change menu to single without individual sidebars

docs/components/enclosures/spelsberg_TG_PC_1208-6-o.md

@@ -8,7 +8,7 @@ title: Spelsberg TG PC 1208-6-o
 
 <Image alt='Spelsberg TG PC 1208-6-o Housing'
 img={require('./img/housing-spelsberg-closed.jpg')}
-style={{width: '50%', paddingTop: '10px', paddingBottom: '10px'}}/>
+style={{width: '35%', paddingTop: '10px', paddingBottom: '10px'}}/>
 
 * [Product Specifications (external Link)](https://www.spelsberg.com/industrial-housing/plain-with-mounting-cams/20040401/)
 * Size: 122mm (w) x 82mm (l) x 55mm (h)

docs/configuration/lobaro-config-tool.md

@@ -70,7 +70,7 @@ chmod +x lobaro-tool
 ./lobaro-tool
 ```
 
-## Connection Setup
+## Connection setup
 
 Connect your Lobaro Device using the [Lobaro Config Adapter](./usb-config-adapter.md) to the USB-port of your computer.
 
@@ -85,7 +85,7 @@ the
 device is connected to your computer (either COM or ttyUSB), you can alternatively select it explicitly instead of using
 auto.
 
-## Device Configuration
+## Device configuration
 
 <Image alt='Lobaro Configuration Tool - Automatic Connection'
 img={require('./img/lobaro-tool/tool-config-loaded.png')}
@@ -121,7 +121,7 @@ the DevEUI from one device to the other! This can be reverted by using the _Rest
 
 You can watch the rebooting of the Device and check the altered configuration parameters by locking in the **LOGS** Tab.
 
-## Device Uart Logging
+## Device uart logging
 
 <Image alt='Lobaro Configuration Tool - Automatic Connection'
 img={require('./img/lobaro-tool/tool-config-logs.png')}
@@ -171,7 +171,7 @@ If you need to parse the log messages of one of our Devices with your own tools,
 Maintenance Tool by using any serial UART reader. You can find the UART parameters above. Take care on the additional
 control lines (DTR, RTS) to have the right state to keep the device run the firmware.
 
-## Device Firmwareupdate{#fwupdate}
+## Device firmware update{#fwupdate}
 
 Our devices are shipped ready to use with firmware installed on them, so normally you do not need to install firmware
 yourself. However, over time we sometimes add new features to our devices or fix bugs that come up over time. If you
@@ -181,19 +181,36 @@ This page describes how you install firmware on devices that you have physical a
 our devices, those using LoRaWAN and those using NB-IoT/LTE-M.
 
 Our NB-IoT/LTE-M devices also support installing firmware over the air, without physical access. Check the [platform
-documentation](/cloud) for details.
+documentation](/platform) for details.
 
-### Getting the firmware
+### Current firmware identification
 
-You will need the Firmware you want to install to your device as a file on your computer.
+The currently installed firmware can be identified in the device log using the lobaro tool:
+
+<Image alt='Lobaro Configuration Tool - Automatic Connection'
+img={require('./img/lobaro-tool/Version-Identify.png')}
+style={{width:'50%',paddingTop:'10px',paddingBottom:'10px'}} />
+
+Alternatively in the Lobaro IoT Platform:
+
+<Image alt='Lobaro Configuration Tool - Automatic Connection'
+img={require('./img/lobaro-tool/Version-Identify-platform.png')}
+style={{width:'50%',paddingTop:'10px',paddingBottom:'10px'}} />
+
+
+### Getting the firmware update
+
+You will need the new firmware you want to install to your device as a file on your computer.
 
 You can get the latest firmware files from this documentation on the firmware subpage for your specific Lobaro product.
 The files are
 in a format called Hex and are therefore also called Hex-File. The filename always starts with app- and contains the
 version number as well as a short description of its function and the hardware it is used for. So, for example,
-`app-nrf9160-wmbus-TZ2-0.3.1-mcuboot-slot0.hex` contains firmware for our wMBus-Gateway on NB-IoT-Hardware (nrf9160) in
+`app-nrf9160-wmbus-TZ2-0.3.1-mcuboot-slot0.hex` contains the [app-nrf9160-wmbus](components/firmware/app-nrf9160-wmbus/introduction.md) firmware in
 version 0.3.1.
 
+Usually you should only install updates of the same firmware that is currently installed on your Lobaro device.
+
 ### Installing new firmware
 
 <Image alt='Lobaro Configuration Tool - Flash new firmware'

docs/index.md

@@ -1,6 +1,6 @@
 ---
 sidebar_position: 0
-title: Overview
+title: Home
 ---
 # Lobaro Documentation Center
 ---

docs/products/index.md

@@ -1,7 +1,7 @@
 ---
 sidebar_position: 0
