Pool Pump Manager

Component developed by using the amazing development template blueprint.

This custom component for Home Assistant can be used to automatically control a pool pump that is turned on/off by a switch that Home Assistant can control.

This component is based on the work of @exxamalte.

On top of the original version by @exxamalte, this version can be installed by HACS and you can use the blueprint feature to quickly fork this repo and have a working development environment in a container.

I will adapt it to my needs. At completion this plugin will compute the filtering schedule taking into account the pool water temperature.

Minimum requirements

• A switch supported in Home Assistant that can turn on/off power to your pool pump.

Features

• Compute the total duration according to the pool water temperature.
• Can control any switch (or other entity) that supports being turned on/off.
• Support for distinguishing three different switch modes:
  • Auto: Turn switch on/off automatically based on rules and configuration.
  • On: Turn switch on.
  • Off: Turn switch off.
• Splits the total target duration into two runs around the solar noon. 1/3 before ans 2/3 after to allow filtering during the hottest part of the day.
• You can add a customizable break between the two runs.
• Initializes an entity (pool_pump.schedule) that shows the current or next run of the pool pump.
• Optional: Support for a water level sensor to specify an entity that indicates if the pool has reached a critical water level in which case the pool pump should not run at all.

Installation

HACS installation

1. Install HACS. That way you get updates automatically.
2. Add this Github repository as custom repository in HACS settings.
3. search and install "Pool Pump Manger" in HACS and click install.
4. Modify your configuration.yaml as explain below.
5. Restart Home Assistant.

Manual installation

1. Using the tool of choice open the directory (folder) for your HA configuration (where you find configuration.yaml).
2. If you do not have a custom_components directory (folder) there, you need to create it.
3. In the custom_components directory (folder) create a new folder called pool_pump.
4. Download all the files from the custom_components/pool_pump/ directory (folder) in this repository.
5. Place the files you downloaded in the new directory (folder) you created.
6. Modify your configuration.yaml as explain below
7. Restart Home Assistant

Configuration

In the following examples we are assuming that you have a switch that is connected to your pool pump and can turn that on/off already. That switch is already integrated into Home Assistant with entity id switch.pool_pump_switch.

Tri-state switch

The following configuration wraps the switch into a tri-state switch which supports 3 modes - Auto, On, Off. The automation are required to translate each state into an action on the actual switch connected to the pool pump.

The last two automation are the ones that actually checks the pool pump state. The first is triggered at regular intervals (5 minutes) from shortly before sunrise to shortly after sunset. And the second automation is triggered by certain events - the start of Home Assistant, immediately when you put the pool pump into 'Auto' mode, and whenever several key levers and sensors change.

input_select:
  pool_pump_mode:
    name: Pool Pump mode
    options:
      - 'Auto'
      - 'On'
      - 'Off'
    initial: 'Auto'
    icon: mdi:water-pump

automation:
  - alias: 'Pool Pump On'
    trigger:
      - platform: state
        entity_id: input_select.pool_pump_mode
        to: 'On'
    action:
      service: homeassistant.turn_on
      entity_id: switch.pool_pump_switch

  - alias: 'Pool Pump Off'
    trigger:
      - platform: state
        entity_id: input_select.pool_pump_mode
        to: 'Off'
    action:
      service: homeassistant.turn_off
      entity_id: switch.pool_pump_switch

  - alias: 'Check Pool Pump Periodically'
    trigger:
      - platform: time_pattern
        minutes: '/5'
        seconds: 00
    action:
      service: pool_pump.check

  - alias: 'Check Pool Pump on Event'
    trigger:
      - platform: homeassistant
        event: start
      - platform: state
        entity_id:
          - sensor.pool_water_temperature
          - input_select.pool_pump_mode
          - binary_sensor.pool_water_level_critical
    action:
      service: pool_pump.check

Number of hours to run the pool pump

The total duration of the pool pump is computed using the pool water temperature. You can use a sensor (like in the example below: sensor.pool_water_temperature) or you can use an input_number replacing the sensor to manually set the water temperature .

Currently this integration is using an Abacus algorithm. You can go to py_pool_pump for detailed information.

Critical Water Level

If the pool pump is fed through a skimmer then there is typically a minimum water level under which the pool pump does not receive enough water anymore and starts pulling in air which is not ideal.

The Pool Pump manager supports specifying an entity id using parameter water_level_critical_entity_id. If that entity is on the pool pump will not turn on, and if it is off then the manager will just follow its time/sun based algorithm to turn the pool pump on or off.

Setting thin entity dedicated to critical water level is optional.

Pool Pump integration configuration

The pool pump component needs all the above entities as input to be able to make the right decision and turn the pool pump on or off automatically.

pool_pump:
  switch_entity_id: switch.pool_pump_switch
  pool_pump_mode_entity_id: input_select.pool_pump_mode
  pool_temperature_entity_id: sensor.pool_water_temperature
  # optional:
  water_level_critical_entity_id: binary_sensor.pool_water_level_critical
  schedule_break_in_hours: 1.0

Default value for schedule_break_in_hours is 0 hours.

Contributions are welcome!

If you want to contribute to this please read the Contribution guidelines

---