0821 ifs2

BM/ifs/ifs_common.sh

@@ -49,6 +49,13 @@ export BATCH_NUM=""
 export ERR_ARRAYS="failed error segfault"
 IFS_DMESG_OFFLINE="Other thread could not join"
 
+# Matches arch/x86/include/asm/intel-family.h and
+# drivers/platform/x86/intel/ifs/core.c requirement as follows
+readonly SAPPHIRERAPIDS_X="8f"
+readonly EMERALDRAPIDS_X="cf"
+
+readonly INTEL_FAM6="06"
+
 # CPU_LIST and REMOVE_LIST should be all cpu lists
 ALL_CPUS=""
 CPU_LIST=""
@@ -59,7 +66,11 @@ SIBLINGS="/tmp/siblings"
 TIME_FILE="/tmp/time_ifs"
 export LAST_TIME_FILE="/tmp/time_ifs_bak"
 TIME_FILE_RECORD="/tmp/time_ifs_record"
-INTERVAL_TIME=1860
+FML=""
+MODEL=""
+STEPPING=""
+export CPU_FMS=""
+INTERVAL_TIME=1800
 ERR_NUM=0
 export TRUE="true"
 export FALSE="false"
@@ -159,6 +170,38 @@ is_atom() {
   }
 }
 
+get_cpu_fms()
+{
+  FML=$(grep -m 1 "family" /proc/cpuinfo | awk -F ":" '{printf "%02x",$2;}')
+  MODEL=$(grep -m 1 "model" /proc/cpuinfo | awk -F ":" '{printf "%02x",$2;}')
+  STEPPING=$(grep -m 1 "stepping" /proc/cpuinfo | awk -F ":" '{printf "%02x",$2;}')
+  CPU_FMS="${FML}-${MODEL}-${STEPPING}"
+}
+
+check_cpu_ifs_support_interval_time()
+{
+  get_cpu_fms
+
+  if [[ "$FML" != "$INTEL_FAM6" ]]; then
+    test_exit "CPU family:$FML does not support IFS" "$KSFT_SKIP"
+  fi
+
+  # Ucode has time interval requirement for IFS scan on same CPU as follows:
+  case $MODEL in
+    "$SAPPHIRERAPIDS_X")
+      export INTERVAL_TIME=1800;
+      ;;
+    "$EMERALDRAPIDS_X")
+      export INTERVAL_TIME=30;
+      ;;
+    *)
+      # Set default interval time for other platforms
+      export INTERVAL_TIME=1;
+      append_log "[$INFO] CPU FML:$FML model:0x$MODEL, default: 1s interval time"
+      ;;
+  esac
+}
+
 # Check file content should exist or not
 # Input:$1 file name
 #       $2 expected keyword

BM/ifs/ifs_tests.sh

@@ -30,18 +30,7 @@ run_ifs_tests() {
   local err=""
 
   [[ -z "$NAME" ]] && block_test "There is no ifs test name:$NAME"
-
-  is_spr
-  if [[ "$IS_SPR" == "$TRUE" ]]; then
-    test_print_trc "it's SPR CPU, interval time:1860."
-    export INTERVAL_TIME=1860
-  elif [[ "$IS_SPR" == "$FALSE" ]]; then
-    test_print_trc "CPU is not SPR, interval time:2."
-    export INTERVAL_TIME=2
-  else
-    test_print_wrg "IS_SPR is not true or false!!! Set interval time:1860! DDT BUG!"
-    export INTERVAL_TIME=1860
-  fi
+  check_cpu_ifs_support_interval_time
 
   is_atom
   [[ "$IS_ATOM" == "$TRUE" ]] && {
@@ -96,10 +85,8 @@ run_ifs_tests() {
       modprobe -r "$IFS_NAME"
       enable_ifs_trace
       do_cmd "echo $BATCH_NUM > ${IFS_PATH}/${BATCH}"
-      # Need to wait after boot up 1800s, then could test ifs
-      wait_up_time
-      # At least sleep 2 for common situation
-      do_cmd "sleep 2"
+      # Make sure the interval time before ifs scan
+      do_cmd "sleep $INTERVAL_TIME"
       # Execute normal scan test in first round and need to wait cooling time
       test_print_trc "***** Will run 1st round normal scan: *****"
       init_log "${CASE_NORM}_${BATCH_NUM}"
@@ -115,8 +102,7 @@ run_ifs_tests() {
 
       # Execute the second round scan test in short time
       test_print_trc "***** Will run 2nd round scan in short time: *****"
-      do_cmd "sleep 2"
-      sleep 2
+      do_cmd "sleep $INTERVAL_TIME"
       init_log "$CASE_TWICE"
       dump_ifs_test "$NAME"
       # Record the end time after test which is the real correct end time record

scenario/spr-oe/tests-avx512vbmi

@@ -0,0 +1 @@
+../../BM/avx512vbmi/tests

scenario/spr-oe/tests-cet

@@ -0,0 +1 @@
+../../BM/cet/tests

scenario/spr-oe/tests-ifs

@@ -0,0 +1,24 @@
+# This file collects Intel IFS(In Field SCAN) tests on
+# Intel® Architecture-based platforms.
+# @hw_dep: general_test.sh -t fms -p "ifs_fms_list" @ CPU doesn't support ifs, family model not in ifs/ifs_fms_list
+# @other_dep: general_test.sh -t kconfig -k "CONFIG_INTEL_IFS=m"
+# @other_warn: ifs_tests.sh -m 0 -p all -b 1 -n ifs_batch @ check if SGX init ok and DIMM proper set as IFS relies on enabled SGX
+# ifs_0 scan test cases, it works on SPR(Sapphire Rapids) platform and future server
+ifs_tests.sh -m 0 -p all -n load_ifs
+# Need to set the IFS BIOS and put IFS scan blob image, please check BM/ifs/README.md
+ifs_tests.sh -m 0 -p all -b 1 -n ifs_batch
+ifs_tests.sh -m 0 -p all -b 1 -n legacy_twice_run
+#ifs_tests.sh -m 0 -p all -b 2 -n legacy_twice_run
+#ifs_tests.sh -m 0 -p all -b 3 -n legacy_twice_run
+ifs_tests.sh -m 0 -p all -b 1 -n img_version
+ifs_tests.sh -m 0 -p all -b 1 -n reload_ifs_scan_image
+
+# ifs_1 array BIST(Board Integrated System Test), it works on EMR(Emerald Rapids) and future server
+#ifs_tests.sh -m 1 -p all -n ifs_array_scan
+#ifs_tests.sh -m 1 -p ran -n ifs_array_off_sib -t 10
+#ifs_tests.sh -m 1 -p ran -n ifs_array_offran -t 5
+#ifs_tests.sh -m 1 -p ran -n ifs_array_cpuran_fullload -t 10
+#ifs_tests.sh -m 1 -p ran -b 1 -n ifs_loop -t 500
+
+# Test ifs_0 all available image scan and ifs_1 scan, will skip ifs_1 scan on SPR
+test_ifs.sh

scenario/spr-oe/tests-umip

@@ -0,0 +1 @@
+../../BM/umip/tests

scenario/spr-oe/tests-xsave

@@ -0,0 +1 @@
+../../BM/xsave/tests