[WIP] oVirt 4.5.0 Release

Signed-off-by: Sandro Bonazzola <[email protected]>

source/community/get-involved/repository-mirrors.md

@@ -40,7 +40,7 @@ Then when the mirror is in sync you can add it to the mirrorlist (*resources.ovi
 | [Studenten Net Twente (SNT)](http://www.snt.utwente.nl/)              | The Netherlands                | [http](http://ftp.snt.utwente.nl/pub/software/ovirt/) | [ftp](ftp://ftp.snt.utwente.nl/pub/software/ovirt/)   |                                                | ftpcom at snt.utwente.nl        |                                                                                 |
 | [Georgia Tech Software Library (GTlib)](http://www.gtlib.gatech.edu/) | United States (Georgia)        | [http](http://www.gtlib.gatech.edu/pub/oVirt/pub/)    | [ftp](ftp://www.gtlib.gatech.edu/pub/oVirt/pub/)      | [rsync](rsync://rsync.gtlib.gatech.edu/oVirt/) | gtlib_at_gtlib.gatech.edu       |                                                                                 |
 | [ibiblio](http://www.ibiblio.org/)                                    | United States (North Carolina) | [http](http://mirrors.ibiblio.org/ovirt/)             |                                                       |                                                | cmpalmer_at_ibiblio.org         |                                                                                 |
-| [Rochester Institute of Technology](http://www.rit.edu)               | United States (New York)       | [http](http://mirrors.rit.edu/ovirt/pub/)             | [ftp](ftp://mirrors.rit.edu/ovirt/)                   |                                                | pfmeec_at_rit.edu               |                                                                                 |
+| [Rochester Institute of Technology](http://www.rit.edu)               | United States (New York)       | [http](http://mirrors.rit.edu/ovirt/)                 | [ftp](ftp://mirrors.rit.edu/ovirt/)                   |                                                | pfmeec_at_rit.edu               |                                                                                 |
 | [Duke University](http://duke.edu)                                    | United States (North Carolina) | [http](http://mirror.linux.duke.edu/ovirt/pub/)       |                                                       |                                                | drew.stinnett_at_duke.edu       |                                                                                 |
 | [Plus.line AG](http://www.plusline.net/en/)                           | Germany (Frankfurt)            | [http](http://ftp.plusline.net/ovirt/)                | [ftp](ftp://ftp.plusline.net/pub/ovirt/)              | [rsync](rsync://ftp.plusline.net/ovirt/)       | ftp-admin_at_plusline.net       |                                                                                 |
 | [Silesian University in Opava](http://www.slu.cz)                     | Czech Republic (Opava)         | [http](http://mirror.slu.cz/ovirt/)                   | [ftp](ftp://mirror.slu.cz/ovirt/)                     |                                                | jiri_slezka_at_slu_cz           | 1Gbps, IPv6 ready                                                               |

source/documentation/common/install/proc-Enabling_the_Red_Hat_Virtualization_Manager_Repositories.adoc

@@ -96,30 +96,14 @@ endif::rhv-doc[]
 ifdef::ovirt-doc[]
 
 Ensure the correct repositories are enabled.
-For oVirt 4.4:
 
-[source,terminal,subs="normal"]
-----
-# dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm
-----
-
-For oVirt 4.5:
 If you are going to install on RHEL 8.6 Beta please follow link:/download/install_on_rhel.html[Installing on RHEL] first.
 
 [source,terminal,subs="normal"]
 ----
 # dnf install -y centos-release-ovirt45
 ----
 
-After that, for oVirt 4.5 pre-release testing you'll need to execute:
-
-[source,terminal,subs="normal"]
-----
-# dnf install -y python3-dnf-plugins-core
-# dnf config-manager --set-enabled centos-ovirt45-testing
-# dnf config-manager --set-enabled ovirt-45-upstream-testing
-----
-
 You can check which repositories are currently enabled by running `dnf repolist`.
 
