JFrog Artifactory and Xray Log Analytics with Fluentd and Datadog

The following document describes how to configure Datadog to gather logs, metrics and violations from Artifactory and Xray through the use of FluentD.

Versions Supported

This integration is last tested with Artifactory 7.84.17 and Xray 3.92.7 versions.

DataDog Setup

DataDog setup for this integration can be done by going through the step below to add a new DataDog apiKey or by using an existing DataDog apiKey.
If a DataDog apiKey already exists and can be used for this integration, skip this part and move on to Fluentd Installation to forward logs and metrics to your DataDog account.

If you don't have a DataDog apiKey:

Create an account in DataDog, if one doesn't exist
Follow the official DataDog instructions here how to generate an apiKey that will be used in the following sections

JFrog Metrics Setup

Metrics collection is disabled by default in Artifactory by default. For non-kubernetes installations, to enable metrics in Artifactory, make the following configuration changes to the Artifactory System YAML:

shared:
    metrics:
        enabled: true

artifactory:
    metrics:
        enabled: true

Once this configuration is done and the application is restarted, metrics will be available in Open Metrics Format

💡 Metrics are enabled by default in Xray.

💡 For kubernetes based installs, openMetrics collection is enabled in the helm install commands listed in the sections below

Fluentd Installation

OS / Virtual Machine

Ensure you have access to the Internet from a virtual machine (VM). We recommend installation through FluentD's native OS based package installs:

OS	Package Manager	Link
CentOS/RHEL	Linux - RPM (YUM)	https://docs.fluentd.org/installation/install-by-rpm
Debian/Ubuntu	Linux - APT	https://docs.fluentd.org/installation/install-by-deb
MacOS/Darwin	MacOS - DMG	https://docs.fluentd.org/installation/install-by-dmg
Windows	Windows - MSI	https://docs.fluentd.org/installation/install-by-msi
Gem Install**	MacOS & Linux - Gem	https://docs.fluentd.org/installation/install-by-gem

Gem based install

For a Gem-based install, the Ruby Interpreter must be setup first. You can install the Ruby Interpreter by doing the following:

Install Ruby Version Manager (RVM) outlined in the RVM documentation.
- Use the SUDO command for multi-user installation. For more information, see the RVM troubleshooting documentation.
After the RVM installation is complete, execute the command 'rvm -v' to verify.
Install Ruby v3.3.0 or above with the command rvm install <ver_num>, (for example, rvm install 3.3.0).
Verify the Ruby installation, execute ruby -v, gem installation gem -v and bundler -v to ensure all the components are intact.
Install the FluentD gem with the command gem install fluentd.
After FluentD is successfully installed, install the following plugins.

gem install fluent-plugin-concat
gem install fluent-plugin-datadog
gem install fluent-plugin-jfrog-siem
gem install fluent-plugin-jfrog-metrics
gem install fluent-plugin-jfrog-send-metrics

Configure Fluentd

We rely on environment variables to stream log files to your observability dashboards. Ensure that you fill in the .env file with the correct values. You can download the .env file here.

JF_PRODUCT_DATA_INTERNAL: The environment variable JF_PRODUCT_DATA_INTERNAL must be defined to the correct location. For each JFrog service, you can find its active log files in the $JFROG_HOME/<product>/var/log directory
DATADOG_API_KEY: API Key from Datadog
DATADOG_API_HOST: Your DataDog host based on your DataDog Site Parameter from this list
DATADOG_VERIFY_SSL: false for disabling ssl validation (useful for proxy forwarding or bypassing ssl certificate validation)
DATADOG_COMPRESS_DATA: true for compressing logs and metrics json payloads on outbound to DataDog
JPD_URL: Artifactory JPD URL with the format http://<ip_address>
JPD_ADMIN_USERNAME: Artifactory username for authentication
JFROG_ADMIN_TOKEN: Artifactory Access Token for authentication
COMMON_JPD: This flag should be set as true only for non-Kubernetes installations or installations where the JPD base URL is the same to access both Artifactory and Xray (for example, https://sample_base_url/artifactory or https://sample_base_url/xray)

Apply the .env files and run the fluentd wrapper with the following command, and note that the argument points to the fluent.conf.* file previously configured:

source jfrog.env
./fluentd $JF_PRODUCT_DATA_INTERNAL/fluent.conf.<product_name>

Docker

In order to run FluentD as a docker image to send the logs, violations, and metrics data to Datadog, execute the following commands on the host that runs the docker.

