Dagrs

dagrs are suitable for the execution of multiple tasks with graph-like dependencies. dagrs has the characteristics of high performance and asynchronous execution. It provides users with a convenient programming interface.

What can `dagrs` do

dagrs allows users to easily execute multiple sets of tasks with complex graph dependencies. It only requires: The user defines tasks and specifies the dependencies of the tasks, and dagrs can execute the tasks sequentially in the topological sequence of the graph. For example:

flowchart LR
	A((Task a))-->B
	A-->C
	B((Task b))-->D
	C((Task c))-->D
	B-->F
	C-->E
	D((Task d))-->G
	E((Task e))-->G
	F((Task f))-->G((Task g))

This graph represents the dependencies between tasks, and the graph composed of tasks must satisfy two points:

A graph allows only one point with zero in-degree and zero out-degree(Only one start task and one end task are allowed).
The graph itself is directed, and the user must ensure that there are no loops in the graph, that is, the dependencies of tasks cannot form a closed loop, otherwise the engine will refuse to execute all tasks, for example:
```
flowchart LR
	A-->C
	A((Task a))-->B
	subgraph "Task b, c, and d form a loop"
	B((Task b))-->C
	C((Task c))-->D
	D((Task d))-->B
	end
```
Loading

Among them, each task may produce output, and may also require the output of some tasks as its input.

Try using `dagrs`

dagrs provides two basic task definition methods, which are programming to implement the logic of the task and defining the yaml configuration file. Programmatically implementing the definition of tasks will make the logic of tasks more flexible, and it is also the main method of using dagrs. Next, we will introduce the usage of the two methods in detail.

Make sure the Rust compilation environment is available.

Programmatically implement task definition

Users need to program to implement the Action trait to define the specific logic of the task, and then build a series of DefaultTask.

First, users need to define some specific task logic. There are two ways to define task logic:

Create a closure whose type is Simple, which is suitable for simple scenarios.
Create a type and implement the Complex trait, which is suitable for more complex situations. For example, if the logic of the task is to execute a system command, the command string needs to be recorded in some way. You can create a Command structure with a string attribute inside to store the command string.

You can refer to examples：examples/actions.rs.

In the second step, you need to use the defined task logic to create specific tasks. Here you may need to use the DefaultTask type, which provides users with several ways to create Task. DefaultTask allows you to specify specific task logic for the task and give the task a name. Please refer to the documentation for specific function functions.

In the third step, you need to specify dependencies for the defined series of tasks. Here you need to use the set_predecessors function of DefaultTask. This function requires you to specify a series of predecessor tasks for the current task.

The fourth step is to create a Dag and put all the defined tasks into the Dag scheduler.

Optional step: You can specify an environment variable for Dag. This environment variable is available in all tasks. In some specific tasks, this behavior can be useful.

Finally, you can initialize a logger, and then you can call the start function of Dag to start executing all tasks.

You can refer to an example for the above complete steps: examples/compute_dag.rs

Here is the examples/compute_dag.rs example:

//! Only use Dag, execute a job. The graph is as follows:
//!
//!    ↱----------↴
//!    B -→ E --→ G
//!  ↗    ↗     ↗
//! A --→ C    /
//!  ↘    ↘  /
//!   D -→ F
//!
//! The final execution result is 272.

extern crate dagrs;

use std::sync::Arc;
use dagrs::{Complex, Dag, DefaultTask, EnvVar, Input, Output};

struct Compute(usize);

impl Complex for Compute {
    fn run(&self, input: Input, env: Arc<EnvVar>) -> Output {
        let base = env.get::<usize>("base").unwrap();
        let mut sum = self.0;
        input
            .get_iter()
            .for_each(|i| sum += i.get::<usize>().unwrap() * base);
        Output::new(sum)
    }
}

fn main() {
    // initialization log.
    env_logger::init();

    // generate some tasks.
    let a = DefaultTask::with_action("Compute A", Compute(1));

    let mut b = DefaultTask::with_action("Compute B", Compute(2));

    let mut c = DefaultTask::new("Compute C");
    c.set_action(Compute(4));

    let mut d = DefaultTask::new("Compute D");
    d.set_action(Compute(8));

    let mut e = DefaultTask::with_closure("Compute E", |input, env| {
        let base = env.get::<usize>("base").unwrap();
        let mut sum = 16;
        input
            .get_iter()
            .for_each(|i| sum += i.get::<usize>().unwrap() * base);
        Output::new(sum)
    });
    let mut f = DefaultTask::with_closure("Compute F", |input, env| {
        let base = env.get::<usize>("base").unwrap();
        let mut sum = 32;
        input
            .get_iter()
            .for_each(|i| sum += i.get::<usize>().unwrap() * base);
        Output::new(sum)
    });

    let mut g = DefaultTask::new("Compute G");
    g.set_closure(|input, env| {
        let base = env.get::<usize>("base").unwrap();
        let mut sum = 64;
        input
            .get_iter()
            .for_each(|i| sum += i.get::<usize>().unwrap() * base);
        Output::new(sum)
    });

