Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Update README.md #60

Open
wants to merge 1 commit into
base: master
Choose a base branch
from
Open

Update README.md #60

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion README.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -3,7 +3,7 @@
grblHAL has [many extensions](https://github.com/grblHAL/core/wiki) that may cause issues with some senders. As a workaround for these a [compile time option](https://github.com/grblHAL/core/wiki/Changes-from-grbl-1.1#workaround) has been added that disables extensions selectively.

__IMPORTANT!__ grblHAL defaults to normally closed \(NC\) switches for inputs, if none are connected when testing it is likely that the controller will start in alarm mode.
Temporarily short the Reset, E-Stop and Safety Door<sup>4</sup> inputs to ground or invert the corresponding inputs by setting `$14=73` to avoid that.
Temporarily short the Reset, E-Stop and Safety Door<sup>4</sup> inputs to ground or invert the corresponding inputs by setting `$14=73` to avoid that. Due to the internal pull up resistors on microcontroller the normally closed \(NC\) switches must be connected to GND and the coresponding input of the microcontroller.
Please check out [this Wiki page](https://github.com/grblHAL/core/wiki/Changes-from-grbl-1.1) for additional important information.

Windows users may try [ioSender](https://github.com/terjeio/Grbl-GCode-Sender), binary releases can be found [here](https://github.com/terjeio/Grbl-GCode-Sender/releases).
Expand Down