Execute the docker version and docker ps commands to verify that the Docker installation is functional.
If the version and process are listed successfully, build the intended docker image for Datadog using the docker file. You can download [this Dockerfile]https://raw.githubusercontent.com/jfrog/log-analytics-datadog/master/docker-build/Dockerfile to any directory that has write permissions.
Download the docker.env file needed to run Jfrog/FluentD Docker Images for Datadog. You can download [this docker.env]https://raw.githubusercontent.com/jfrog/log-analytics-datadog/master/docker-build/docker.env to the directory where the docker file was downloaded.
Execute the following command to build the docker image: docker build --build-arg SOURCE="JFRT" --build-arg TARGET="DATADOG" -t <image_name>. For example:
```
 docker build --build-arg SOURCE="JFRT" --build-arg TARGET="DATADOG" -t jfrog/fluentd-datadog-rt .'
```
Fill out the necessary information in the docker.env file:
- JF_PRODUCT_DATA_INTERNAL: The environment variable JF_PRODUCT_DATA_INTERNAL must be defined to the correct location. For each JFrog service you will find its active log files in the $JFROG_HOME/<product>/var/log directory
- DATADOG_API_KEY: API Key from Datadog
- DATADOG_API_HOST: Your DataDog host based on your DataDog Site Parameter from this list
- DATADOG_VERIFY_SSL: false for disabling ssl validation (useful for proxy forwarding or bypassing ssl certificate validation)
- DATADOG_COMPRESS_DATA: true for compressing logs and metrics json payloads on outbound to DataDog
- JPD_URL: Artifactory JPD URL of the format http://<ip_address>
- JPD_ADMIN_USERNAME: Artifactory username for authentication
- JFROG_ADMIN_TOKEN: Artifactory Access Token for authentication
- COMMON_JPD: This flag should be set as true only for non-kubernetes installations or installations where JPD base URL is same to access both Artifactory and Xray (ex: https://sample_base_url/artifactory or https://sample_base_url/xray)
Execute 'docker run -it --name jfrog-fluentd-datadog-rt -v <path_to_logs>:/var/opt/jfrog/artifactory --env-file docker.env <image_name>'

The <path_to_logs> should be an absolute path where the Jfrog Artifactory Logs folder resides, such as a Docker based Artifactory Installation like/var/opt/jfrog/artifactory/var/logs on the docker host. For example:
```
 docker run -it --name jfrog-fluentd-datadog-rt -v $JFROG_HOME/artifactory/var/:/var/opt/jfrog/artifactory --env-file docker.env jfrog/fluentd-datadog-rt
```

Kubernetes Deployment with Helm

The recommended installation method for Kubernetes is to utilize the helm chart with the associated values.yaml in this repo.

Product	Example Values File
Artifactory	helm/artifactory-values.yaml
Artifactory HA	helm/artifactory-ha-values.yaml
Xray	helm/xray-values.yaml

Warning

The old docker registry partnership-pts-observability.jfrog.io, which contains older versions of this integration is now deprecated. We'll keep the existing docker images on this old registry until August 1st, 2024. After that date, this registry will no longer be available. Please helm upgrade your JFrog kubernetes deployment in order to pull images as specified on the above helm value files, from the new releases-pts-observability-fluentd.jfrog.io registry. Please do so in order to avoid ImagePullBackOff errors in your deployment once this registry is gone.

Add JFrog Helm repository:

helm repo add jfrog https://charts.jfrog.io
helm repo update

Throughout the exampled helm installations we'll use jfrog-dd as an example namespace. That said, you can use a different or existing namespace instead by setting the following environment variable

export INST_NAMESPACE=jfrog-dd

If you don't have an existing namespace for the deployment, create it and set the kubectl context to use this namespace

kubectl create namespace $INST_NAMESPACE
kubectl config set-context --current --namespace=$INST_NAMESPACE

Generate masterKey and joinKey for the installation

export JOIN_KEY=$(openssl rand -hex 32)
export MASTER_KEY=$(openssl rand -hex 32)

Artifactory ⎈:

