Rescratched is a continuation of the deprecated Scratch 2.0. This is a PASSION PROJECT and is worked on my own time.
To contribute to rescratched you first must: A. Have a good understanding of ActionScript 3 B. have followed the 2.0 guide at https://mrcomputer1.github.io/scratch-modding C. Not be dumb. If all requirements are met, you can create a pull request and make changes.
Below is the original readme to scratch-flash. vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Scratch 2.0 is now in maintenance mode while the team focuses efforts on Scratch 3.0. While critical issues will be addressed please note that any feature requests or minor issues will not be reviewed until the next major release.
This is the open source version of Scratch 2.0 and the core code for the official version found on http://scratch.mit.edu. This code has been released under the GPL version 2 license. Forks can be released under the GPL v2 or any later version of the GPL.
If you're interested in contributing to Scratch, please take a look at the issues on this repository. Two great ways of helping Scratch are by identifying bugs and documenting them as issues, or fixing issues and creating pull requests. When submitting pull requests please be patient -- the Scratch Team is very busy and it can take a while to find time to review them. The organization and class structures can't be radically changed without significant coordination and collaboration from the Scratch Team, so these types of changes should be avoided.
It's been said that the Scratch Team spends about one hour of design discussion for every pixel in Scratch, but some think that estimate is a little low. While we welcome suggestions for new features in our suggestions forum (especially ones that come with mockups), we are unlikely to accept PRs with new features that we haven't deeply thought through. Why? Because we have a strong belief in the value of keeping things simple for new users. To learn more about our design philosophy, see this forum post or this paper.
- Build at least once using the Gradle instructions listed in the "Building" instructions below.
- TL;DR: run
./gradlew build -Ptarget="11.6"in a terminal (on Windows, replace/with\as usual). - This will download and unpack the necessary SDKs.
- You may need to agree to a few licenses (press
ythenenter). - It may take quite a while and appear to hang at times. Watch disk and network activity to be sure.
- TL;DR: run
- Install Visual Studio Code.
- Install the "ActionScript & MXML" extension (search for
@ext:as3in theExtensionspane).- Reload VS Code when prompted.
- Add the
scratch-flashfolder to the VS Code workspace. - Click "No SDK" then "Add more SDKs to this list...".
- Browse to your home directory, then go into
.gradle, thengradleFx. Choosesdksand close the dialog. - Your list of SDKs should now include something starting with "Apache Flex 4.15.0"; choose that.
You should now be able to build and debug using your usual Visual Studio Code hotkeys. The defaults are Ctrl+Shift+B (or Cmd+Shift+B on Mac) to build and F5 to run.
Note that this will build a SWF which requires a very recent version of Flash, so the IDE build should only be used for development and debugging. The Gradle builds (see below) are configured for compatibility with a broad range of Flash versions.
Check asconfig.json for the configuration settings used by the IDE build.
The Scratch 2.0 build process now uses Gradle to simplify the process of acquiring dependencies: the necessary Flex SDKs will automatically be downloaded and cached for you. The Gradle wrapper is included in this repository, but you will need a Java Runtime Environment or Java Development Kit in order to run Gradle; you can download either from Oracle's Java download page. That page also contains guidance on whether to download the JRE or JDK.
There are two versions of the Scratch 2.0 editor that can be built from this repository. See the following table to
determine the appropriate command for each version. When building on Windows, replace ./gradlew with .\gradlew.
| Required Flash version | Features | Command |
|---|---|---|
| 11.6 or above | 3D-accelerated rendering | ./gradlew build -Ptarget="11.6" |
| 10.2 - 11.5 | Compatibility with older Flash (Linux, older OS X, etc.) | ./gradlew build -Ptarget="10.2" |
A successful build should look something like this (SDK download information omitted):
$ ./gradlew build -Ptarget="11.6"
Defining custom 'build' task when using the standard Gradle lifecycle plugins has been deprecated and is scheduled to be removed in Gradle 3.0
Target is: 11.6
Commit ID for scratch-flash is: e6df4f4
:copyresources
:compileFlex
WARNING: The -library-path option is being used internally by GradleFx. Alternative: specify the library as a 'merged' Gradle dependendency
:copytestresources
:test
Skipping tests since no tests exist
:build
BUILD SUCCESSFUL
Total time: 13.293 secsUpon completion, you should find your new SWF in the build subdirectory.
$ ls -R build
build:
10.2 11.6
build/10.2:
ScratchFor10.2.swf
build/11.6:
Scratch.swfPlease note that the Scratch trademarks (including the Scratch name, logo, Scratch Cat, and Gobo) are property of MIT. For use of these Marks, please see the Scratch Trademark Policy.
Here are a few integrated development environments available with Flash debugging support:
It may be difficult to configure your IDE to use Gradle's cached version of the Flex SDK. To debug the Scratch 2.0 SWF with your own copy of the SDK you will need the Flex SDK version 4.10+, and playerglobal.swc files for Flash Player versions 10.2 and 11.6 added to the Flex SDK.
After downloading playerglobal11_6.swc and playerglobal10_2.swc, move them to
${FLEX_HOME}/frameworks/libs/player/${VERSION}/playerglobal.swc. E.g., playerglobal11_6.swc should be located
at ${FLEX_HOME}/frameworks/libs/player/11.6/playerglobal.swc.
Consult your IDE's documentation to configure it for your newly-constructed copy of the Flex SDK.
If the source is building but the resulting .swf is producing runtime errors, your first course of action should be to download version 4.11 of the Flex SDK and try targeting that. The Apache foundation maintains an installer that lets you select a variety of versions.