Skip to content

ESP32APRS_T-TWR V0.3 (Factory reset require)
Compare
Choose a tag to compare
@nakhonthai nakhonthai released this 18 Nov 10:28
· 13 commits to main since this release
V0.3
2e87630

History update V0.3a

  • Fix html tag
  • Update jquery to gzip
  • Update path selection

V0.3 (Factory reset require)

  • Update V0.2a-V0.2g
  • Add jquery code in the webservice
  • Add TimeStamp position packet issues #5
  • Add FM Voice & APRS after voice
  • Add factory reset push on boot

ESP32APRS_T-TWR firmware installation (do it first time, next time via the web browser)

  • 1.Connect the USB cable to the LILYGO T-TWR Plus.
  • 2.Press the PWR button for one second to make sure the TWR is powered on
  • 3.Press and hold the BOOT button (without releasing it), then press the RST button, then release the RST button, and finally release the BOOT button
  • 4.Download firmware and open the program ESP32 DOWNLOAD TOOL, set it in the firmware upload program, set the firmware to ESP32APRS_TWR_Vxx.bin, location 0x10000 and partitions.bin at 0x8000 and bootloader.bin at 0x0000 and boot_app0.bin at 0xe000
  • 5.Click the START button in the program and wait for the upload to complete
  • 6.You can enter configuration mode in 3 ways:
  • 6.1 Use rotary switch + display direct config in the menu icon SETTING
  • 6.2 Default config then go to WiFi AP SSID: ESP32APRS PASS: aprsthnetwork or scan QR code in the menu icon QR Web Service (push long switch to WiFi QR connection) and open a web browser to the website. http://192.168.4.1 default web auth USER: admin PASS: admin
  • 6.3 Default config then go to share or set router WiFi SSID: APRSTH PASS: aprsthnetwork or scan QR code in the menu icon 'QR Web Service' (push long switch to web browser) default web auth USER: admin PASS: admin
  • 7.Push BOOT button long >100ms to manual TX Position in the tracker mode

ESP32S3_selector ESP32S3_download

Assets 6
Loading