Skip this step if you already have Artifactory installed. Else, install Artifactory using the command below
```
helm upgrade --install artifactory jfrog/artifactory \
       --set artifactory.masterKey=$MASTER_KEY \
       --set artifactory.joinKey=$JOIN_KEY \
       --set artifactory.metrics.enabled=true \
       -n $INST_NAMESPACE --create-namespace
```
💡 Metrics collection is disabled by default in Artifactory. Please make sure that you are following the above helm upgrade command to enable them in Artifactory by setting artifactory.metrics.enabled=true. For Artifactory versions <=7.86.x, please enable metrics by setting the flag artifactory.openMetrics.enabled=true

Get the ip address of the newly deployed Artifactory:
```
export SERVICE_IP=$(kubectl get svc -n $INST_NAMESPACE artifactory-artifactory-nginx -o jsonpath='{.status.loadBalancer.ingress[0].ip}')   
echo $SERVICE_IP
```

Create a secret for JFrog's admin token - Access Token using any of the following methods

kubectl create secret generic jfrog-admin-token --from-file=token=<path_to_token_file>

OR

kubectl create secret generic jfrog-admin-token --from-literal=token=<JFROG_ADMN_TOKEN>

For Artifactory installation, download the .env file from here. Fill in the jfrog_helm.env file with correct values.
- JF_PRODUCT_DATA_INTERNAL: Helm based installs will already have this defined based upon the underlying Docker images. Not a required field for k8s installation
- DATADOG_API_KEY: API Key from Datadog
- DATADOG_API_HOST: Your DataDog host based on your DataDog Site Parameter from this list
- DATADOG_VERIFY_SSL: false for disabling ssl validation (useful for proxy forwarding or bypassing ssl certificate validation)
- DATADOG_COMPRESS_DATA: true for compressing logs and metrics json payloads on outbound to DataDog
- JPD_URL: Artifactory JPD URL of the format http://<ip_address>
- JPD_ADMIN_USERNAME: Artifactory username for authentication
- COMMON_JPD: This flag should be set as true only for non-Kubernetes installations or installations where the JPD base URL is the same to access both Artifactory and Xray (for example, https://sample_base_url/artifactory or https://sample_base_url/xray)
Apply the .env files using the helm command below
```
source jfrog_helm.env
```

Postgres password is required to upgrade Artifactory. Run the following command to get the current password

POSTGRES_PASSWORD=$(kubectl get secret artifactory-postgresql -n $INST_NAMESPACE -o jsonpath="{.data.postgresql-password}" | base64 --decode)

Upgrade Artifactory installation using the command below

helm upgrade --install artifactory jfrog/artifactory \
         --set artifactory.joinKey=$JOIN_KEY \
         --set databaseUpgradeReady=true --set postgresql.postgresqlPassword=$POSTGRES_PASSWORD --set nginx.service.ssloffload=true \
         --set datadog.api_key=$DATADOG_API_KEY \
         --set datadog.api_host=$DATADOG_API_HOST \
         --set datadog.compress_data=$DATADOG_COMPRESS_DATA \
         --set datadog.verify_ssl=$DATADOG_VERIFY_SSL \
         --set jfrog.observability.jpd_url=$JPD_URL \
         --set jfrog.observability.username=$JPD_ADMIN_USERNAME \
         --set jfrog.observability.common_jpd=$COMMON_JPD \
         -f helm/artifactory-values.yaml \
         -n $INST_NAMESPACE

Artifactory-HA ⎈:

For HA installation, please create a license secret on your cluster prior to installation.

kubectl create secret generic artifactory-license --from-file=<path_to_license_file>artifactory.cluster.license

Skip this step if you already have Artifactory installed. Else, install Artifactory using the command below

helm upgrade --install artifactory-ha  jfrog/artifactory-ha \
   --set artifactory.masterKey=$MASTER_KEY \
   --set artifactory.joinKey=$JOIN_KEY \
   --set artifactory.license.secret=artifactory-license \
   --set artifactory.license.dataKey=artifactory.cluster.license \
   --set artifactory.metrics.enabled=true \
   -n $INST_NAMESPACE

💡 Metrics collection is disabled by default in Artifactory-HA. Please make sure that you are following the above helm upgrade command to enable them in Artifactory by setting artifactory.metrics.enabled=true. For Artifactory versions <=7.86.x, please enable metrics by setting the flag artifactory.openMetrics.enabled=true

