Grasspad

hackpads/grasspad/firmware/QMK/grasspad/config.h

@@ -0,0 +1,6 @@
+#define ENCODER_A_PINS { GP1 }
+#define ENCODER_B_PINS { GP2 }
+
+#define I2C_DRIVER I2CD1
+#define I2C1_SDA_PIN GP6
+#define I2C1_SCL_PIN GP7

hackpads/grasspad/firmware/QMK/grasspad/keyboard.json

@@ -0,0 +1,44 @@
+{
+    "manufacturer": "Josh",
+    "keyboard_name": "grasspad",
+    "maintainer": "IM-THE-GRASS",
+    "bootloader": "rp2040",
+    "diode_direction": "ROW2COL",
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true
+    },
+    "matrix_pins": {
+        "cols": ["GP11", "GP3", "GP4", "GP7"],
+        "rows": ["GP8", "GP9", "GP10"]
+    },
+    "processor": "RP2040",
+    "url": "",
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0x0000",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [1, 0], "x": 0, "y": 1},
+                {"matrix": [1, 1], "x": 1, "y": 1},
+                {"matrix": [1, 2], "x": 2, "y": 1},
+                {"matrix": [2, 0], "x": 0, "y": 2},
+                {"matrix": [2, 1], "x": 1, "y": 2},
+                {"matrix": [2, 2], "x": 2, "y": 2},
+                {"matrix": [3, 0], "x": 0, "y": 3},
+                {"matrix": [3, 1], "x": 1, "y": 3},
+                {"matrix": [3, 2], "x": 2, "y": 3}
+            ]
+        }
+    }
+}

hackpads/grasspad/firmware/QMK/grasspad/keymaps/default/keymap.c

@@ -0,0 +1,21 @@
+// Copyright 2023 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /*
+     * ┌───┬───┬───┬───┐
+     * │ 7 │ 8 │ 9 │ / │
+     * ├───┼───┼───┼───┤
+     * │ 4 │ 5 │ 6 │ * │
+     * ├───┼───┼───┼───┤
+     * │ 1 │ 2 │ 3 │ - │
+     * └───┴───┴───┴───┘
+     */
+    [0] = LAYOUT(
+        KC_P7,   KC_P8,   KC_P9,   KC_PSLS,
+        KC_P4,   KC_P5,   KC_P6,   KC_PAST,
+        KC_P1,   KC_P2,   KC_P3,   KC_PMNS
+    )
+};

hackpads/grasspad/firmware/QMK/grasspad/readme.md

@@ -0,0 +1,27 @@
+# grasspad
+
+![grasspad](imgur.com image replace me!)
+
+*A short description of the keyboard/project*
+
+* Keyboard Maintainer: [Josh](https://github.com/IM-THE-GRASS)
+* Hardware Supported: *The PCBs, controllers supported*
+* Hardware Availability: *Links to where you can find this hardware*
+
+Make example for this keyboard (after setting up your build environment):
+
+    make grasspad:default
+
+Flashing example for this keyboard:
+
+    make grasspad:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

hackpads/grasspad/firmware/QMK/grasspad/rules.mk

@@ -0,0 +1,9 @@
+OLED_ENABLE = yes
+OLED_TRANSPORT = i2c
+OLED_DRIVER = ssd1306
+
+
+ENCODER_ENABLE = yes
+ENCODER_MAP_ENABLE = yes
+# required for rp2040
+LTO_ENABLE = yes