Add configuration for M5Stack Core2 with M5Stack Module LoRa868

.github/workflows/CI.yml

@@ -23,6 +23,7 @@ jobs:
           - esp32:esp32:heltec_wireless_stick:PSRAM=disabled
           - esp32:esp32:heltec_wifi_lora_32_V2
           - esp32:esp32:featheresp32
+          - esp32:esp32:m5stack-core2
           - esp32:esp32:adafruit_feather_esp32s2
           - rp2040:rp2040:adafruit_feather:dbgport=Serial
 
@@ -75,7 +76,7 @@ jobs:
           #declare -a required_libs=("https://github.com/matthias-bs/BresserWeatherSensorReceiver.git"
           declare -a required_libs=(
             "[email protected]"
-            "BresserWeatherSensorReceiver@0.23.1"
+            "BresserWeatherSensorReceiver@0.24.0"
             "MCCI LoRaWAN LMIC [email protected]"
             "MCCI Arduino LoRaWAN [email protected]"
             "MCCI Arduino Development Kit [email protected]"
@@ -87,7 +88,9 @@ jobs:
             "[email protected]"
             "[email protected]"
             "[email protected]"
-            "[email protected]")
+            "[email protected]"
+            "[email protected]"
+            "[email protected]")
           for i in "${required_libs[@]}"
           do
             arduino-cli lib install "$i"
@@ -142,6 +145,7 @@ jobs:
                 # hardcoded fqbn, because 'esp32:[email protected]' did not work
                 arduino-cli compile --libraries /home/runner/work/BresserWeatherSensorReceiver --fqbn esp32:esp32:esp32${{ steps.prep.outputs.options }} $example --warnings=${{ steps.prep.outputs.warnings }}
               else
+                #arduino-cli compile --show-properties --libraries /home/runner/work/BresserWeatherSensorReceiver --fqbn ${{ matrix.board }}${{ steps.prep.outputs.options }} $example --warnings=${{ steps.prep.outputs.warnings }}        
                 arduino-cli compile --libraries /home/runner/work/BresserWeatherSensorReceiver --fqbn ${{ matrix.board }}${{ steps.prep.outputs.options }} $example --warnings=${{ steps.prep.outputs.warnings }}
               fi
 

BresserWeatherSensorTTN.ino

@@ -123,6 +123,7 @@
 //          (see https://github.com/matthias-bs/BresserWeatherSensorReceiver/releases/tag/v0.5.1)
 // 20240222 Added weatherSensor.clearSlots() (part of fix for #82), added workaround for (#81)
 // 20240303 Added evaluation of temp_ok/humidity_ok/rain_ok (#82)
+// 20240325 Added configuration for M5Stack Core2 with M5Stack Module LoRa868
 //
 // ToDo:
 // - Split this file
@@ -169,6 +170,9 @@
     #include "src/pico_rtc/pico_rtc_utils.h"
     #include <hardware/rtc.h>
 #endif
+#if defined(ARDUINO_M5STACK_CORE2)
+#include <M5Unified.h>
+#endif
 
 #ifdef RAINDATA_EN
     #include "RainGauge.h"
@@ -280,6 +284,19 @@
     #pragma message("ARDUINO_ADAFRUIT_FEATHER_ESP32 defined; assuming RFM95W FeatherWing will be used")
     #pragma message("Required wiring: A to RST, B to DIO1, D to DIO0, E to CS")
 
+#elif defined(ARDUINO_M5STACK_Core2) || defined(ARDUINO_M5STACK_CORE2)
+    // Note:
+    //    Depending on the environment, selecting M5Stack Core2 defines
+    //    either ARDUINO_M5STACK_Core2 or ARDUINO_M5STACK_CORE2
+    //    so both variants have to be checked!!!
+    #define PIN_LMIC_NSS      33
+    #define PIN_LMIC_RST      26
+    #define PIN_LMIC_DIO0     36
+    #define PIN_LMIC_DIO1     35
+    #define PIN_LMIC_DIO2     cMyLoRaWAN::lmic_pinmap::LMIC_UNUSED_PIN
+    #pragma message("ARDUINO_M5STACK_CORE2 defined; assuming M5Stack Module LoRa868 will be used")
+    #pragma message("Required wiring: DIO1 to GPIO35")
+
 #elif defined(ARDUINO_ADAFRUIT_FEATHER_RP2040)
     // Use pinning for Adafruit Feather RP2040 with RFM95W "FeatherWing" ADA3232
     // https://github.com/earlephilhower/arduino-pico/blob/master/variants/adafruit_feather/pins_arduino.h
@@ -791,6 +808,16 @@ void setup() {
         longSleep        = ((watchdog_hw->scratch[1] & 2) == 2);
         rtcLastClockSync = watchdog_hw->scratch[2];
     #endif
+    #if defined(ARDUINO_M5STACK_CORE2)
+    auto cfg = M5.config();
+    cfg.clear_display = true;  // default=true. clear the screen when begin.
+    cfg.output_power  = true;  // default=true. use external port 5V output.
+    cfg.internal_imu  = false;  // default=true. use internal IMU.
+    cfg.internal_rtc  = true;  // default=true. use internal RTC.
+    cfg.internal_spk  = false;  // default=true. use internal speaker.
+    cfg.internal_mic  = false;  // default=true. use internal microphone.
+    M5.begin(cfg);
+    #endif
 
     // set baud rate
     Serial.begin(115200);