fix formatting

draft-ogondio-opsawg-isis-topology.md

@@ -187,28 +187,31 @@ arrows show how the modules augment each other.
 There are some limitations in the {{!RFC8345}} that are explained in more detail in {{!I-D.draft-havel-opsawg-digital-map}}.
 The current version of the ietf-l3-isis-topology module is based on the current version of {{!RFC8345}}.
 The following will be addressed when {{!RFC8345}} is extended to support the identified limitations:
-- Both IS-IS domain and IS-IS areas could be modelled as networks
-- The IS-IS Areas will be connected via IS-IS links
-- IS-IS nodes could belong to multiple IS-IS networks
+
+* Both IS-IS domain and IS-IS areas could be modelled as networks
+* The IS-IS Areas will be connected via IS-IS links
+* IS-IS nodes could belong to multiple IS-IS networks
 
 There is a set of parameters and augmentations that are included at the network level.
 
-- Network-types: Its presence identifies the IS-IS topology type. Thus, the network type MUST be isis-topology.
+* Network-types: Its presence identifies the IS-IS topology type. Thus, the network type MUST be isis-topology.
 
 There is a set of parameters and augmentations that are included at the node level. Each parameter and description are detailed following:
 
-- IS-IS node core attributes: contains the IS-IS core attributes (system-id, level, area-address).
-- IS-IS timer attributes: Identifies the node timer attributes configured in the network element. They are LSP lifetime and the LSP refresh interval.
+* IS-IS node core attributes: contains the IS-IS core attributes (system-id, level, area-address).
+* IS-IS timer attributes: Identifies the node timer attributes configured in the network element. They are LSP lifetime and the LSP refresh interval.
 
 There is a set of parameters and augmentations that are included at the link level. Each parameter and description are detailed following:
-- IS-IS link level. The level must be the same as the termination points at each end for Level 1 and Level 2 interfaces. There may be 2 links
+
+* IS-IS link level. The level must be the same as the termination points at each end for Level 1 and Level 2 interfaces. There may be 2 links
 between the Level1-2 IS-IS interfaces, one for Level 1 adjacency and one for Level 2 adjacency.
-- IS-IS link metric. Added on top of metric1 and metric2 of the l3-link-attributes
+* IS-IS link metric. Added on top of metric1 and metric2 of the l3-link-attributes
 
 There is a  set of parameters and augmentations are included at the termination point level. Each parameter is listed as follows:
-- Interface-type: point-to point or braodcast
-- Level. The level must be the same as for the node, except when node is Level 1-2 and the interfaces can only be Level 1 or Level 2.
-- Passive mode
+
+* Interface-type: point-to point or braodcast
+* Level. The level must be the same as for the node, except when node is Level 1-2 and the interfaces can only be Level 1 or Level 2.
+* Passive mode
 
 {: #ietf-l3-isis-topology-tree}