fix #142 and fix #143

Makefile.am

@@ -3,5 +3,9 @@ SUBDIRS = libcork libipset libev src
 else
 SUBDIRS = libcork libipset libasyncns libev src
 endif
+
 ACLOCAL_AMFLAGS = -I m4
 man_MANS = shadowsocks.8
+
+pkgconfiglibdir = $(libdir)/pkgconfig
+pkgconfiglib_DATA = shadowsocks.pc

Makefile.in

@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -14,24 +14,8 @@
 # PARTICULAR PURPOSE.
 
 @SET_MAKE@
+
 VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -53,9 +37,10 @@ host_triplet = @host@
 subdir = .
 DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(top_srcdir)/configure COPYING INSTALL auto/ar-lib \
-	auto/compile auto/config.guess auto/config.sub auto/depcomp \
-	auto/install-sh auto/ltmain.sh auto/missing
+	$(srcdir)/shadowsocks.pc.in $(top_srcdir)/configure COPYING \
+	INSTALL auto/ar-lib auto/compile auto/config.guess \
+	auto/config.sub auto/depcomp auto/install-sh auto/ltmain.sh \
+	auto/missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
 	$(top_srcdir)/m4/inet_ntop.m4 $(top_srcdir)/m4/libtool.m4 \
@@ -69,7 +54,7 @@ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_FILES = shadowsocks.pc
 CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
@@ -80,11 +65,6 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	install-pdf-recursive install-ps-recursive install-recursive \
 	installcheck-recursive installdirs-recursive pdf-recursive \
 	ps-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -113,9 +93,11 @@ am__uninstall_files_from_dir = { \
          $(am__cd) "$$dir" && rm -f $$files; }; \
   }
 man8dir = $(mandir)/man8
-am__installdirs = "$(DESTDIR)$(man8dir)"
+am__installdirs = "$(DESTDIR)$(man8dir)" \
+	"$(DESTDIR)$(pkgconfiglibdir)"
 NROFF = nroff
 MANS = $(man_MANS)
+DATA = $(pkgconfiglib_DATA)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
@@ -286,6 +268,8 @@ top_srcdir = @top_srcdir@
 @BUILD_WINCOMPAT_TRUE@SUBDIRS = libcork libipset libev src
 ACLOCAL_AMFLAGS = -I m4
 man_MANS = shadowsocks.8
+pkgconfiglibdir = $(libdir)/pkgconfig
+pkgconfiglib_DATA = shadowsocks.pc
 all: config.h
 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 
@@ -339,6 +323,8 @@ $(srcdir)/config.h.in:  $(am__configure_deps)
 
 distclean-hdr:
 	-rm -f config.h stamp-h1
+shadowsocks.pc: $(top_builddir)/config.status $(srcdir)/shadowsocks.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -350,18 +336,11 @@ distclean-libtool:
 	-rm -f libtool config.lt
 install-man8: $(man_MANS)
 	@$(NORMAL_INSTALL)
-	@list1=''; \
-	list2='$(man_MANS)'; \
-	test -n "$(man8dir)" \
-	  && test -n "`echo $$list1$$list2`" \
-	  || exit 0; \
-	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
-	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
-	{ for i in $$list1; do echo "$$i"; done;  \
-	if test -n "$$list2"; then \
-	  for i in $$list2; do echo "$$i"; done \
-	    | sed -n '/\.8[a-z]*$$/p'; \
-	fi; \
+	test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
+	@list=''; test -n "$(man8dir)" || exit 0; \
+	{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.8[a-z]*$$/p'; \
 	} | while read p; do \
 	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; echo "$$p"; \
@@ -391,6 +370,24 @@ uninstall-man8:
 	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
 	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
+install-pkgconfiglibDATA: $(pkgconfiglib_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(pkgconfiglibdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfiglibdir)"
+	@list='$(pkgconfiglib_DATA)'; test -n "$(pkgconfiglibdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfiglibdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfiglibdir)" || exit $$?; \
+	done
+
+uninstall-pkgconfiglibDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgconfiglib_DATA)'; test -n "$(pkgconfiglibdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgconfiglibdir)'; $(am__uninstall_files_from_dir)
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -574,10 +571,13 @@ distdir: $(DISTFILES)
 	done
 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 	    $(am__relativize); \
 	    new_distdir=$$reldir; \
@@ -663,7 +663,7 @@ distcheck: dist
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir); chmod u+w $(distdir)
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
 	mkdir $(distdir)/_build
 	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
@@ -729,10 +729,10 @@ distcleancheck: distclean
 	       exit 1; } >&2
 check-am: all-am
 check: check-recursive
-all-am: Makefile $(MANS) config.h
+all-am: Makefile $(MANS) $(DATA) config.h
 installdirs: installdirs-recursive
 installdirs-am:
-	for dir in "$(DESTDIR)$(man8dir)"; do \
+	for dir in "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(pkgconfiglibdir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-recursive
@@ -787,7 +787,7 @@ info: info-recursive
 