    // Set up task dependencies.
    b.set_predecessors(&[&a]);
    c.set_predecessors(&[&a]);
    d.set_predecessors(&[&a]);
    e.set_predecessors(&[&b, &c]);
    f.set_predecessors(&[&c, &d]);
    g.set_predecessors(&[&b, &e, &f]);
    // Create a new Dag.
    let mut dag = Dag::with_tasks(vec![a, b, c, d, e, f, g]);
    // Set a global environment variable for this dag.
    let mut env = EnvVar::new();
    env.set("base", 2usize);
    dag.set_env(env);
    // Start executing this dag
    assert!(dag.start().unwrap());
    // Get execution result.
    let res = dag.get_result::<usize>().unwrap();
    println!("The result is {}.", res);
}

explain:

First, we initialize the logger, declare the Compute type, and implement the Complex trait for it. In the rewritten run function, we simply get the output value of the predecessor task and multiply it by the environment variable base. Then accumulate the multiplied result to itself self.0.

Next, we define 6 tasks and show the usage of some functions in the DefaultTask type. Set predecessor tasks for each task.

Then, create a Dag, set a base environment variable for it, and use the start method to start executing all tasks.

Finally we call the start function of Dag to execute all tasks. After the task is executed, call the get_result function to obtain the final execution result of the task.

The graph formed by the task is shown below:

flowchart LR
    A-->B
    A-->C
    B-->D
    B-->F
    C-->D
    C-->E
    D-->F
    E-->F

The execution order is a->c->b->d.

$ cargo run --example compute_dag
[Start] -> Compute A -> Compute B -> Compute D -> Compute C -> Compute F -> Compute E -> Compute G -> [End]
Executing task [name: Compute A, id: 1]
Execution succeed [name: Compute A, id: 1]
Executing task [name: Compute C, id: 3]
Executing task [name: Compute B, id: 2]
Executing task [name: Compute D, id: 4]
Execution succeed [name: Compute C, id: 3]
Execution succeed [name: Compute B, id: 2]
Execution succeed [name: Compute D, id: 4]
Executing task [name: Compute F, id: 6]
Executing task [name: Compute E, id: 5]
Execution succeed [name: Compute F, id: 6]
Execution succeed [name: Compute E, id: 5]
Executing task [name: Compute G, id: 7]
Execution succeed [name: Compute G, id: 7]
The result is 272.

`Yaml` configuration file

A standard yaml configuration file format is given below:

dagrs:
  a:
    name: "Task 1"
    after: [ b, c ]
    cmd: echo a
  b:
    name: "Task 2"
    after: [ c, f, g ]
    cmd: echo b
  c:
    name: "Task 3"
    after: [ e, g ]
    cmd: echo c
  d:
    name: "Task 4"
    after: [ c, e ]
    cmd: echo d
  e:
    name: "Task 5"
    after: [ h ]
    cmd: echo e
  f:
    name: "Task 6"
    after: [ g ]
    cmd: python3 ./tests/config/test.py
  g:
    name: "Task 7"
    after: [ h ]
    cmd: node ./tests/config/test.js
  h:
    name: "Task 8"
    cmd: echo h

These yaml-defined task items form a complex dependency graph. In the yaml configuration file:

The file starts with dagrs
Similar to a, b, c... is the unique identifier of the task
name is a required attribute, which is the name of the task
after is an optional attribute (only the first executed task does not have this attribute), which represents which tasks are executed after the task, that is, specifies dependencies for tasks
cmd is a optional attribute. You need to point out the command to be executed, such as the basic shell command: echo hello, execute the python script python test.py, etc. The user must ensure that the interpreter that executes the script exists in the environment variable. CommandAction is the implementation of the specific execution logic of the script, which is put into a specific Task type. If users want to customize other types of script tasks, or implement their own script execution logic, they can implement the "Action" feature through programming, and when parsing the configuration file, provide the parser with a specific type that implements the Action feature, and the method should be in the form of a key-value pair: <id,action>. Although this is more troublesome, this method will be more flexible.

To parse the yaml configured file, you need to compile this project, requiring rust version >= 1.70:

$ cargo build --release --features=yaml
$ ./target/release/dagrs.exe --help
Usage: dagrs.exe [OPTIONS] --yaml <YAML>

Options:
      --log-path <LOG_PATH>    Log output file, the default is to print to the terminal
      --yaml <YAML>            yaml configuration file path
      --log-level <LOG_LEVEL>  Log level, the default is Info
  -h, --help                   Print help
  -V, --version                Print version

parameter explanation:

The parameter yaml represents the path of the yaml configuration file and is a required parameter.
The parameter log-path represents the path of the log output file and is an optional parameter. If not specified, the log is printed on the console by default.
The parameter log-level represents the log output level, which is an optional parameter and defaults to info.