 # displayed_sidebar: productsSidebar
-title: Overview
+title: Product Overview
 ---
 
 # Lobaro IoT Products

docs/products/metering-gateways/GW-V3/_category_.json

@@ -0,0 +1,5 @@
+{
+  "label": "wM-Bus GW V3",
+  "position": 0,
+  "collapsed": true
+}

docs/products/metering-gateways/GW-V3/index.md

@@ -0,0 +1,113 @@
+---
+sidebar_position: 1
+#displayed_sidebar: productsSidebar
+title: wM-Bus GW V3 (Battery)
+---
+
+# Wireless M-BUS Gateway V3 (Battery)
+
+<Image alt='Wireless M-BUS Gateway V3 (Battery)'
+img={require('../img/LOB-GW-HYB-WMBUS_wmbus-gateway-v3_Lorawan_NB-IoT_noBorder.jpg')}
+style={{width: '40%', paddingTop: '10px', paddingBottom: '10px'}}/>
+
+## Product Identification
+
+<Image alt='Label Wireless M-BUS Gateway V3 (Battery)'
+img={require('../img/labelv3.png')}
+style={{width: '25%', paddingTop: '10px', paddingBottom: '10px'}}/>
+
+* Product Name: **Wireless M-Bus Gateway V3 (Battery)**
+* Product Type: **LOB-GW-HYB-WMBUS**
+* Lobaro PN: `8000162`
+
+## Description
+
+Battery-powered gateway for regular remote reading of up to 650...800 wireless M-Bus (868 MHz) and Sensus RF consumption
+meters (e.g. water meters, heat cost allocators) via NB-IoT, LTE-M mobile radio or LoRaWAN to the Internet. Suitable for
+indoor and weather-protected outdoor installation. Ideal for intra-year consumption information (uVI) and billing in the
+housing industry.
+
+### Product Components{#components}
+This product is made from the following components, please see the individual common descriptions for
+further details!
+
+:::info[Component Info]
+* **Firmware**:
+  * Manual: [app-nrf9160-wmbus](/components/firmware/app-nrf9160-wmbus/introduction.md)
+  * Latest Firmware Update: [Download (hex file)](https://files.lobaro.com/s/9Zo3KQnXJDHNMgE)
+* **Housing**:
+  * Type: [TG PC 1208-6-o](/components/enclosures/spelsberg_TG_PC_1208-6-o.md)
+:::
+    See [Lobaro Tool description](/configuration/lobaro-config-tool#fwupdate) for information on how to update the firmware.
+
+## Datasheet & Quickstart
+
+| Document Type            | PDF Download                                                                                                                                                 |
+|:-------------------------|:-------------------------------------------------------------------------------------------------------------------------------------------------------------|
+| Data sheet + Quickstart  | [🇩🇪 Download](https://files.lobaro.com/index.php/s/SArz8mXdRTwyCHQ/download) ⎮ [🇬🇧 Download](https://files.lobaro.com/index.php/s/zS2J32EZX6mTxtQ/download) |
+| 1-Page Printable version | [🇩🇪 Download](https://files.lobaro.com/index.php/s/r6M8kEsE2jwEQGx/download) ⎮ [🇬🇧 Download](https://files.lobaro.com/index.php/s/yFiXeAX7yoBH67s/download) |
+
+* Print settings: DIN A4 double sided, flip on short side
+* Folding: You can fold it to a six page leaflet, using the marker next to "Initial operation".
+
+## Product specific details
+
+:::info
+Information provided in this chapter is only valid for the above product unless otherwise noted. In case of doubt,
+the information in this section takes precedence over the general [description of any component](#components).
+:::
+
+### Internal view{#insideview}
+<Image alt='Gateway V3 Internal Components'
+img={require('../img/GW_V3_Internal_Components.png')}
+style={{width: '40%', paddingTop: '10px', paddingBottom: '10px'}}/>
+
+1. Battery connector (XH)
+2. SIM card socket (4FF - nano)
+3. Reset button
+4. Status LED (Blue, Green, Red)
+5. Connector for [USB configuration adapter](/configuration/usb-config-adapter.md)
+6. MicroSD card socket (unused by firmware)
+7. Connector for internal PCB antenna
+8. 3.6V D-Cell battery incl. loop tape 
+9. Pressure compensation element (PCE)
+
+### LED signal patterns
+
+The device has 3 three LEDs (B, G, R = Blue, Green, Red), labeled `Status` on the PCB: 🔵🟢🔴. 
+
+See also item [item (4)](#insideview) of internal view.
+
+#### Patterns during booting/restart
+
+* 🔵⚪🔴 B and R on: Device is in Bootloader Mode (not actively running, remove config adapter press reset to leave
+  Bootloader Mode).
+* ⚪🟢⚪ G on for ~2s and off again: Device just booted, either after power on, reset b button or software, or after a hard
+  failure.
+* ⚪⚪🔴 R flashes repeatedly on and off in 1s interval: critical failure during boot (failed to start application).
+
+#### Patterns during normal operation
