Motor Temperature LED Status

[HebiMigrator]

There was a question recently about at what motor winding temperature does the actuator status LED start to blink red, indicating the thermal safety controller is active.
https://docs.hebi.us/core_concepts.html ... atus-codes

On the X-Series and R-Series actuators, the LED starts blinking at 130 deg-C. Above this, the internal thermal safety control will limit power to the motor to keep the winding temperature below 155 deg-C.

Originally posted by dave_rollinson on forums.hebi.us » Tue May 26, 2020 5:36 pm