Home

Welcome to the RPi-AP wiki!

# Links [Install packages](https://github.com/j666gak/RPi-AP/wiki/Setup-Guide#step-1---install-packages)

[Configure interface](https://github.com/j666gak/RPi-AP/wiki/Setup-Guide#step-2---configure-interface)

[Configure hostapd](https://github.com/j666gak/RPi-AP/wiki/Setup-Guide#step-3---configure-hostapd)

[Run hostapd config at boot](https://github.com/j666gak/RPi-AP/wiki/Setup-Guide#step-4---run-hostapd-config-at-boot)

[Configure dnsmasq](https://github.com/j666gak/RPi-AP/wiki/Setup-Guide#step-5---configure-dnsmasq)

[Setup ipv4 forwarding](https://github.com/j666gak/RPi-AP/wiki/Setup-Guide#step-6---setup-ipv4-forwarding)

[NAT between eth0 and wlan0](https://github.com/j666gak/RPi-AP/wiki/Setup-Guide#step-7---nat-between-eth0-and-wlan0)

[Apply NAT rules and apply to dhcp at boot](https://github.com/j666gak/RPi-AP/wiki/Setup-Guide#step-8---apply-nat-rules-and-apply-to-dhcp-at-boot)