+
+* 🔵⚪⚪ B flashes 1s on and 1s off in loop: building LTE connection to mobile provider. Followed by:
+    * ⚪🟢⚪ Short G flash on success.
+    * ⚪⚪🔴 Short R flash after connection failed.
+* There are no patterns during normal LoRaWAN operation.
+
+#### Exceptional patterns
+
+* 🔵⚪🔴/⚪🟢🔴 Quickly changing between R & B and G & B every 5s in a loop: Modem is in connection restriction mode - keep
+  device on power, will fix itself after 30min.
+
+### Battery Lifetime Calculator
+
+Please
+see [online spreadsheet](https://docs.google.com/spreadsheets/d/1BjEO0UShdWuhaDqwDWPEtqszOBqUVfBH85dvtvdCjlA/edit?usp=sharing).
+
+## DoC
+
+* EU declaration of conformity (DoC): [🇬🇧 Download](https://files.lobaro.com/index.php/s/BKTJMPwmcg9Hs3n/download)
+
+
+
+
+

docs/products/metering-gateways/GW-V3/modifications/_category_.json

@@ -0,0 +1,5 @@
+{
+  "label": "Modifications",
+  "position": 0,
+  "collapsed": true
+}

docs/products/metering-gateways/GW-V3/modifications/variant1.md

@@ -0,0 +1,9 @@
+---
+sidebar_position: 1
+#displayed_sidebar: productsSidebar
+title: Ext. antenna
+---
+
+# External antenna modification
+
+Do we want a dedicated page for variants of a product? Or make it a dedicated product page?

docs/products/metering-gateways/wireless-mbus-gateway-v3.md

@@ -50,18 +50,14 @@ further details!
 * Print settings: DIN A4 double sided, flip on short side
 * Folding: You can fold it to a six page leaflet, using the marker next to "Initial operation".
 
-## DoC
-
-* EU declaration of conformity (DoC): [🇬🇧 Download](https://files.lobaro.com/index.php/s/BKTJMPwmcg9Hs3n/download)
-
 ## Product specific details
 
 :::info
 Information provided in this chapter is only valid for the above product unless otherwise noted. In case of doubt,
 the information in this section takes precedence over the general [description of any component](#components).
 :::
 
-### Device Components{#devicecomponents}
+### Internal view{#insideview}
 <Image alt='Gateway V3 Internal Components'
 img={require('./img/GW_V3_Internal_Components.png')}
 style={{width: '40%', paddingTop: '10px', paddingBottom: '10px'}}/>
@@ -80,7 +76,7 @@ style={{width: '40%', paddingTop: '10px', paddingBottom: '10px'}}/>
 
 The device has 3 three LEDs (B, G, R = Blue, Green, Red), labeled `Status` on the PCB: 🔵🟢🔴. 
 
-See also item [(4)](#devicecomponents) under device components listing.
+See also item [item (4)](#insideview) of internal view.
 
 #### Patterns during booting/restart
 
@@ -107,6 +103,10 @@ See also item [(4)](#devicecomponents) under device components listing.
 Please
 see [online spreadsheet](https://docs.google.com/spreadsheets/d/1BjEO0UShdWuhaDqwDWPEtqszOBqUVfBH85dvtvdCjlA/edit?usp=sharing).
 
+## DoC
+
+* EU declaration of conformity (DoC): [🇬🇧 Download](https://files.lobaro.com/index.php/s/BKTJMPwmcg9Hs3n/download)
+
 
 
 

docusaurus.config.ts

@@ -84,13 +84,25 @@ const config: Config = {
         width: '115px'
       },
       items: [
+        {
+          type: 'html',
+          position: 'left',
+          value: '<button onclick="history.back()">⬅️</button>',
+        },
+
+        {
+          type: 'html',
+          position: 'left',
+          value: '<button onclick="history.forward()">➡️</button>',
+        },
         {
           to: 'products/',
           position: 'left',
           label: 'Products',
         },
 
 
+
         {
           to: 'components/',
           position: 'left',
@@ -110,16 +122,8 @@ const config: Config = {
           label: 'IoT Platform',
         },
 
-        {
-          type: 'html',
-          position: 'right',
-          value: '<button onclick="history.back()">⬅️</button>',
-        },
-        {
-          type: 'html',
-          position: 'right',
-          value: '<button onclick="history.forward()">➡️</button>',
-        },
+
+
         {
           to: 'knowledge-base/',
           position: 'right',
@@ -134,15 +138,14 @@ const config: Config = {
           label: 'All Docs',
         },*/
         /*  {to: '/blog', label: 'Blog', position: 'left'},*/
-        /* {
+    /*  {
            href: 'https://github.com/lobaro/iot',
            label: 'GitHub',
            position: 'right',
-         },
-           */
+         },*/
         {
           href: 'https://www.lobaro.de',
-          label: 'Lobaro Homepage',
+          label: 'Homepage',
           position: 'right',
         },
       ],