doc: add new variables to the README

README.md

@@ -1,11 +1,13 @@
 InfiniBand
 ==========
 
-This role installs and configure InfiniBand interfaces.
+This role installs and configures InfiniBand interfaces.
 
 Role Variables
 --------------
 
+### Installation
+
 Define the APT or YUM/DNF repositories, with the path to the GPG key.
 
     # Default apt repository
@@ -17,9 +19,26 @@ Define the APT or YUM/DNF repositories, with the path to the GPG key.
     # Mellanox GPG Key
     infiniband_gpg_key: 'http://www.mellanox.com/downloads/ofed/RPM-GPG-KEY-Mellanox'
 
+The name of the kernel headers package might change across distros. This can be
+defined with:
+
+    infiniband_kernel_headers_package: 'linux-headers'
+
+Some appliances like the NVIDIA DGX run their own software stack. When an
+appliance already manages the installation of the Mellanox OFED drivers, there
+is no need to configure additional repositories or to install the drivers. In
+such cases, the parameters below can be set to False in the host inventory.
+This is also true when using the kernel modules from the distro.
+
+    infiniband_configure_repos: True
+    infiniband_install_kernel_modules: True
+
+### IPoIB
+
 Define the list of interfaces to configure with IPoIB. Each item of the list
-must define the interface name (iface), the offset from the default ipv4
-address and the CIDR prefix.
+must define the interface name (iface), the offset from the default ipv4 address
+and the CIDR prefix. If the list is not defined, the role will not configure any
+IPoIB interface.
 
     infiniband_ipoib_interfaces:
       - iface: 'ib0'
@@ -36,19 +55,37 @@ To compute the offset, use:
     print(f"offset: -{offset}")
     EOF
 
-The name of the kernel headers package might change across distros. This can be
-defined with:
+### Virtualization - SR-IOV
 
-    infiniband_kernel_headers_package: 'linux-headers'
+Configure the list of Mellanox HCAs with the parameters to apply. The pci_bus
+must match the value in /sys/bus/pci/devices/ (e.g.
+/sys/bus/pci/devices/0000:41:00.0/)
 
-Some appliances like the NVIDIA DGX run their own software stack. When an
-appliance already manages the installation of the Mellanox OFED drivers, there
-is no need to configure additional repositories or to install the drivers. In
-such cases, the parameters below can be set to False in the host inventory.
-This is also true when using the kernel modules from the distro.
+    infiniband_hca_devices:
+      - device: mlx5_0
+        pci_bus: '0000:41:00.0'
+        sriov_en: True
+        num_of_vfs: 8
+
+Only parameters `SRIOV_EN` and `NUM_OF_VFS` are supported for now.
+
+Define the prefix to use for the 64-bits IB GUID of VFs.  The role will define
+the GUID with:
+
+ - prefix (40 bits)
+ - "00" (8 bits)
+ - device ID (8 bits): item index in list infiniband_hca_devices above
+ - VF ID (8 bits): index of VF in range(infiniband_hca_devices[*].num_of_vfs)
+
+It is highly recommended to define a value different than the default if you
+plan to configure more than one host with SR-IOV in your IB fabric.
+
+To allow failover in high availability configuration, make sure to use the same
+infiniband_hca_devices and infiniband_guid_prefix for all hosts where a given VM
+could run.
+
+    infiniband_guid_prefix: "4d:69:6c:61:00"
 
-    infiniband_configure_repos: True
-    infiniband_install_kernel_modules: True
 
 Example Playbook
 ----------------