Get the ip address of the newly deployed Artifactory:

export SERVICE_IP=$(kubectl get svc -n $INST_NAMESPACE artifactory-artifactory-nginx -o jsonpath='{.status.loadBalancer.ingress[0].ip}')   
echo $SERVICE_IP

Create a secret for JFrog's admin token - Access Token using any of the following methods

kubectl create secret generic jfrog-admin-token --from-file=token=<path_to_token_file>

OR

kubectl create secret generic jfrog-admin-token --from-literal=token=<JFROG_ADMN_TOKEN>

Download the .env file from here. Fill in the jfrog_helm.env file with correct values.
- JF_PRODUCT_DATA_INTERNAL: Helm based installs will already have this defined based upon the underlying Docker images. Not a required field for k8s installation
- DATADOG_API_KEY: API Key from Datadog
- DATADOG_API_HOST: Your DataDog host based on your DataDog Site Parameter from this list
- DATADOG_VERIFY_SSL: false for disabling ssl validation (useful for proxy forwarding or bypassing ssl certificate validation)
- DATADOG_COMPRESS_DATA: true for compressing logs and metrics json payloads on outbound to DataDog
- JPD_URL: Artifactory JPD URL of the format http://<ip_address>
- JPD_ADMIN_USERNAME: Artifactory username for authentication
- COMMON_JPD: This flag should be set as true only for non-Kubernetes installations or installations where the JPD base URL is the same to access both Artifactory and Xray (for example, https://sample_base_url/artifactory or https://sample_base_url/xray)
Apply the .env files and then run the helm command below
```
source jfrog_helm.env
```

Postgres password is required to upgrade Artifactory. Run the following command to get the current password

POSTGRES_PASSWORD=$(kubectl get secret artifactory-ha-postgresql -n $INST_NAMESPACE -o jsonpath="{.data.postgresql-password}" | base64 --decode)

Upgrade Artifactory HA installation using the command below

helm upgrade --install artifactory-ha  jfrog/artifactory-ha \
    --set artifactory.joinKey=$JOIN_KEY \
    --set artifactory.metrics.enabled=true \
    --set databaseUpgradeReady=true --set postgresql.postgresqlPassword=$POSTGRES_PASSWORD --set nginx.service.ssloffload=true \
    --set datadog.api_key=$DATADOG_API_KEY \
    --set datadog.api_host=$DATADOG_API_HOST \
    --set datadog.compress_data=$DATADOG_COMPRESS_DATA \
    --set datadog.verify_ssl=$DATADOG_VERIFY_SSL \
    --set jfrog.observability.jpd_url=$JPD_URL \
    --set jfrog.observability.username=$JPD_ADMIN_USERNAME \
    --set jfrog.observability.common_jpd=$COMMON_JPD \
    -f helm/artifactory-ha-values.yaml \
    -n $INST_NAMESPACE

Xray ⎈:

Create a secret for JFrog's admin token - Access Token using any of the following methods if it doesn't exist

kubectl create secret generic jfrog-admin-token --from-file=token=<path_to_token_file>

OR

kubectl create secret generic jfrog-admin-token --from-literal=token=<JFROG_ADMN_TOKEN>

For Xray installation, download the .env file from here. Fill in the jfrog_helm.env file with correct values.

JF_PRODUCT_DATA_INTERNAL: Helm based installs will already have this defined based upon the underlying Docker images. Not a required field for k8s installation
DATADOG_API_KEY: API Key from Datadog
DATADOG_VERIFY_SSL: false for disabling ssl validation (useful for proxy forwarding or bypassing ssl certificate validation)
DATADOG_COMPRESS_DATA: true for compressing logs and metrics json payloads on outbound to DataDog
JPD_URL: Artifactory JPD URL of the format http://<ip_address>
JPD_ADMIN_USERNAME: Artifactory username for authentication
COMMON_JPD: This flag should be set as true only for non-Kubernetes installations or installations where the JPD base URL is the same to access both Artifactory and Xray (for example, https://sample_base_url/artifactory or https://sample_base_url/xray)

Apply the .env files and then run the helm command below

source jfrog_helm.env

Generate a master key for xray

export XRAY_MASTER_KEY=$(openssl rand -hex 32)

Use the same joinKey as you used in Artifactory installation to allow Xray node to successfully connect to Artifactory.

