Hack Card

[Rafi13082007]

Submission Checklist:

• I am a current high school, middle school, or home schooled student.

  • I am 18 or under
  • I have filled out the verification form (do this for every pull request)
    • or the legacy verification form if the above doesn't work

• I have joined the #electronics channel on Slack

• I made this board from scratch, even if I followed a tutorial

• I have followed the directions in README.md

  • Created a folder under onboard/projects
  • Filled out TEMPLATE.md as README.md inside your project folder
  • Uploaded gerber.zip and schematic.pdf inside your project folder
  • Created a folder called src and uploaded design files
  • Uploaded screenshot of PCB order called cart.png with all costs included
  • I am ordering the smallest batch size (ie. JLCPCB's smallest order is for 5 boards)
  • If outside the US I've checked that I can afford the customs charges in my country (which isn't covered by the grant)

• (Optional) This project is from a tutorial¹.

• [] (Optional) This project is for OnBoard Live².

• (Optional) I'm in a FIRST (FRC, FTC, FLL, etc.) team. The number is: 1884, 1797

Footnotes

1. Projects from a tutorial are 100% fine! We just want to ask so we can count how people are using tutorials. ↩

2. OnBoard Live is a special version of OnBoard where you can earn more money for designing advanced boards. Check out the #onboard-live channel on our Slack! ↩

[prophetorpheus]

Hi, I'm Orpheus Leap! Here to help you review your PR.

projects/HackCard:

Required files

✅	README.md	A description of your project
✅	cart.png
✅	gerber.zip
✅	schematic.pdf	Manually check schematic.pdf
✅	Source files - EasyEDA	Found both PCB and SCH files

You can view a render of your board over on gerber.zip/2d!

Happy OnBoarding!
_{This bot is a simpler helper for common submission types. If there's an error with this, please point it out and someone from the OnBoard team will look at it manually.}

[Rafi13082007]

How long does it take

[LimesKey]

Can you clean up your files, looks like you have duplicates of your gerber and JSON files.

[Rafi13082007]

I've completed the change. I wanted to also ask, do you think its still possible to get the FIRST pcb badge?

[Rafi13082007]

Hello, It's been 3 days

[LimesKey]

Thanks for submitting your PCB pull request for OnBoard! However, it looks like you took a picture of your cart rather than the completed unpaid order. For us to have the full picture of pricing and the PCB your ordering, please follow the steps in this guide here or here:

1. Click "Secure Checkout": After adding your PCB to the cart
2. Enter your shipping information and add a coupon code if you have one, then click "Submit Order", do not add any payment options
3. Close that tab and open a new one to the JLCPCB Order page, then take a rectangular screenshot of the PCB you just submitted. It should show all the details of your order including the price and assembly.

This will allow us to spot any mistakes and give you ways to reduce the cost or customs fee. Congratulations on making the PCB! Please ask in #electronics in the Slack if you need any further help.

[Rafi13082007]

Ive uploaded the new picture as cart.png
I think everything should be fine now

[LimesKey]

You've selected Standard Assembly, this is a much more costly option and is usually never needed for the Hackercard Jam, can you switch to economic assembly?

[Rafi13082007]

I chose standard assembly because my hackercard is double sided

[Rafi13082007]

Just double checked and I dont neet double sided assembly, ill be doing economic now, thanks

[Rafi13082007]

All done, i've uploaded the new gerber and cart png, and everything should be fine now, do I have to fill out a different form for the FIRST PCB badge from https://hackclub.com/onboard/first/

[LimesKey]

You have your QR code on the same copper layer as your antenna, your PCB will not work with this.

[Rafi13082007]

Ive done it again

[LimesKey]

Anyway you can also remove some of the graphics on the copper layers near the antenna? Not all but just a few, it should help with reading the NFC tag better.

[LimesKey]

Can you put in the new price of 29.99$ in your README?

[Rafi13082007]

Changes done again, all graphics are on silk layer now so it shouldnt conflict

[github-actions]

Hi, if you need any assistance, please don't hesitate to ask here or in #electronics on Slack. This pull request is being marked as 'Stalled' for now and will be closed in 3 days if there is no activity.

[Rafi13082007]

Hello, I'm awaiting confirmation whether my grant was approved. I've followed the new steps and uploaded the new files.

[LimesKey]

Hi @Rafi13082007!

I've just sent you your grant for OnBoard. You should have received an invite in your email. There will be instructions on how to use your debit card attached should you need them. Please remember to upload your receipts when you make purchases.

Also, unfortunately, we're unable to offer support with reimbursements for customs fees, including reimbursements using leftover grant funds. Please keep this in mind before you make any purchases. More info in the OnBoard community shipping doc.

I'm looking forward to seeing your PCB be manufactured! Send pictures in the #electronics channel on Slack once you get it! Please don't hesitate to reach out if you have any questions!

[LimesKey]

So sorry for the delay!

[Rafi13082007]

Hello @LimesKey,

No worries, glad it worked out at the end. Thanks for everything.

Also about my previous question, is the FIRST pcb promotion still ongoing?

[LimesKey]

I believe the First PCB promotion and the OnBoard one are the same thing? I'm not quite sure, are you able to ask in #electronics in the Slack?

[Rafi13082007]

Oh I see, I'll ask on slack. Thanks for everything