Description:
------------

Stats.mod generates statistics about the users in a channel. It counts
the words that the users have spoken, the lines, actions, smileys,
joins, quits, mode changes, topic changes, nick changes, kicks and how
long the user has been on the channel. Depending on the configuration,
it even logs the user's favourite words and the most used words on
the channel.

The statistics are accessible via public commands (!top10, !stat...)
and via http.


Installation:
-------------

Stats.mod should work with eggdrop 1.8.4 and newer.

The following instructions assume, ~/eggdrop-1.10.0/ is the directory
where you installed your eggdrop from. (of course, other source dirs
will work as well)
Unfortunately, you need to compile stats.mod within your eggdrop source,
so if you removed your original compile directory, you'll have to
compile the whole bot again... sorry.

Put stats.mod.1.15.tar.gz in ~/eggdrop-1.10.0/src/mod/,
and unpack it (tar xfz stats.mod-1.15.tar.gz). Change directory
back to ~/eggdrop-1.10.0/. Type 'make config'. Type 'make', wait until compiling
is done and use 'make install' to install the bot and stats.mod.

Don't forget to copy the language files from ~/eggdrop-1.10.0/src/mod/stats.mod/
to ~/eggdrop/language/ !

All settings can be found in ~/eggdrop-1.10.0/src/mod/stats.mod/stats.conf
I suggest to copy it to your eggdrop directory (probably ~/eggdrop/),
edit it to fit your needs and put a 'source stats.conf' at the end of
your eggdrop config file. This will execute the config file with every
restart or rehash.



Public commands:
----------------

!top10 [ordering]
  lists the top10 users in the channel
!top20 [ordering]
  same as !top10, but lists the top20 (surprise!)
!stat [user]
  shows the statistics for the user
!place [user/ordering]
  shows on which place the user is
!ttop10/!ttop20/!tstat/!tplace
  same as above, but only uses the statistics of today

Only available if log-wordstats is turned on:
!wordstats [user]
  lists the most used words of the user
!topwords
  lists the most used words in the channel
!top10 word <word>
  lists the top10 people who used <word>

Msg commands:
-------------

All public commands are also accessible via /msg.
("/msg <bot> top10 #chan", for example)


Additionally, there are two new commands:

/msg <bot> setemail <email-address>
  sets your email address
/msg <bot> sethomepage <homepage-address>
  sets the URL of your homepage

DCC commands:
-------------

.+suser <user> [host]
  adds a new user to the database
.-suser <user>
  removes a user from the database
.+shost <user> <hostmask>
  adds a new hostmask to <user>
.-shost <user> <hostmask>
  removes a hostmask from <user>
.smatch [mask] [+/-list] [+/-addhosts]
  lists all matching users
.schannel #chan
  displays the stats-users in a channel
.schattr <user> <flags>
  changes the flags for a stats user
.chsusername <oldname> <newname>
  changes the name of a user in the stats database
.purgestats
  deletes stats for non-existent users, empty stats and deletes expired users.
  (m|-)
.sumuser <user1> <user2>
  adds all statistics of user2 to user1 and deletes user2
  (n|-)
.resetuser <user> <channel>
  sets all statistics of user in channel to 0
  (m|-)

.writewebstats
  writes the old, static webfiles
  (m|-)

TCL commands:
-------------

incrstats <user> <chan> <type> <value> [set]
  increases the statistics of type <type> in <chan> for <user> by <value>.
  If <set> is 1, the stats are not increased but set to the value.

getstats <user> <chan> <type> [today]
  returns the stats of <user> in <chan> of type <type>. If <today> is 1,
  the statistics of today are returned.

livestats <port>
  starts listening for livestats connections on port <port>.
  If <port> is "off" or "0", the bot will stop listening.

resetuser <user> <channel>
  sets all statistics of user in channel to 0

resetslang
  removes every language from the memory, so you can cleanly load a new
  set of languages.

loadslang [lang] <langfile>
  loads a language

setchanslang <channel> <language>
  sets the language in <channel> to <language>

nick2suser <nick> <channel>
  returns the username of <nick> in <chan>


Livestats:
----------

If you activate livestats, your bot will listen on a specified port for
http connections. (accessible via http://your.shell.com:8033/, for example
(depending on your configuration, you might have to use your vhost instead))
The webfiles will then be generated on the fly. There will also be a little
channel and user list which makes it easier for your users to browse through
the several channel statistics of your bot.
  This method also uses less cpu power than the frequently written webfiles,
because only the file that is really needed is generated. 
  Use .console +1 to see access, or use the setting stats-loglevel to
change the loglevel.
  Stats.mod is now also able to log the access to a CLF logfile, so you can
use your favourite loganalyzer to generate stats of the stats access. :)

Hint: If you don't want a channel to be listed on the index,
----  just set it +secret.

Static Webfiles:
---------------

If there's really no way to use livestats, stats.mod can also generate static
web files.
In this case, it simply mirrors the whole livestats server into a directory
on your shell. Of course, this takes some time. You bot won't be able to
do anything while it's generating the files, so only use it if there's no
other way. (expect an occasional ping timeout on large channels)
Be sure that you chose an empty output directory.

User management:
----------------

Since v1.3.0, stats.mod has an internal userdatabase. It can automatically
add users and hostmasks to it. Users which are in the eggdrop userfile have a
higher priority, so if someone is known as "bla" by the bot and as "blub"
by stats.mod, his stats will be logged to "bla".
  Hostmasks will be removed from a user if they haven't been used for a
specified time. If all hosts got removed from a user, the user will be erased
completely.
  Note that stats.mod can't know when someone used IDENT or if someone added
new hosts to a user manually. The affected user should cycle the chan to make
sure that he's recognized correctly by stats.mod.

There are two flags for users: +/-list and +/-addhosts:
- If a user has the flag -list, he/she/it won't be listed in the top10. (you
  probably want to set all your bot -list)
- If a user is -addhosts, no new hostmasks will be added to him/her. You'll
  have to add all hosts manually with .+shost. (useful if someone is trying
  to fake you)

Channel settings:
-----------------

If you're using eggdrop 1.5 or later, you have some additional config options
available via .chanset:

+nopubstats
	Disables all channel commands (!top10 etc...)
+quietstats
	Bot will reply with a notice directly to the user instead of
	sending the reply to the channel
+nostats
	Don't log any stats in this chan at all.

Other:
------

There is absolutely NO WARRANTY on this module. I do my best to make it
work properly, but if anything gets screwed up, I'm not responsible. Use
this module at your own risk.

Known problems:
---------------

There can be a problem if you use wordstats on a bot with enabled memory
debugging. The reset of the daily stats might take a long time on slow shells.
Since eggdrop 1.9.0 MEMTBLSIZE is dynamic, but for older bots:
If your bot is on big channels, your memory table might be too small.
Edit src/mem.c and change the #define that sets the size of the memtable
(#define MEMTBLSIZE 25000      /* yikes! */) to a higher value.

Homepage:
---------

https://www.kreativrauschen.com/stats.mod/ and
https://github.com/michaelortmann/stats.mod


Thanks to:
----------

- Fabian for teaching me plenty of things
- Johoho, Fox_Muld and many others for various bug reports and suggestions
- dw for the idea of livestats and for many bug reports
- the eggdev team for developing eggdrop
- everyone who has been using stats.mod for so long