 . Enable the `javapackages-tools` module.

source/documentation/common/upgrade/proc-Manually_Updating_Hosts.adoc

@@ -38,18 +38,19 @@ ifdef::rhv-doc[]
 ----
 endif::[]
 ifdef::ovirt-doc[]
-* For {hypervisor-fullname}s, the `ovirt-release44` RPM package enabling the correct repositories is already installed. Ensure it is updated to the latest version:
+* If you are going to install on RHEL 8.6 Beta please follow link:/download/install_on_rhel.html[Installing on RHEL] first.
+* For {hypervisor-fullname}s, the `centos-release-ovirt45` RPM package enabling the correct repositories is already installed. Ensure it is updated to the latest version:
 +
 [source,terminal,subs="normal"]
 ----
-# dnf update -y ovirt-release44
+# dnf update -y centos-release-ovirt45
 ----
 
 * For {enterprise-linux-host-fullname}s:
 +
 [source,terminal,subs="normal"]
 ----
-# dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm
+# dnf install -y centos-release-ovirt45
 ----
 
 endif::[]

source/documentation/common/upgrade/proc-Updating_Individual_Hosts.adoc

@@ -42,18 +42,19 @@ ifdef::rhv-doc[]
 ----
 endif::[]
 ifdef::ovirt-doc[]
-* For {hypervisor-fullname}s, the `ovirt-release44` RPM package enabling the correct repositories is already installed. Ensure it is updated to the latest version:
+* If you are going to install on RHEL 8.6 Beta please follow link:/download/install_on_rhel.html[Installing on RHEL] first.
+* For {hypervisor-fullname}s, the `centos-release-ovirt45` RPM package enabling the correct repositories is already installed. Ensure it is updated to the latest version:
 +
 [source,terminal,subs="normal"]
 ----
-# dnf update -y ovirt-release44
+# dnf update -y centos-release-ovirt45
 ----
 
 * For {enterprise-linux-host-fullname}s:
 +
 [source,terminal,subs="normal"]
 ----
-# dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm
+# dnf install -y centos-release-ovirt45
 ----
 endif::[]
 

source/documentation/common/upgrade/proc-Updating_the_Red_Hat_Virtualization_Manager.adoc

@@ -18,7 +18,7 @@ endif::migrating_to_SHE[]
 ifdef::upgrade[]
 .Prerequisites
 ifdef::ovirt-doc[]
-* The RPM package link:https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm[ovirt-release44.rpm] is installed and updated to the latest version. This package includes the necessary repositories.
+* The RPM package "centos-release-ovirt45" is installed and updated to the latest version. This package includes the necessary repositories.
 endif::ovirt-doc[]
 
 ifdef::rhv-doc[]

source/documentation/index.haml

@@ -49,12 +49,9 @@ hide_metadata: true
     :markdown
       ### Release Notes
 
-      #### Pre-Release Notes
-      - [oVirt 4.5.0](/release/4.5.0/)
-
       #### Latest Release Notes
-      - [oVirt 4.4.10](/release/4.4.10/)
+      - [oVirt 4.5.0](/release/4.5.0/)
 
       #### Previous Release Notes
-      - [oVirt 4.4.9](/release/4.4.9/)
+      - [oVirt 4.4.10](/release/4.4.10/)
       - [All Releases](/release/)

source/download/alternate_downloads.md

@@ -18,18 +18,18 @@ preferred because the Engine Virtual Machine will be highly available (once a se
 However, if you prefer to run the oVirt Engine standalone on physical hardware or another virtualization provider, you can install oVirt Engine
 and Nodes / Hosts separately.
 
-oVirt 4.4.10 is intended for production use and is available for the following platforms:
+oVirt 4.5.0 is intended for production use and is available for the following platforms:
 
 Engine:
-- Red Hat Enterprise Linux 8.5 (or similar)
+- Red Hat Enterprise Linux 8.6 (or similar)
 - CentOS Stream
 
 Hosts:
-- Red Hat Enterprise Linux 8.5 (or similar)
+- Red Hat Enterprise Linux 8.6 (or similar)
 - oVirt Node (based on CentOS Stream)
 - CentOS Stream
 
-See the [Release Notes for oVirt 4.4.10](/release/4.4.10/).
+See the [Release Notes for oVirt 4.5.0](/release/4.5.0/).
 
 <div class="row"></div>
 
@@ -44,47 +44,32 @@ unless you are a developer or need to customize the source code.
 
