iGate Configuration
This page contains iGate Mode configurations. You must update the Callsign, Wi-Fi and APRS-IS settings and may keep the other options as they are.
IMPORTANT: Don't forget to click on the "Update" button after making any changes to the options.
Callsign: Your callsign with SSID
Use GPS if Possible: Enable this option if you want to use GPS location for your iGate
GPS Timeout: If GPS is enabled but can not acquire a GPS fix, following latitude and longitude values used after this timeout (seconds).
Latitude: Use Decimal Degrees (Google Maps format), for example: 33.816
Longitude: Use Decimal Degrees (Google Maps format), for example: -111.736
Weather Station: APRS Weather station mode is enabled using on board temperature and humidity sensor.