Skip to content

A BACnet proxy to the building simulations in the BOPTEST framework. Uses BACpypes and Python

Notifications You must be signed in to change notification settings

lazlop/boptest-bacnet-proxy

 
 

Repository files navigation

BOPTEST-BACnet-proxy

A BACnet proxy to the building simulations in the BOPTEST framework. Uses BACpypes and Python.

Overview

The BOPTEST (Building Optimization Performance Testing) framework is a project of the International Building Peformance Simulation Association (IBPSA), the US Department of Energy, several US National Labs, and other collaborators. BOPTEST was created to benchmark building control algorithms, and to make it easier to get started. You don't need to know the in-depth details of building simulation in order to use BOPETST.

BOPTEST builds on Modelica and the Modelica Buildings Library to run high-fidelity physics based building simulations, along with some custom Modelica blocks that use the FMI standard to exchange data between the simulation and the outside world. BOPTEST packages all of the software up along with preconfigured building models into self-contained Docker images. The Docker images contain a REST endpoint built on Flask that can drive the simulation and exchange data between the caller and the simulation, including overriding some control signals and setpoints the simulation is using. The Docker image has everything necessary for the simulation - it includes realistic, granular weather and occupancy data, layout information about the zones and thermal properties of the building, and baseline controls for the building. You can literally make a call to the /initialize endpoint, and then call the /advance endpoint 120*24*365 times, each time telling the /advance endpoint to advance the state of the simulation by 30 seconds, you'll get at the end a simulated history of 1 years' worth of building performance, along with a set of key performance indicaors (KPIs) calculated for the building on how it did for energy usage/occupant comfort/etc, using the baseline control configuration in the system. Happily, it's pretty fast, so you can get a year's worth of simulated building data in only a few minutes/hours of wallclock time.

Of course, the point of BOPTEST is to be able to test different controllers and control algorithms on realistic building configurations, so you can override the control signals and setpoints of the baseline controllers at each call to the /advance end point to test different algorithms. The BOPTEST distribution includes several different preconfigured simulatable buildings, each one called a 'test case'.

But, just because you can run the simulation faster than wallclock time doesn't mean you have to, and that's what we've been experimenting with. This repository has a simple server - the BopTestProxy - that drives a BOPTEST simulation at wallclock speeds. Every 5 seconds of realworld time, the BopTestProxy advances the BOPTEST simulation forward by 5 seconds. To interact with the simulation, the BopTestProxy reads the current state of the simulation out of BOPTEST and makes those values available as BACnet objects. The BopTestProxy can also be written to using BACnet, and any of the "input" points that are overwritten in the proxy and passed in to the BOPTEST simulation. This way, users can interact with the building simulation through the BACnet client or controller of their choice and override setpoints and such, and see physically-correct results in the virtual sensor objects also through BACnet.

The end result is a fully digital building that can be created and interacted with as though it was a real building, using standard protocols.

Getting Started

To run it, follow the install instructions from https://github.com/ibpsa/project1-boptest and run it with the multizone office air testcase,

TESTCASE=multizone_office_simple_air docker compose up

Then, in another terminal, edit the BACpypes.ini file to match the IP address details of your site, and run

python BopTestProxy.py simple.ttl

(remember that ObjectIdentifer property in BACnet must be unique across your entire BACnet installation, so you may need to change the 599 to something else in BACpypes.ini, consult your local BACnet administrator)

Finally, on another machine, use the BACnet client of your choice to observe the state of the simulation throough BACnet and optionally overwrite some control point values to influence the simulation. If you're using BACpypes, remember you'll need a different BACpypes.ini file - use a new ObjectIdentifer here!

(This has to or at least should be a seperate machine - BACnet uses UDP so you can't run the client and the server on the same machine easily, at least not without doing some network configuring - it's easier just to use two machines or two VMs!)

python samples/ReadAllProperties.py 10.0.2.7 analogValue 63

and

python samples/ReadWriteProperty.py 
> write 10.0.2.7 analogValue:63 presentValue 310

Remember that BACnet uses UDP and port 47808 ('BAC0' in hex) so you may need to adjust your firewall rules on both machines.