 {:.alert.alert-warning}
 **Important:** You cannot skip a version when updating oVirt Engine. For example, if you are updating from
-3.6 to 4.4, you first need to update to 4.0, then to 4.1, 4.2, 4.3 and finally to 4.4. (Host upgrades can use the
-[oVirt Fast Forward Upgrade tool](https://github.com/oVirt/ovirt-fast-forward-upgrade).)
-If you are updating from 4.3, please note you'll need to migrate your engine from el7 to el8.
+3.6 to 4.5, you first need to update to 4.0, then to 4.1, 4.2, 4.3 before updating to 4.4 or 4.5.
 
-### Upgrading from previous releases
+As an exception you can upgrade from 4.3 to 4.5 without upgrading to 4.4 first.
+
+### Upgrading from 4.3
 
 For a standalone engine this means basically:
 
 1. backup engine data on 4.3.10 with:
    `engine-backup --scope=all --mode=backup --file=backup.bck --log=backuplog.log`
 2. copy the backup to a safe location
-3. reinstall engine host with EL 8
-4. enable repos with:
-   `dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm`
-5. `dnf update` (reboot if needed)
-6. enable modules with:
-   `dnf module enable -y javapackages-tools pki-deps postgresql:12 389-ds`
-7. install engine rpms with:
-   `dnf install ovirt-engine`
-8. restore the engine data with:
+3. reinstall engine host with EL 8 as described in next section
+4. restore the engine data with:
    `engine-backup --mode=restore --file=backup.bck --log=restore.log --provision-db --provision-dwh-db --restore-permissions --provision-dwh-db`
-9. run `engine-setup`.
+5. run `engine-setup`.
 
 #### Red Hat Enterprise Linux, CentOS Linux
 
 {:.instructions}
-1.  Enable the Base, Optional, and Extra repositories (Red Hat Enterprise Linux only):
-
-        # RHEL only -- they are enabled by default on CentOS and oVirt Node
-        sudo subscription-manager repos --enable="rhel-8-for-x86_64-baseos-rpms"
-        sudo subscription-manager repos --enable="rhel-8-for-x86_64-appstream-rpms"
-        sudo subscription-manager repos --enable="ansible-2-for-rhel-8-x86_64-rpms"
-
-        # RHEL beta releases only
-        sudo subscription-manager repos --enable="rhel-8-for-x86_64-baseos-beta-rpms"
-        sudo subscription-manager repos --enable="rhel-8-for-x86_64-appstream-beta-rpms"
+1.  If you are going to install on Red Hat Enterprise Linux 8.6 Beta,
+    please read [Installing on RHEL](/download/install_on_rhel.html) first.
 
 2.  Add the official oVirt repository.
 
-        sudo dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm
-        sudo dnf module enable -y javapackages-tools pki-deps postgresql:12 389-ds
+        sudo dnf install -y centos-release-ovirt45
+        sudo dnf module enable -y javapackages-tools pki-deps postgresql:12 389-ds mod_auth_openidc
 
 3.  Install oVirt Engine.
 
@@ -109,7 +94,7 @@ require more than one Host.
 oVirt supports two types of [Hosts](/documentation/installing_ovirt_as_a_self-hosted_engine_using_the_command_line#Installing_Hosts_for_RHV_SHE_cli_deploy):
 
 * [oVirt Node](/download/node.html) and
-* [Enterprise Linux (such as CentOS or RHEL)](/documentation/installing_ovirt_as_a_self-hosted_engine_using_the_command_line#Red_Hat_Enterprise_Linux_hosts_SHE_cli_deploy)
+* [Enterprise Linux (such as CentOS Stream or RHEL)](/documentation/installing_ovirt_as_a_self-hosted_engine_using_the_command_line#Red_Hat_Enterprise_Linux_hosts_SHE_cli_deploy)
 
 Depending on your environment requirements, you may want to use only oVirt Nodes, only EL Hosts, or both.
 
@@ -119,7 +104,7 @@ Depending on your environment requirements, you may want to use only oVirt Nodes
 physical machine to act as a hypervisor in an oVirt environment.
 
 {:.instructions}
-1.  Download the oVirt Node Installation ISO (current stable is [oVirt Node 4.4 - Stable Release - Installation ISO](https://resources.ovirt.org/pub/ovirt-4.4/iso/ovirt-node-ng-installer/))
+1.  Download the oVirt Node Installation ISO (current stable is [oVirt Node 4.5 - Stable Release - Installation ISO](https://resources.ovirt.org/pub/ovirt-4.5/iso/ovirt-node-ng-installer/))
 
 2.  Write the oVirt Node Installation ISO disk image to a USB, CD, or DVD.
 
@@ -134,17 +119,16 @@ basic installation of an Enterprise Linux operating system on a physical server
 packages are installed.
 