We can try an already defined file at tests/config/correct.yaml

$ ./target/release/dagrs --yaml=./tests/config/correct.yaml --log-path=./dagrs.log --log-level=info
[Start] -> Task 8 -> Task 5 -> Task 7 -> Task 6 -> Task 3 -> Task 2 -> Task 1 -> Task 4 -> [End]
Executing Task[name: Task 8]
Executing Task[name: Task 5]
Executing Task[name: Task 7]
Executing Task[name: Task 6]
Executing Task[name: Task 3]
Executing Task[name: Task 2]
Executing Task[name: Task 4]
Executing Task[name: Task 1]

You can see an example: examples/yaml_dag.rs. In fact, you can also programmatically read the yaml configuration file generation task, which is very simple, just use the with_yaml function provided by Dag to parse the configuration file.

In addition to these two methods, dagrs also supports advanced task custom configuration.

DefaultTask is a default implementation of the Task trait. Users can also customize tasks and add more functions and attributes to tasks, but they still need to have the four necessary attributes in DefaultTask. YamlTask is another example of Task concrete implementation, its source code is available for reference. No matter how you customize the task type, the customized task type must have the following attributes:
- id: uniquely identifies the task assigned by the global ID assigner
- name: the name of the task
- predecessor_tasks: the predecessor tasks of this task
- action: is a dynamic type that implements the Action trait in user programming, and it is the specific logic to be executed by the task
In addition to yaml-type configuration files, users can also provide other types of configuration files, but in order to allow other types of configuration files to be parsed as tasks, users need to implement the Parser trait. YamlParser source code is available for reference.

examples/custom_parser_and_task.rs is an example of a custom task type and a custom configuration file parser

Analyze the logic of task execution

The execution process of Dag is roughly as follows:

The user gives a list of tasks tasks. These tasks can be parsed from configuration files, or provided by user programming implementations.

Internally generate Graph based on task dependencies, and generate execution sequences based on* rely_graph.

flowchart TD
	subgraph tasks
	direction LR
        A-->B
        A-->C
        B-->D
        B-->F
        C-->D
        C-->E
        D-->F
        E-->F
	end
	subgraph seq
	direction LR
		a(A)-->b(B)-->c(C)-->d(D)-->e(E)-->f(F)
	end
	tasks==Generate execution sequence based on topological sort==>seq

The task is scheduled to start executing asynchronously.

The task will wait to get the resultexecute_statesgenerated by the execution of the predecessor task.

---
title: data flow
---
flowchart LR
	A-->oa((out))
	oa--input-->B
	oa--input-->C
	B-->ob((out))
	ob--input-->D
	ob--input-->F
	C-->oc((out))
	oc--input-->D
	oc--input-->E
	D-->od((out))
	od--input-->F
	E-->oe((out))
	oe--input-->F
	F-->of((out))

If the result of the predecessor task can be obtained, check the continuation statuscan_continue, if it is true, continue to execute the defined logic, if it is false, triggerhandle_error, and cancel the execution of the subsequent task.
After all tasks are executed, set the continuation status to false, which means that the tasks of the dag cannot be scheduled for execution again.

The task execution mode of dagrs is parallel. In the figure, the execution sequence is divided into four intervals by the vertical dividing line. During the overall execution of the task, it will go through four parallel execution stages. As shown in the figure: first task A is executed, and tasks B and C obtain the output of A as the input of their own tasks and start to execute in parallel; similarly, tasks D and E must wait until they obtain the output of their predecessors before starting to execute in parallel; finally, Task F must wait for the execution of tasks B, D, and E to complete before it can start executing.

gantt
	dateFormat X
    axisFormat %s
    title Execution timing
	section Step1
		Task A:0,10
		Task B:0,1
		Task C:0,1
		Task D:0,1
		Task E:0,1
		Task F:0,1
	section Step2
		Task B:10,19
		Task C:10,19
	section Step3
		Task D:19,28
		Task E:19,28
	section Step4
		Task F:28,37

The examples

Basic function usage

examples/compute_dag.rs: A complete usage example of dagrs.

examples/action.rs: Two ways to define the specific logic of a task.

examples/yaml_dag.rs: Example of reading yaml configuration file (needs to enable yaml features).

examples/engine.rs: Using Engine to manage multiple dags with different task types.

Advanced Features

examples/custom_parser_and_task.rs: Custom task types and configuration file parsers.

examples/custom_log.rs: Implement the Logger trait to define your own global logger.

examples/derive_task.rs：Use CustomTask derived macros to help customize task types.

examples/dependencies.rs：Use the dependencies! macro to specify dependencies in an intuitive way and define a series of tasks.

