Skip to content

Client Configuration ‐ Cemu

Jump to bottom
kmicki edited this page Dec 26, 2023 · 2 revisions

Configuration of Cemu to use SteamDeckGyroDSU

Cemu version: 2.0

  1. Install SteamDeckGyroDSU on Steam Deck
  2. Open Cemu on host PC (or Steam Deck)
  3. Select Options -> Input Settings

image

  1. Select Wii U GamePad as Emulated Controller

image

  1. Click + button near the Controller field.

image

  1. Select API: DSUController.
  2. Type IP of Steam Deck (if Cemu is running on Steam Deck, type 127.0.0.1).
  3. Open the Controller list and wait until Cemu detects the controller (Controller 1 will show up after a while).
  4. Choose Controller 1 and click Add.

image

  1. Make sure that Controller 1 [DSUController] is selected as Controller.

image

  1. Click Settings.
  2. Check Use motion. Click OK.

image

  1. Done.

Remark: All controllers in the Controller dropdown list are used for emulating the Wii U GamePad simultaneously. DSUController will be used for motion only. Another controller has to be added (if not present already, e.g. XInput Controller) to configure button presses/axes etc.

Clone this wiki locally