 {:.instructions}
-1.  Install one of the supported operating systems (CentOS, RHEL) on your Host and update it:
+1.  Install one of the supported operating systems (CentOS, RHEL) on your Host and update it. If you are going to install on RHEL 8.6 Beta, please follow [Installing on RHEL](/download/install_on_rhel.html) first.
 
         sudo dnf update -y
         # reboot if the kernel was updated
 
 2.  Add the official oVirt repository:
 
-        sudo dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm
+        sudo dnf install -y centos-release-ovirt45
 
-See [Enterprise Linux Hosts](/documentation/installing_ovirt_as_a_self-hosted_engine_using_the_command_line#Red_Hat_Enterprise_Linux_hosts_SHE_cli_deploy) for full installation
-instructions.
+See [Enterprise Linux Hosts](/documentation/installing_ovirt_as_a_self-hosted_engine_using_the_command_line#Red_Hat_Enterprise_Linux_hosts_SHE_cli_deploy) for full installation instructions.
 
 #### Attaching your Hosts
 
@@ -175,16 +159,15 @@ Storage can be implemented using:
 
 Using the oVirt Administration Portal, navigate to Storage → Domains → New and enter the Storage details.
 See [Configuring Storage](/documentation/installing_ovirt_as_a_self-hosted_engine_using_the_command_line#Adding_Storage_Domains_to_RHV_SHE_cli_deploy) and
-[Storage Administration](/documentation/administration_guide/#chap-Storage) for guidance on configuring storage for your
-environment.
+[Storage Administration](/documentation/administration_guide/#chap-Storage) for guidance on configuring storage for your environment.
 
 ## Install Virtual Machines
 
-Once oVirt Engine is installed and you have added Hosts and [configured storage](/documentation/installing_ovirt_as_a_self-hosted_engine_using_the_command_line#Adding_Storage_Domains_to_RHV_SHE_cli_deploy),
+Once oVirt Engine is installed, you have added Hosts and [configured storage](/documentation/installing_ovirt_as_a_self-hosted_engine_using_the_command_line#Adding_Storage_Domains_to_RHV_SHE_cli_deploy),
 you can now install Virtual Machines!
 
-See the [Virtual Machine Management Guide](/documentation/virtual_machine_management_guide/) for complete
-instructions.
+See the [Virtual Machine Management Guide](/documentation/virtual_machine_management_guide/)
+for complete instructions.
 
 For best Virtual Machine performance and accurate dashboard statistics, be sure to install the
 [oVirt Guest Agent and Drivers for Linux](/documentation/virtual_machine_management_guide/#Installing_the_Guest_Agents_and_Drivers_on_Red_Hat_Enterprise_Linux)
@@ -226,26 +209,14 @@ and [Browser Support](/download/browsers_and_mobile.html) for more information.
 
 ## RPM Repositories and GPG keys
 
-### oVirt 4.5 BETA
+### oVirt 4.5
 
 oVirt 4.5 is shipped via CentOS repositories.
-If you are going to install on RHEL 8.6 Beta please follow [Installing on RHEL](/download/install_on_rhel.html) first.
+If you are going to install on RHEL 8.6 Beta, please follow [Installing on RHEL](/download/install_on_rhel.html) first.
 
 In order to enable oVirt 4.5 repositories on CentOS Stream you need to execute:
 ```bash
 dnf install -y centos-release-ovirt45
 ```
 
-After that, for pre-release testing you'll need to execute:
-
-```bash
-dnf install -y python3-dnf-plugins-core
-dnf config-manager --set-enabled centos-ovirt45-testing
-dnf config-manager --set-enabled ovirt-45-upstream-testing
-```
-
-### oVirt 4.4 - RPM Repositories and GPG keys
-
-[RPM repository for oVirt 4.4 - Latest stable release](https://resources.ovirt.org/pub/ovirt-4.4/)
-
 See [RPMs and GPG](/download/rpms_and_gpg.html) for older releases, nightlies, mirrors, and GPG keys.