Contribution

The dagrs project relies on community contributions and aims to simplify getting started. To develop dagrs, clone the repository, then install all dependencies, run the test suite and try it out locally. Pick an issue, make changes, and submit a pull request for community review.

What's the contribution

Here are some guidelines for contributing to this project:

Report issues/bugs: If you find any issues or bugs in the project, please report them by creating an issue on the issue tracker. Describe the issue in detail and also mention the steps to reproduce it. The more details you provide, the easier it will be for me to investigate and fix the issue.
Suggest enhancements: If you have an idea to enhance or improve this project, you can suggest it by creating an issue on the issue tracker. Explain your enhancement in detail along with its use cases and benefits. I appreciate well-thought-out enhancement suggestions.
Contribute code: If you want to develop and contribute code, follow these steps:
- Choose an issue to work on. Issues labeled good first issue are suitable for newcomers. You can also look for issues marked help wanted.
- Fork the dagrs repository and create a branch for your changes.
- Make your changes and commit them with a clear commit message. Sign the Developer Certificate of Origin (DCO) by adding a Signed-off-by line to your commit messages. This certifies that you wrote or have the right to submit the code you are contributing to the project.
- Push your changes to GitHub and open a pull request.
- Respond to any feedback on your pull request. The dagrs maintainers will review your changes and may request modifications before merging. Please ensure your code is properly formatted and follows the same style as the existing codebase.
- Once your pull request is merged, you will be listed as a contributor in the project repository and documentation.
Write tutorials/blog posts: You can contribute by writing tutorials or blog posts to help users get started with this project. Submit your posts on the issue tracker for review and inclusion. High quality posts that provide value to users are highly appreciated.
Improve documentation: If you find any gaps in the documentation or think any part can be improved, you can make changes to files in the documentation folder and submit a PR. Ensure the documentation is up-to-date with the latest changes.

Your contributions are highly appreciated. Feel free to ask any questions if you have any doubts or facing issues while contributing. The more you contribute, the more you will learn and improve your skills.

DCO & PGP

To comply with the requirements, contributors must include both a Signed-off-by line and a PGP signature in their commit messages. You can find more information about how to generate a PGP key here.

Git even has a -s command line option to append this automatically to your commit message, and -S to sign your commit with your PGP key. For example:

$ git commit -S -s -m 'This is my commit message'

Rebase the branch

If you have a local git environment and meet the criteria below, one option is to rebase the branch and add your Signed-off-by lines in the new commits. Please note that if others have already begun work based upon the commits in this branch, this solution will rewrite history and may cause serious issues for collaborators (described in the git documentation under “The Perils of Rebasing”).

You should only do this if:

You are the only author of the commits in this branch
You are absolutely certain nobody else is doing any work based upon this branch
There are no empty commits in the branch (for example, a DCO Remediation Commit which was added using -allow-empty)

To add your Signed-off-by line to every commit in this branch:

Ensure you have a local copy of your branch by checking out the pull request locally via command line.
In your local branch, run: git rebase HEAD~1 --signoff
Force push your changes to overwrite the branch: git push --force-with-lease origin main

License

Freighter is licensed under this Licensed:

MIT LICENSE (LICENSE-MIT or https://opensource.org/licenses/MIT)
Apache License, Version 2.0 (LICENSE-APACHE or https://www.apache.org/licenses/LICENSE-2.0)

Contact us

QIUZHILEI email: [email protected]/[email protected]

Name		Name	Last commit message	Last commit date
Latest commit History 203 Commits
.github/workflows		.github/workflows
.vscode		.vscode
benches		benches
derive		derive
examples		examples
src		src
tests		tests
.gitignore		.gitignore
Cargo.toml		Cargo.toml
LICENSE-APACHE		LICENSE-APACHE
LICENSE-MIT		LICENSE-MIT
LICENSE-THIRD-PARTY		LICENSE-THIRD-PARTY
README.md		README.md

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Dagrs

What can `dagrs` do

Try using `dagrs`

Programmatically implement task definition

`Yaml` configuration file

Analyze the logic of task execution

The examples

Basic function usage

Advanced Features

Contribution

What's the contribution

DCO & PGP

Rebase the branch

License

Contact us

About

Releases

Packages

Languages

License

kdesjard/dagrs

Folders and files

Latest commit

History

Repository files navigation

Dagrs

What can dagrs do

Try using dagrs

Programmatically implement task definition

Yaml configuration file

Analyze the logic of task execution

The examples

Basic function usage

Advanced Features

Contribution

What's the contribution

DCO & PGP

Rebase the branch

License

Contact us

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

What can `dagrs` do

Try using `dagrs`

`Yaml` configuration file

Packages