 info-am:
 
-install-data-am: install-man
+install-data-am: install-man install-pkgconfiglibDATA
 
 install-dvi: install-dvi-recursive
 
@@ -833,7 +833,7 @@ ps: ps-recursive
 
 ps-am:
 
-uninstall-am: uninstall-man
+uninstall-am: uninstall-man uninstall-pkgconfiglibDATA
 
 uninstall-man: uninstall-man8
 
@@ -850,12 +850,13 @@ uninstall-man: uninstall-man8
 	install install-am install-data install-data-am install-dvi \
 	install-dvi-am install-exec install-exec-am install-html \
 	install-html-am install-info install-info-am install-man \
-	install-man8 install-pdf install-pdf-am install-ps \
-	install-ps-am install-strip installcheck installcheck-am \
-	installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
-	uninstall uninstall-am uninstall-man uninstall-man8
+	install-man8 install-pdf install-pdf-am \
+	install-pkgconfiglibDATA install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags tags-recursive uninstall uninstall-am \
+	uninstall-man uninstall-man8 uninstall-pkgconfiglibDATA
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

aclocal.m4

@@ -1,4 +1,4 @@
-# generated automatically by aclocal 1.11.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.11.3 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
 # 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
@@ -14,8 +14,8 @@
 
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
-[m4_warning([this file was generated for autoconf 2.69.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically `autoreconf'.])])
@@ -38,7 +38,7 @@ AC_DEFUN([AM_AUTOMAKE_VERSION],
 [am__api_version='1.11'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.11.6], [],
+m4_if([$1], [1.11.3], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -54,7 +54,7 @@ m4_define([_AM_AUTOCONF_VERSION], [])
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.6])dnl
+[AM_AUTOMAKE_VERSION([1.11.3])dnl
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
 _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])

auto/ar-lib

@@ -2,7 +2,7 @@
 # Wrapper for Microsoft lib.exe
 
 me=ar-lib
-scriptversion=2012-03-01.08; # UTC
+scriptversion=2012-01-30.22; # UTC
 
 # Copyright (C) 2010, 2012 Free Software Foundation, Inc.
 # Written by Peter Rosin <[email protected]>.
@@ -153,9 +153,7 @@ action=${action#-}
 delete=
 extract=
 list=
-quick=
 replace=
-index=
 create=
 
 while test -n "$action"
@@ -164,10 +162,7 @@ do
     d*) delete=yes  ;;
     x*) extract=yes ;;
     t*) list=yes    ;;
-    q*) quick=yes   ;;
     r*) replace=yes ;;
-    s*) index=yes   ;;
-    S*)             ;; # the index is always updated implicitly
     c*) create=yes  ;;
     u*)             ;; # TODO: don't ignore the update modifier
     v*)             ;; # TODO: don't ignore the verbose modifier
@@ -178,8 +173,8 @@ do
   action=${action#?}
 done
 
-case $delete$extract$list$quick$replace,$index in
-  yes,* | ,yes)
+case $delete$extract$list$replace in
+  yes)
     ;;
   yesyes*)
     func_error "more than one action specified"
@@ -230,7 +225,7 @@ elif test -n "$extract"; then
     done
   fi
 
-elif test -n "$quick$replace"; then
+elif test -n "$replace"; then
   if test ! -f "$orig_archive"; then
     if test -z "$create"; then
       echo "$me: creating $orig_archive"