Arduino 2 mode reactive target for steel plates shooting.
Designed to be attached by magnets or tape to the back of metal target with LEDs visible from the front. Piezo element detects hits on the target.
Mode selection is done by turning device on in one of the swich positions.
Each hit is sygnalized by blinking green LED
In random time between waitmin and waitmax the target will lit Green LED and wait for the hit for random time between targettimemin and targettimemax. If hit is registred in that time window, green LED will blink and the timers will reset. If the hit is not registret , the red LED will blink.
- Arduino Digispark
- Piezo disk
- 2 position swich or jumper
- Red and Green LED
- 9V Battery (or other)