lfs_format adde3d to faq

docs/README.md

@@ -18,7 +18,7 @@ Do not add anything here, as it will overwritten with next rebuild.
 | [Drivers](https://github.com/openshwprojects/OpenBK7231T_App/blob/main/docs/drivers.md) (41 total) | Drivers allows you to control certain peripherals or enable certain features that are off by default. |
 | [Script constants](https://github.com/openshwprojects/OpenBK7231T_App/blob/main/docs/constants.md) (29 total) | Every console command that takes an integer argument supports certain constant expansion.  |
 | [Channel Types](https://github.com/openshwprojects/OpenBK7231T_App/blob/main/docs/channelTypes.md) (42 total) | Channel types are often not required and don't have to be configured, but in some cases they are required for better device control from OpenBeken web panel. Channel types describes the kind of value stored in channel, for example, if you have a Tuya Fan Controller with 3 speeds control, you can set the channel type to LowMidHigh and it will display the correct UI radiobutton on OpenBeken panel.<br>Some channels have '_div10' or '_div100' sufixes. This is for TuyaMCU. This is needed because TuyaMCU sends values as integers, so it sends, for example, 215 for 21.5C temperature, and we store it internally as 215 and only convert to float for display. |
-| [FAQ](https://github.com/openshwprojects/OpenBK7231T_App/blob/main/docs/faq.md) (29 total) | Here is a detailed list of questions you may ask. Some information from docs is repeated here. |
+| [FAQ](https://github.com/openshwprojects/OpenBK7231T_App/blob/main/docs/faq.md) (30 total) | Here is a detailed list of questions you may ask. Some information from docs is repeated here. |
 | [Console/Script commands](https://github.com/openshwprojects/OpenBK7231T_App/blob/main/docs/commands.md) (280 total) | There are multiple console commands that allow you to automate your devices. Commands can be entered manually in command line, can be send by HTTP (just like in Tasmota), can be send by MQTT and also can be scripted. |
 | [Command Examples](https://github.com/openshwprojects/OpenBK7231T_App/blob/main/docs/commandExamples.md) (10 total) | Here you can find some examples of console commands usage |
 | [Autoexec.bat examples (configs)](https://github.com/openshwprojects/OpenBK7231T_App/blob/main/docs/autoexecExamples.md) (18 total) | Here you can find examples of autoexec.bat configs. The autoexec.bat file can be created in Web Application, under LittleFS tab, and is run every time device reboots (unless device enters safe mode/AP mode). The autoexec.bat file allows you to create more advanced configs, setup TuyaMCU mappings, etc |

docs/faq.md

@@ -27,6 +27,9 @@ All questions/answers were taken from json file.
 **Question:** *How to make device discoverable by Windows?*<br>**A:** OpenBeken devices will show up in Windows Network if you run SSDP driver. This driver must be run at each startup. You could just do 'startDriver SSDP' in console but that will not run again after reboot, so either use Short Startup Command or autoexec.bat to run that command with each reboot
 
 
+**Question:** *How to remove autoexec.bat breaking the device in safe mode?*<br>**A:** You can use lfs_format command to clear LittleFS even in SafeMode. This can be useful if you've written a script that immediatelly shuts down or crashes OBK and prevents you from accessing the page.
+
+
 **Question:** *How to make device discoverable by Alexa?*<br>**A:** Just like with SSDP, but in this case you MUST run both SSDP and Wemo drivers. So, use that command for startup: backlog startDriver SSDP; startDriver Wemo
 
 

docs/json/faq.json

@@ -31,6 +31,10 @@
         "question": "How to make device discoverable by Windows?",
         "answer": "OpenBeken devices will show up in Windows Network if you run SSDP driver. This driver must be run at each startup. You could just do 'startDriver SSDP' in console but that will not run again after reboot, so either use Short Startup Command or autoexec.bat to run that command with each reboot"
     },
+    {
+        "question": "How to remove autoexec.bat breaking the device in safe mode?",
+        "answer": "You can use lfs_format command to clear LittleFS even in SafeMode. This can be useful if you've written a script that immediatelly shuts down or crashes OBK and prevents you from accessing the page."
+    },
     {
         "question": "How to make device discoverable by Alexa?",
         "answer": "Just like with SSDP, but in this case you MUST run both SSDP and Wemo drivers. So, use that command for startup: backlog startDriver SSDP; startDriver Wemo"