helm upgrade --install xray jfrog/xray --set xray.jfrogUrl=$JPD_URL \
       --set xray.masterKey=$XRAY_MASTER_KEY \
       --set xray.joinKey=$JOIN_KEY \
       --set datadog.api_key=$DATADOG_API_KEY \
       --set datadog.api_host=$DATADOG_API_HOST \
       --set datadog.compress_data=$DATADOG_COMPRESS_DATA \
       --set datadog.verify_ssl=$DATADOG_VERIFY_SSL \
       --set jfrog.observability.jpd_url=$JPD_URL \
       --set jfrog.observability.username=$JPD_ADMIN_USERNAME \
       --set jfrog.observability.common_jpd=$COMMON_JPD \
       -f helm/xray-values.yaml \
       -n $INST_NAMESPACE

Dashboards

JFrog Artifactory Dashboard

This dashboard is divided into three sections Application, Audit and Requests

Application - This section tracks Log Volume(information about different log sources) and Artifactory Errors over time(bursts of application errors that may otherwise go undetected)
Audit - This section tracks audit logs help you determine who is accessing your Artifactory instance and from where. These can help you track potentially malicious requests or processes (such as CI jobs) using expired credentials.
Requests - This section tracks HTTP response codes, Top 10 IP addresses for uploads and downloads

JFrog Artifactory Metrics dashboard

This dashboard tracks Artifactory System Metrics, JVM memory, Garbabe Collection, Database Connections, and HTTP Connections metrics

JFrog Xray Logs dashboard

This dashboard provides a summary of access, service and traffic log volumes associated with Xray. Additionally, customers are also able to track various HTTP response codes, HTTP 500 errors, and log errors for greater operational insight

JFrog Xray Violations Dashboard

This dashboard provides an aggregated summary of all the license violations and security vulnerabilities found by Xray. Information is segment by watch policies and rules. Trending information is provided on the type and severity of violations over time, as well as, insights on most frequently occurring CVEs, top impacted artifacts and components.

JFrog Xray Metrics Dashboard

This dashboard tracks System Metrics, and data metrics about Scanned Artifacts and Scanned Components

Demo Requirements

Kubernetes Cluster
Artifactory and/or Xray installed via JFrog Helm Charts
Helm 3

Generating Data for Testing

Partner Integration Test Framework can be used to generate data for metrics.

References

Datadog - Cloud monitoring as a service

Name		Name	Last commit message	Last commit date
Latest commit History 170 Commits
.github/workflows		.github/workflows
docker-build		docker-build
fluentd-installer		fluentd-installer
helm		helm
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
CONTRIBUTING.md		CONTRIBUTING.md
LICENSE		LICENSE
README.md		README.md
fluent.conf.rt		fluent.conf.rt
fluent.conf.xray		fluent.conf.xray
jfrog.env		jfrog.env

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

JFrog Artifactory and Xray Log Analytics with Fluentd and Datadog

Versions Supported

Table of Contents

DataDog Setup

JFrog Metrics Setup

Fluentd Installation

OS / Virtual Machine

Gem based install

Configure Fluentd

Docker

Kubernetes Deployment with Helm

Artifactory ⎈:

Artifactory-HA ⎈:

Xray ⎈:

Dashboards

JFrog Artifactory Dashboard

JFrog Artifactory Metrics dashboard

JFrog Xray Logs dashboard

JFrog Xray Violations Dashboard

JFrog Xray Metrics Dashboard

Demo Requirements

Generating Data for Testing

References

About

Releases

Packages

Contributors 6

Languages

License

jfrog/log-analytics-datadog

Folders and files

Latest commit

History

Repository files navigation

JFrog Artifactory and Xray Log Analytics with Fluentd and Datadog

Versions Supported

Table of Contents

DataDog Setup

JFrog Metrics Setup

Fluentd Installation

OS / Virtual Machine

Gem based install

Configure Fluentd

Docker

Kubernetes Deployment with Helm

Artifactory ⎈:

Artifactory-HA ⎈:

Xray ⎈:

Dashboards

JFrog Artifactory Dashboard

JFrog Artifactory Metrics dashboard

JFrog Xray Logs dashboard

JFrog Xray Violations Dashboard

JFrog Xray Metrics Dashboard

Demo Requirements

Generating Data for Testing

References

About

Topics

Resources

License

Security policy

Stars

Watchers

Forks

Releases

Packages 0

Contributors 6

Languages

Packages