For a slightly more interesting version, run

python BopTestProxy.py simple.ttl 19740 3600

The first number is the virtual "Start time" for the simulation - in this case, that's 5:29am on the first day in the simulation. The second number is the "warmup time" for the simulation - BOPtest actually starts running the simulation at 4:29am and automatically advances the simulation to 5:29am.

In the 'multizone_office_simple_air' test case, the internal supervisory control algorithm starts a building "unoccupied but preheat" period at 5:31am virtual time, assuming the simulation has been running at least 1 minute (which it will because we started it at 5:29am virtual time)

You'll see an internal setpoint change - it's defined in simple.ttl as

bldg:hvac_oveZonSupSou_TZonHeaSet_u a brick:Zone_Air_Heating_Temperature_Setpoint ;
    brick:hasLocation bldg:hvac_sou_zone ;
    brick:isPointOf bldg:mz_office_fl2_zone_sou ;
    ref:hasExternalReference [ bacnet:object-identifier "analog-value,63" ;
            bacnet:object-name "hvac_oveZonSupSou_TZonHeaSet_u" ;
            bacnet:object-type "analog-value" ;
            bacnet:objectOf bldg:boptest-proxy-device ] 

and if you run

python samples/ReadAllProperties.py 10.0.2.7 analogValue 63
Mon 26 Sep 2022 02:40:39 PM CDT
presentValue = 285.1499938964844
priorityArray = <bacpypes.basetypes.PriorityArray object at 0x7f6969f07850>
    length = 16
    [1]
        null = ()
  <...>
    [16]
        null = ()
relinquishDefault = 0.0

(wait two minutes)
date; python samples/ReadAllProperties.py 10.0.2.7 analogValue 63
Mon 26 Sep 2022 02:43:07 PM CDT
presentValue = 293.1499938964844
priorityArray = <bacpypes.basetypes.PriorityArray object at 0x7f8b3cde7850>
    length = 16
    [1]
        null = ()
<...>
    [16]
        null = ()
relinquishDefault = 0.0

You can also look at other variables - in the simple.ttl brick model, we have an entity bldg:hvac_reaZonSou_TSup_y a brick:Supply_Air_Temperature_Sensor ; which is defined as a BACnet analogInput with instance id 135:

python samples/ReadAllProperties.py 10.0.2.7 analogInput 135
presentValue = 294.76763916015625
units = degreesKelvin

If you overwrite the setpoint in AnalogValue 63 (see the command above) and wait a few minutes, you'll see the supply air temp sensor start to show higher temperatures.

Configuration and Brick Models

The Proxy looks in a Brick model for the test case. The Brick models include the BACnet references necessary for Brick+BACnet-enabled software to interact with the BOPTEST simulation, through the proxy. The proxy queries for everything with a BACnet reference and creates a BACnet object for each of them, using the BACnet object type specified in the model. The proxy then looks at the /measurements and /inputs endpoint of BOPTEST to decide which of the BACnet objects it could potentially update and which are read-only measurements.

In the future, we might be able to pull all of the necessary metadata from BOPTEST directly. At the moment, we for sure want to keep an external Brick model file so we have stable BACnet object instance IDs.

None of the models included in this repo are very complete just yet and are very much a work in progress.

---
title: Node with text
---
graph TD
    BrickModel-- references -->BOPTestAPIDetails
    BrickModel-- configure -->BACnetObjects
    BACnetObjects-- populate -->BACnetNetwork
    BACnetApplication-- connectsTo -->BACnetNetwork
Loading

License

The BopTestProxy.py is a slightly modified version of the OpenWeatherServer.py sample from the BACpypes package, which was written by Joel Bender and was made available under the MIT License.

About

A BACnet proxy to the building simulations in the BOPTEST framework. Uses BACpypes and Python

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 100.0%