autodetect"

iso/airootfs/etc/skel/.config/KDE/UserFeedback.org.kde.plasma-welcome.conf

@@ -0,0 +1,2 @@
+[UserFeedback]
+ApplicationStartCount=2

iso/airootfs/etc/skel/.config/QtProject.conf

@@ -0,0 +1,5 @@
+[FileDialog]
+history=@Invalid()
+lastVisited=file:///usr/share/pixmaps/
+qtVersion=6.7.2
+viewMode=Detail

iso/airootfs/etc/skel/.config/Trolltech.conf

@@ -0,0 +1,17 @@
+[qt]
+GUIEffects=none
+KDE\contrast=7
+KWinPalette\activeBackground=#31363b
+KWinPalette\activeBlend=#fcfcfc
+KWinPalette\activeForeground=#fcfcfc
+KWinPalette\activeTitleBtnBg=#2a2e32
+KWinPalette\frame=#2a2e32
+KWinPalette\inactiveBackground=#2a2e32
+KWinPalette\inactiveBlend=#a1a9b1
+KWinPalette\inactiveForeground=#a1a9b1
+KWinPalette\inactiveFrame=#2a2e32
+KWinPalette\inactiveTitleBtnBg=#2a2e32
+Palette\active=#fcfcfc, #31363b, #474d54, #3a4045, #141618, #24282b, #fcfcfc, #ffffff, #fcfcfc, #1b1e20, #2a2e32, #0f1012, #3daee9, #fcfcfc, #1d99f3, #9b59b6, #232629, #000000, #31363b, #fcfcfc, #a1a9b1, #3daee9
+Palette\disabled=#6e7173, #2f3338, #454c52, #393e44, #131517, #222629, #656768, #ffffff, #727679, #1a1d1f, #282c30, #0e0f11, #282c30, #6e7173, #1a4665, #443051, #212427, #000000, #31363b, #fcfcfc, #464b4f, #282c30
+Palette\inactive=#fcfcfc, #31363b, #474d54, #3a4045, #141618, #24282b, #fcfcfc, #ffffff, #fcfcfc, #1b1e20, #2a2e32, #0f1012, #1f485e, #fcfcfc, #1d99f3, #9b59b6, #232629, #000000, #31363b, #fcfcfc, #a1a9b1, #1f485e
+font="Noto Sans,10,-1,0,400,0,0,0,0,0,0,0,0,0,0,1"